我把电纸书最烦的几个问题,用一个APP解决了I solved the few most annoying problems with e-readers using a single app.


AI free token/AI免费积分
大家好,你们入手电纸书以后,是不是总会陷入一种“精神内耗”?刚拆封不知道怎么测屏幕坏点亮点,生怕自己中奖;用久了空间越来越小,垃圾文件和重复的书籍越来越多,想清理都无从下手。 
而在日常使用中,想在电纸书上看篇公众号长文,要打开浏览器不断下滑,显示不清晰文字大小不能改,最关键的没网还看不了;你要是手头有好几台不同品牌的设备,互相传书简直是个灾难,连电脑、搞中转……一次两次还能忍,时间长了,想看的书永远不在手边的机器里。
我把电纸书最烦的几个问题,用一个APP解决了
我们买电纸书本来是为了沉下心来看书,结果却把大部分时间,都花在了“折腾”上。

在过去这几个月,我利用业余时间,开发出一款电纸书上的专门应用:电纸书助手。它可以检查屏幕、查询参数、传输文件、阅读计时,甚至还能清理垃圾。

我把电纸书最烦的几个问题,用一个APP解决了

目前它已经上架了汉王、文石、掌阅的官方应用市场,没有上架的品牌,你在应用汇里也可以下载安装。从我收到的反馈看还不错,所以今天我们就来详细聊聊它。

先说大家最关心的屏幕检测。

网上测试屏幕的方法五花八门,有关灯看的,有凑近了瞪眼找的,甚至还有拿手机微距镜头去怼的。麻烦不说,还经常误判——这里多科普一句,你们用微距拍出来的小黑点,很多时候只是墨水屏正常的墨水残留,并不是质量问题。

为了不让大家折腾,在「电纸书助手」里,我把屏幕检测做成了极其简单的“过三关”。

第一关,找瑕疵。按照提示打开全白、全黑和棋盘格界面。有没有坏点、亮点,屏幕安装得正不正,肉眼直接扫过去,一目了然,根本不需要你上微距镜。一句话总结就是,你肉眼看到的才有问题,看不到的就没问题。

我把电纸书最烦的几个问题,用一个APP解决了

只要通过第一关,电纸书就可以确认留下了,后面两关属于是锦上添花。

第二关,看素质。软件中提供了16级灰阶、256级灰阶等等多种测试显示效果的界面。你的电纸书显示素质越好,看到的过渡越细腻、细节越多。

我把电纸书最烦的几个问题,用一个APP解决了

第三关,测刷新率。这两年厂商都在卷刷新率,官方动不动就宣传一秒几十帧,咱们普通人怎么验证?

我在助手里加了一个视觉测试法:比如官方说最快一秒40帧,那我们测试时,就调到最快的刷新模式,把目标帧率调成40,测试10秒,测试方式选数字加黑色方格。它会把屏幕分成40个格子,每1/40秒变黑一个格子。

我把电纸书最烦的几个问题,用一个APP解决了

这样我们肉眼就能大概看出刷新率如何了,要是你想看得更仔细,用手机拍慢速视频回看。当然了,因为咱们是软件测试,做不到实验室般精确 ,比方官方说40帧,咱们给它打个8折,32帧肯定是可以测试出来的。

至于触控、扬声器、麦克风这些常规检测,软件里也有一键测试,跟着点就行,这里就不多啰嗦了。

我把电纸书最烦的几个问题,用一个APP解决了

硬件测试完了,咱们再聊聊日常使用中最让人头疼的痛点——传书。

很多朋友手里不止一台电纸书。当你舒舒服服躺下,想拿起手边的设备看本书时,突然发现文件存在另一台别的品牌的机器里……这时候如果你想跨品牌传过来,往往得爬起来找数据线连电脑,即使是同一个品牌,也经常会传输失败。等书终于传完,你可能也没心思看了。

我把电纸书最烦的几个问题,用一个APP解决了

为了抹平这种设备间的壁垒,我在「电纸书助手」里加上了“文件快传”功能。

只要两台设备都在同一个Wi-Fi下,打开软件,一台点发送、一台点接收。不管是单本书,还是整个文件夹,还是软件安装包、字体,都能一键传输。传输速度只取决于你家的路由器的配置,配置越高,传输越快。

我把电纸书最烦的几个问题,用一个APP解决了

除了设备间互传,我知道还有很多朋友喜欢建立“私人书库”。如果你是囤书党,一定要试试软件里的“网盘同步”功能。

它目前支持百度网盘、坚果云和WebDAV协议,可以同步上传和下载。配置好以后,你可以把不同电纸书里的书籍统一上传在云端,按需同步。这样一来,你的书库就彻底打通了,看到好书上传到网盘,哪怕电纸书上误删除也能随时同步回来。手上要是有多台电纸书,一台上传,其他共享。

我把电纸书最烦的几个问题,用一个APP解决了
“网络阅读”的功能,是给喜欢看公众号文章的朋友准备的。每个品牌提供了把公众号文章发送到电纸书上的功能,但是使用体验都不咋样。你阅读时要不断下划内容,要么一卡一卡的,要么有文字的锯齿影响观感,而且一旦出门没网,文章就打不开了。

在电纸书助手上,你可以像看电子书一样点击左右来翻页,文字没有锯齿也没有残影。要是觉得字小,可以点开阅读模式,文字大小随便调。

最关键的,你可以把文章批量缓存到本地,这样带出门即使没网,也不影响阅读。

我把电纸书最烦的几个问题,用一个APP解决了

还有的朋友想要统计每天的阅读时长,形成正反馈。但是不同软件间的数据不互通,要统计起来很麻烦。我想了一个办法:先打开阅读计时,再打开微信读书、番茄、晋江等等都行,只要你在阅读,它就会慢慢记录你的阅读时间,形成阅读记录。

这听起来似乎是个没啥用的小功能,但当你坚持一段时间,再回过头来看看那些累积的阅读数据,会有一种“电纸书没白买”的成就感。

除了这些,软件上还可以查询电纸书的配置参数,这对于二手电纸书交易时特别有用;还可以清理电纸书上的垃圾、查找占空间的大文件、重复书籍等等,都很容易上手就不多说了。

我把电纸书最烦的几个问题,用一个APP解决了

其实这还只是个开始,我的待办列表里还有更多的功能。比如快速笔记、阅读白噪音、生成年历等等,做好了再单独向大家汇报。

我把电纸书最烦的几个问题,用一个APP解决了

最后,我想聊聊做这个软件的初衷。

我一直认为,电纸书不应该被叫做泡面盖,这是对它最大的侮辱。它值得拥有更好用、更纯粹的专属工具。

我把电纸书最烦的几个问题,用一个APP解决了

而电纸书助手,没有开屏广告,也没有需要付费使用的功能,我就想把它打造成这样的工具。即使以后用户量多了,我也会想办法解决运营的成本,不会向你们收费。你要是不信,可以去看看小程序Kindle管家,我做了8年了,没向用户收过1分钱。

而且只要我在日常看书中碰到了痛点,或者想到新点子,都会不断更新到软件上,咱们一起分享。

我的想法很简单——让喜欢电纸书的朋友,从“折腾设备”的内耗中解放出来,让你手上的电纸书更好用,让它不再被人叫做泡面盖。

毕竟,没有谁比热爱电纸书的人,更懂电纸书了。

我把电纸书最烦的几个问题,用一个APP解决了

所以,如果你遇到了上面我说的痛点,现在就去下载试试。汉王、掌阅、文石的应用市场中已经上架,其他品牌的朋友,可以安装应用汇市场下载。

Hey everyone, do you find yourself constantly stressed out after buying an e-reader? You’re probably worried about whether the screen has dead pixels or bright spots when you first open the box, or frustrated by the ever-decreasing storage space and the accumulation of junk files and duplicate books that are hard to clean up.

Have you ever tried to read a long article from a public account on your e-reader? You have to open the browser and scroll endlessly, which is not only hard to read but also requires an internet connection. Dealing with books across multiple devices or brands is a nightmare that involves connecting to a computer and transferring files back and forth. This can be tolerated a few times, but over the long run, it’s incredibly frustrating.

I solved the few most annoying problems with e-readers using a single app.

We buy e-readers to immerse ourselves in reading, yet we spend most of our time fiddling with the device itself.

Over the past few months, I’ve been working on a dedicated app for e-readers in my spare time, called the E-Reader Assistant. It combines screen inspection, parameter querying, file transfer, reading tracking, and trash cleanup into one convenient tool.

I solved the few most annoying problems with e-readers using a single app.

It is currently available in the official app stores of Hanwang, WenStone, and Zhangyue. For other brands, you can download it from the YingYongHui market. Based on the feedback I’ve received, it seems to be working quite well, so let me break it down for you today.

Let's start with the most concerning issue for everyone: screen detection.

The methods shared online for testing screens are all over the place — some suggest turning off the lights, others say to squint and look close, or even use a macro lens on a smartphone. These methods are not only tedious but often lead to incorrect conclusions. By the way, those black dots you see with a macro lens are usually just natural ink residue on the e-ink display, not a quality issue.

To spare you the trouble, I’ve made screen detection in the E-Reader Assistant as simple as possible — it’s a three-step “pass the test” process.

Step one is finding defects. Follow the prompts to display a full white, full black, and checkerboard pattern. Look for dead pixels, bright spots, or alignment issues — if you can see them with your eyes, they’re there; if you can’t, they aren’t significant enough to worry about.

I solved the few most annoying problems with e-readers using a single app.

As long as you pass the first step, you can be confident the e-reader is acceptable. The second and third steps are just for fine-tuning.

Step two is checking quality. The app provides several test patterns, including 16 and 256 shades of gray, to assess the display’s resolution and contrast.

I solved the few most annoying problems with e-readers using a single app.

Step three is measuring refresh rate. Manufacturers often brag about frames per second (FPS), but how do we verify that? I’ve included a visual test where you select a target FPS (like 40) and watch as the screen divides into blocks that change color — if the FPS is correct, the blocks will update at the rate specified. You can even record a slow-motion video to analyze the timing precisely.

Of course, since this is software-based, it won’t be as precise as a lab test, but it’s good enough to see if your 40 FPS setting is working or if it’s just marketing fluff.

I solved the few most annoying problems with e-readers using a single app.

I solved the few most annoying problems with e-readers using a single app.

Now, let’s move on to a real pain point in daily use: transferring books.

I solved the few most annoying problems with e-readers using a single app.

I solved the few most annoying problems with e-readers using a single app.

To bridge this gap between devices, I added a “File Quick Transfer” feature to the assistant.

I solved the few most annoying problems with e-readers using a single app.

I solved the few most annoying problems with e-readers using a single app.

Furthermore, if you like to maintain a personal library in the cloud, you’ll love the “Cloud Sync” feature. It supports services like Baidu Cloud, Jianguo Cloud, and WebDAV. Once connected, you can upload and download books seamlessly, ensuring that even if you delete a book locally, you can easily recover it from the cloud.

I solved the few most annoying problems with e-readers using a single app.

The “Network Reading” feature is perfect for those who enjoy long articles from public accounts. While e-readers allow you to send articles via email, the reading experience isn’t optimal — you have to scroll continuously, the text is often jagged, and you need an internet connection to read.

With the assistant, you can read these articles page-by-page like a book, with smooth text and adjustable font sizes. Additionally, you can cache the articles locally so you can read them even when you’re offline.

I solved the few most annoying problems with e-readers using a single app.

For avid readers who like to track their time spent reading, the “Reading Timer” is a great addition. It tracks your reading sessions regardless of which app you’re using, helping you maintain reading habits and review your progress over time — a simple way to motivate yourself.

Beyond these, the app also offers device parameter checks (useful if buying second-hand), trash cleanup to remove duplicate books or large files, and more features that are coming in the future.

I solved the few most annoying problems with e-readers using a single app.

I solved the few most annoying problems with e-readers using a single app.

I solved the few most annoying problems with e-readers using a single app.

The E-Reader Assistant is free, has no ads, and I’m committed to keeping it that way even as it grows. I’ve been running a similar service for Kindle users for 8 years without charging, so you can trust me to keep this user-friendly.

If you’re tired of the hassle of managing e-readers, give this a try. It’s available now in the Hanwang, Zhangyue, and WenStone stores, or via the YingYongHui market for other brands.

I solved the few most annoying problems with e-readers using a single app.

I solved the few most annoying problems with e-readers using a single app.

I solved the few most annoying problems with e-readers using a single app.

Finally, I'd like to talk about the initial intention behind developing this software.

I've always believed that e-readers shouldn't be relegated to the status of "instant noodle lids"; that's the greatest insult to them. They deserve a more user-friendly and purer dedicated tool.

I solved the few most annoying problems with e-readers using a single app.

That's exactly what the E-Reader Assistant aims to be. It has no opening ads, nor does it require payment for features. I intend to keep it this way. Even if the user base grows, I'll find ways to cover operating costs without charging you. If you don't believe me, check out the Kindle Butler applet — I've been running it for 8 years without charging a single cent to users.

Moreover, whenever I encounter a pain point or think of a new idea while reading, I'll continually update the software so we can all benefit from it.

My goal is simple: to free e-reader enthusiasts from the hassle of "tinkering with devices" and make your e-reader more functional. I want to ensure it is no longer demeaned as a "bubble cover".

After all, there's no one who understands e-readers better than those who love them.

I solved the few most annoying problems with e-readers using a single app.

So, if you've experienced the issues I mentioned above, download and try it now. It's already available in the app stores for Hanwang, Palmsmart, and Wenshi. Users of other brands can download it from the Application Exchange market.

原文链接: https://mp.weixin.qq.com/s/e6FYih_WBhSvn_PNiX41Ig

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry