原文链接:https://mp.weixin.qq.com/s/pzerPufrcXWvTkaSlpJfnQ
自2021年开始,中小学校根据主管部门要求,禁止学生带手机入校,代替手机的电子学生证应运而生。随着学生进入更高年级,一些淘汰的电子学生证也流入二手市场,比如前一段时间我写过的智能学生证,是海信给智慧校园方案供应商OEM遗留的库存,价格299(点我回顾)。
不少朋友都说价格偏高,我也有这个感觉。直到前两天看到另一台智能学生证,价格仅仅49.8,屏幕有瑕疵的更便宜,只要38.5,而且还包邮。

同样是墨水屏带触控功能,可以插卡打电话,有GPS,可以看书听歌,还支持NFC。除了没有摄像头,功能和海信的那个电子学生证差不多,可是价格还不到它的零头,这才是咱们圾佬的梦中情机呀!那咱们就来扒扒这机子到底咋样?会不会有坑在前面等着咱们?
这机子叫智能学生证S3,型号是RBS22726,生产厂家是读书郎,看网上消息上市时间是2023年初,当时售价1298。
读书郎成立于1999年,以智能教育软硬件产品的生产销售为主,比如学生平板、儿童智能手表等等,我印象里它是以点读机起步的。

S3正面是一块3.5英寸的墨水屏,支持触控,分辨率为360*240,和海信的电子学生证清晰度有一定差距,同样没有背光。
这批机子应该是从学校流出的设备,有的机子上面还有小学名称班级等信息,这有点不负责任,至少应该重置一下再销售。
不过从这点来看,机子处于被绑定的状态,商家也明确说机子被绑定。有网友研究出来解绑方法,解绑的话收费20。

S3支持4G联通、移动和电信,不过预装系统只能拨打设置白名单内的电话。支持NFC,能实现交通和支付功能。
S3定位方面支持北斗+GPS+WiFi+LBS,不过有小伙伴吐槽定位并不准,有一定误差。

机身屏幕下方是四个功能快捷键,背面有一个紧急呼叫键,接口为type-c接口,支持USB2.0。电池容量为1640mah,厂家宣称可待机6天。

有小伙伴对S3进行了拆解,发现主控芯片没有标识,根据系统信息,猜测采用的是紫光展锐的T107,T107发布于2021年,采用单核Cortex-A7架构,主频1.0GHz,主要用于入门级功能机。
这主控已经不是比较拉了,而是拉到底了,我以前写过的热点机以晴Q968,还采用的是八核处理器。
厂家预装基于mocor OS的定制系统,这是紫光展锐推出的软硬件一体的解决方案,主要用于功能机和入门智能机。

S3硬件没有刷机的必要,拆解的小伙伴也看看就放弃了,那原生系统有使用的价值没有?
根据买过的小伙伴评价,这机子已被绑定,不解绑的话阅读功能被锁,要解绑后取消限制才行。
机子只能用TXT格式,并且不是所有TXT都能用,有些会显示乱码。更离谱的是不支持记忆,下次只能从开头从新开始。
听歌的话也只能播放MP3格式,并且不能连续播放。还有小伙伴说屏幕反光严重,影响阅读。

这机子相当于一个半成品,有点还没有开发完成仓促上市的样子,功能还没有以前的功能机完善。
谁的钱也不是大风刮来的,虽然机子便宜,但用处不大,朋友们有啥想法,可以在评论区留言讨论。
Original link: https://mp.weixin.qq.com/s/pzerPufrcXWvTkaSlpJfnQ
Since 2021, primary and secondary schools have banned students from bringing mobile phones into school according to regulatory requirements. Electronic student ID cards have emerged as a replacement for mobile phones. As students move into higher grades, some outdated electronic student IDs have entered the second-hand market, such as the intelligent student ID I wrote about recently, which was OEM'd by Hisense for a smart campus solution provider and sold for 299 (click here to review).
Many friends said the price was too high, and I felt the same way. Until two days ago, I saw another intelligent student ID priced at only 49.8, with a defective screen version even cheaper at 38.5, and both with free shipping.

It also uses an e-ink screen with touch control, supports card insertion for calls, has GPS, can read books and listen to music, and supports NFC. Except for the absence of a camera, its functions are similar to the Hisense electronic student ID, but the price is less than a fraction of it. This is the dream device for us tech-savvy folks! So let's dig into this device to see what it's really like? Will there be any pitfalls waiting for us?
The device is called the Intelligent Student ID S3, model number RBS22726, manufactured by Duluang (Doodle Reader). According to online reports, it was launched in early 2023 with a retail price of 1298.
Duluang was founded in 1999 and specializes in the production and sale of smart education hardware and software products, such as student tablets and children's smart watches. I remember it starting off as a producer of reading pens.

The S3 features a 3.5-inch e-ink screen on the front. It supports touch and has a resolution of 360*240, which is slightly lower in clarity compared to the Hisense electronic student ID. It also lacks a backlight.
These devices appear to have been sourced from schools. Some even have labels indicating the specific school, class, and student name. This is irresponsible; at least the data should be reset before resale.
This also indicates that the devices are in a bound state. The seller clearly states that the device is bound. Some netizens have figured out how to unbind it, charging 20 for the service.

The S3 supports 4G from China Unicom, Mobile, and Telecom. However, the pre-installed system can only dial numbers in the white list. It supports NFC, allowing for transportation and payment functionalities.
In terms of positioning, the S3 supports Beidou, GPS, WiFi, and LBS. However, users have complained that the positioning is inaccurate and has a significant error margin.

There are four function shortcut keys below the screen and an emergency call button on the back. The interface is a Type-C port supporting USB 2.0. The battery capacity is 1640mAh, and the manufacturer claims a standby time of 6 days.

A user disassembled the S3 and found that the main control chip had no label. Based on the system information, it is speculated to be the T107 by UNISOC. The T107, released in 2021, features a single-core Cortex-A7 architecture clocked at 1.0GHz, primarily used for entry-level feature phones.
This chipset is not just outdated; it's bottom-of-the-barrel. The Hotspot Machine Q968 I wrote about previously still used an octa-core processor.
The manufacturer pre-installed a custom system based on mocor OS, a hardware and software solution by UNISOC used for feature phones and entry-level smartphones.

There is no need to root this device. The user who disassembled it took a look and gave up. Is the native system usable?
According to reviews from purchasers, the device is bound, and reading functions are locked until the binding is removed and the restrictions are lifted.
The device only supports TXT format, and not all TXT files work; some display as garbled text. More bizarrely, it has no memory function, so you must start from the beginning every time.
For music, it only plays MP3 format and does not support continuous playback. Users also report that the screen reflects light significantly, affecting readability.

This device is essentially a half-finished product, launched prematurely before its features were fully developed. Its functionality is even worse than that of older feature phones.
Money doesn't grow on trees, even though the device is cheap, its utility is limited. What are your thoughts? Feel free to leave a comment below to discuss.