桌面新宠:DIY墨水屏折腾记Desk Companion: A DIY E-Ink Display Tinkering Journey


AI free token/AI免费积分

本文来源:https://mp.weixin.qq.com/s/EwbBGorbK1BkCmOMafkLYw

如果您不愿意本站收录,请来信告知:13951431913@139.com 或在右方提交评论。

 

前言

最近总觉得办公桌上空荡荡的,少了点能让人会心一笑的小物件。刷小黄鱼时偶然看到一些DIY墨水屏,一下子勾起了动手的念头。

正文

进一步了解,DIY墨水屏已经非常商业化,小黄鱼上从几块钱的标签墨水屏到百元完整DIY墨水屏套件(驱动板、系统固件、源码)资源非常丰富。当然我为DIY乐趣,选择从的标签墨水屏入手。

DIY墨水屏玩法

  1. 1. 方案一:保留墨水屏原硬件,通过刷机实现自定义墨水屏显示内容
  2. 2. 方案二:拆机取屏幕,购买简易驱动板+ESP8266/ESP32开发板,再搞定驱动和固件。
  3. 3. 方案三:拆机取屏幕,购买高度集成驱动板(含ESP8266或ESP32),一般商家已经解决驱动和固件,价格偏高。

方案一刷机方案

设备详细

  • • 型号:4.2 BWR GL340
  • • 主控型号:CC2510
  • • 屏幕型号:SE2417FS051
  •  
图片
图片
图片
  1. 1. 使用ESP32-CC-Tool-Pro 刷入fanhuanji/VUSION4.2BWR_GL340项目中的cc.bin固件
  2. 2. 使用fanhuanji/VUSION4.2BWR_GL340项目的app工具写入图片

看似简单的两步,实践过程中还是有挺多坑。第一原教程使用cc debugger刷机工具,但是......我没有。好在后面发现有国外大神使用esp32完成对cc2510芯片刷机,主要参考:z9m/ESP32-CC-Tool-Pro。第二fanhuanji大佬编译的安卓app不支持android7系统,无奈继续安装android stdio开发工具,从源码一步步debug调试修改。

方案三购买高度集成驱动板

从咸鱼上找了家比较便宜的集成驱动板,价格相对便宜但不提供技术支持,得自己去搞定驱动和固件。好在有交流群,拿到电路图和群资料,电路图和微雪8266驱动板使用相同引脚,所以直接上微雪8266的驱动固件,测试能完美支持。

图片

总结

这一圈折腾下来,电脑里又多了一堆开发环境platformio、Arduino、Android Studio。虽然过程磕磕绊绊,但好在屏幕正常点亮。接下来准备想想显示什么内容,然后让Vibe Code一套应用,再3D打印做个外壳。

参考

ses价签墨水屏折腾-01
fanhuanji/VUSION4.2BWR_GL340
atc1441/ESP_CC_Flasher
z9m/ESP32-CC-Tool-Pro
微雪E-Paper ESP8266 Driver Board
微雪墨水屏简单开发记录

 

Source: https://mp.weixin.qq.com/s/EwbBGorbK1BkCmOMafkLYw

If you do not wish this site to be indexed, please contact us at 13951431913@139.com or submit a comment on the right.

Introduction

Lately, I've noticed a distinct lack of whimsical, conversation-starting objects on my desk. While browsing second-hand marketplaces (Xiaohongshu), I stumbled upon DIY e-ink displays and was immediately inspired to get my hands dirty and create something unique.

Body

After some research, I discovered that DIY e-ink projects have become highly commercialized. From affordable tag screens to complete DIY e-ink kits (including driver boards, system firmware, and source code), the ecosystem is thriving. However, true to my spirit of experimentation, I chose to start from scratch using a repurposed tag screen.

E-Ink DIY Approaches

1. **Hardware Preservation:** Keep the existing e-ink hardware and customize the display content via firmware flashing. 8. **Modular Assembly:** Disassemble the screen, purchase a simple driver board and an ESP8266/ESP32 development board, and write the necessary drivers and firmware. 9. **Integrated Solution:** Disassemble the screen and purchase a highly integrated driver board (often including an ESP8266 or ESP32), which typically comes with pre-installed drivers and firmware, though at a higher cost.

2. Second solution: disassemble the device to obtain the screen, purchase a simple driver board + ESP8266/ESP32 development board, and then handle the driver and firmware.

Approach 1: Firmware Flashing

Device Specifications

* **Model:** 4.2 BWR GL340 * **Controller:** CC2510 * **Screen:** SE2417FS051

![Device Diagram](image0.jpg)

![Device Diagram](image1.jpg)

![Device Diagram](image2.jpg)

图片

图片

图片

Conclusion

This adventure has added several new development environments (PlatformIO, Arduino, Android Studio) to my toolbox. Despite the initial setbacks, the screen is now functional. The next steps involve brainstorming what content to display—perhaps integrating it with Vibe Code—and finally 3D printing a custom housing to complete the project.

References

* ses price tag e-ink tinkering-01 * fanhuanji/VUSION4.2BWR_GL340 * atc1441/ESP_CC_Flasher * z9m/ESP32-CC-Tool-Pro * Waveshare E-Paper ESP8266 Driver Board * Waveshare E-Ink Simple Development Notes

I found a relatively inexpensive integrated driver board on Xianyu (Chinese secondhand marketplace), which is cheaper but does not offer technical support — you have to figure out the driver and firmware yourself. Fortunately, there’s a chat group where I obtained the circuit diagram and shared resources. The circuit diagram uses the same pin configuration as the Waveshare 8266 driver board, so I directly loaded the Waveshare 8266’s driver firmware, which worked perfectly in testing.

总结

After this round of tinkering, my computer now has a pile of development environments: PlatformIO, Arduino, Android Studio. Although the process was bumpy, the screen is now lit up and functioning properly. Next, I plan to figure out what content to display and then apply a Vibe Code application set. Finally, I’ll 3D print a housing for it.

参考

SES price tag e-ink screen project — Part 1. References: fanhuanji/VUSION4.2BWR_GL340, atc1441/ESP_CC_Flasher, z9m/ESP32-CC-Tool-Pro, Waveshare E-Paper ESP8266 Driver Board, Waveshare E-paper Simple Development Record.

图片

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry