不到7.8mm?墨水屏新机官宣,下月发布Under 7.8mm? E-ink phone officially announced, launching next month


AI free token/AI免费积分

比手机还要轻一点的阅读器,这次墨水屏又卷到了什么程度

墨水屏设备卷到这么厚,我有点惊讶。

8英寸的尺寸做到7.8毫米以下,整机重量控制在200克左右,在今年任何一款主流平板上都很难看到这样的数据,但是放到墨水屏产品系列中就另当别论了。近几年来,墨水屏阅读器有一个老毛病是:屏幕越大、机身越厚,就不太方便携带了通勤时塞进包里是可以的,但是揣在大衣口袋里面基本上是不可能了。这次的新机把厚度控制在了7.8毫米以下,实际上就是为了解决“大屏阅读器是否属于随身携带设备”的问题。

官宣信息中还包含一些可以进一步展开的内容:屏幕使用了 300PPI 的 Carta 1300 面板,支持 4096 级压感手写,机身重量控制在 190g 左右。结合下个月正式发布的节点来考虑的话,大致方向已经比较明确——它并不是平板电脑的替代品,而是一个可以让你随身携带、随时使用的阅读和轻办公设备。

为什么厚度比参数更关键

墨水屏产品体验一直被三个问题所限制:刷新率、屏幕大小、整机重量。刷新依靠系统的优化来实现,尺寸由用户自己选择,但是重量和厚度是由物理结构决定的,在过去的几年里进步最慢的就是这两者。

把10英寸的阅读器做到6毫米以内,这是过去三年整个品类都没有跨越过的门槛。新机卡在了7.8毫米以下,说明内部结构、电池布局、主板叠层等方面都进行了重新的设计,并不是只换了块屏幕。

减小了厚度之后,整个机器的使用场景也会发生很大的改变:

  • 通勤场景:地铁上一只手拿着书本不会掉下来,长时间读书也不会觉得手酸。
  • 出差场景:放入电脑包内胆基本没有感觉,在飞机、高铁上连续看两三个小时也不会觉得眼睛累。
  • 办公场景:配合磁吸皮套可以放在桌子上使用,用来做会议记录、文档批注等,比 10 英寸机型更加灵活。

在配置方面要注意到的一些取舍

没有在官方信息中提到的内容,往往是决定是否要等待的重要因素。根据目前公开出来的参数以及同价位段其他产品横向对比的情况来看,可以得出一些结论:

  • 没有公布具体的处理器型号大概会采用瑞芯微或者高通7系中端方案,性能不会和平板一样,但是可以满足阅读、批注、PDF重排的需求。
  • 电池容量大约为3500毫安时加上墨水屏本身的功耗很低,所以续航压力不是很大,但是快充功率大概率还是以18W为主,并不能期望达到手机级别的充电速度。
  • 手写笔是否为标配还存在疑问按照行业的惯例,低配版一般不会赠送笔,如果要使用手写功能的话,预算就要增加200-300元。

横向比较:与现有的产品相比,它有什么不同

目前8英寸墨水屏阅读器的三大代表作是文石Tab8C、掌阅SmartX3和汉王M10。新机的不同之处主要有以下两个方面:上下左右四个方向的压力,以及 1300屏幕所造成的文字间距和对比度改善。

  • 文石Tab8C系统更加开放,可以自由安装第三方APK,但是机身厚度为8.2毫米左右,便携性稍差一些。
  • 掌阅SmartX3续航以及本地书店生态更好一些,封闭系统的优点是更加节能,但是仍然存在厚度的问题。
  • 汉王M10性价比很高,手写体验很好,适合做批注的人用,但是便携性也不好。
如果主要的需求是“带出去、随身读”,那么新机型的薄度优势就比较明显了;而对系统的开放性或者本地书店生态更加重视的话,现有的机型依然各有千秋。

是否要等到下个月的发布会

我个人倾向于:可以看完发布会之后再做决定。

墨水屏这个品类近几年来最大的问题就是厂家在“参数上很努力、体验上很佛系”。刷新率由原来的60Hz提升到了现在的120Hz,听上去很厉害,但是实际翻页残影以及操作延迟的改善程度,并不像是数据那样好。因为这台新机把厚度、重量当作主要卖点,所以厂商也认为:墨水屏的护城河并不是性能问题,而是能不能够真正地成为“随身设备”。

需要注意的一点是:第一批飞机系统的版本一般不会是最后的状态。墨水屏设备系统的校准周期一般为2-3个月左右,在刚开始的时候可能会出现翻页残影控制不一致、PDF重排偶尔卡顿等现象,如果不想急于求成的话,可以等到第二批次固件更新之后再购买比较保险一些。

从价格上看,参照同尺寸产品价格区间来推断的话,8G+128G 版本的价格应该在 2500-2900 元之间,手写笔套装版则可以达到 3200 元左右。如果最后发布的售价低于 2500 元,在 2025 年的墨水屏产品线中它的竞争力就会很强;如果价格超过 3000 元,那么就要和文石 Tab8C、汉王 M10 争抢市场了。

本文提示:本文为个人观点分享,并无任何商业推广之意。市场行情变化很快,本文内容只供读者参考,在下订单时以实际情况为准。如果有涉及第三方平台的链接或购买入口的地方,要留意该平台的相关规定。

A reader lighter than a mobile phone — how far has e-ink screen competition pushed this time

I'm actually surprised that e-ink devices have become this thick.

Achieving under 7.8mm thickness and around 200g weight on an 8-inch display would be nearly impossible on any mainstream tablet this year, but for e-ink products it's a different story. One chronic issue with e-ink readers in recent years has been: the larger the screen, the thicker the body, making it less portable. You can slip it in a bag for your commute, but there's absolutely no way to tuck it into a coat pocket. This new device keeps thickness under 7.8mm precisely to solve the question of whether a large-screen reader qualifies as a carry-along device.

Official information also includes expandable details: the screen uses a 300PPI Carta 1300 panel, supports 4096-level pressure-sensitive handwriting, and the body weight is controlled at around 190g. Considering the official launch next month, the general direction is fairly clear — this is not a tablet replacement, but rather a reading and light office device you can carry with you and use anytime.

Why thickness matters more than parameters

E-ink product experience has long been constrained by three issues: refresh rate, screen size, and overall weight. Refresh rate relies on system optimization, screen size is user-selected, but weight and thickness are determined by physical structure — and these two have improved the slowest over the past few years.

Getting a 10-inch reader under 6mm has been a threshold no product in this category has crossed in the past three years. The new device under 7.8mm indicates that internal structure, battery layout, and motherboard stacking have all been redesigned, not just a screen swap.

After reducing thickness, the entire machine's usage scenarios will change significantly:

Commute scenario: holding a book one-handed on the subway won't make it drop, and reading for extended periods won't tire your hand.

Business trip scenario: placing it in a laptop bag's inner sleeve is nearly imperceptible, and reading continuously for two to three hours on a plane or high-speed rail won't strain your eyes.

Office scenario: paired with a magnetic case it can sit on a desk for meeting notes and document annotations, more flexible than 10-inch models.

Trade-offs worth noting in the specifications

Content not mentioned in official information is often what determines whether to wait. Based on currently publicized parameters and cross-comparisons with other products in the same price range, some conclusions can be drawn:

No specific processor model announced — likely a Rockchip or Qualcomm 7-series mid-range solution. Performance won't match tablets, but it will handle reading, annotations, and PDF reflow adequately.

Battery capacity approximately 3500mAh — given e-ink's inherently low power consumption, battery life pressure is minimal, but fast charging will likely remain at 18W, so don't expect smartphone-level charging speeds.

Whether the stylus is included standard is still uncertain — by industry convention, lower-tier versions typically don't bundle a pen, meaning budget needs to increase by ¥200–300 if handwriting functionality is desired.

Horizontal comparison: what differs from existing products

The current three leading 8-inch e-ink readers are the BOOX Tab8C, iReader SmartX3, and Hanvon M10. The new device differs mainly in two aspects: pressure sensing in all four directions (up, down, left, right), and improved text spacing and contrast from the Carta 1300 panel.

The BOOX Tab8C offers a more open system allowing third-party APK installation, but at around 8.2mm thickness its portability is somewhat compromised.

The iReader SmartX3 has better battery life and a stronger local bookstore ecosystem; the closed system's advantage is greater energy efficiency, though thickness remains an issue.

The Hanvon M10 offers strong cost-performance and excellent handwriting experience, suitable for annotation-heavy users, but portability is also poor.

If the primary need is "carry out and read on the go," the new model's thinness advantage is pronounced; if system openness or local bookstore ecosystem matters more, existing models each have their merits.

Whether to wait for next month's launch event

My personal inclination: review the launch event before making a decision.

The biggest issue in the e-ink category over recent years has been manufacturers' effort on "parameters but not on experience." Refresh rates improved from 60Hz to 120Hz — impressive on paper — but actual improvements in page-turn ghosting and operation latency don't match the data. Since this new device positions thickness and weight as its main selling points, the manufacturer clearly believes: the e-ink moat isn't performance, but whether it can truly become a "carry-along device."

One important note: early-flight system versions are rarely the final state. E-ink device system calibration typically takes 2–3 months; initially there may be inconsistent page-turn ghosting control and occasional PDF reflow stutters. If you're not in a hurry, waiting for the second firmware batch before purchasing is safer.

From a pricing perspective, referencing similar-size product ranges, the 8GB+128GB version should land between ¥2500–2900, while the stylus bundle version could reach around ¥3200. If the final price falls below ¥2500, it will be highly competitive in the 2025 e-ink lineup; if it exceeds ¥3000, it will directly compete with the BOOX Tab8C and Hanvon M10.

Disclaimer: This article represents personal opinion and contains no commercial promotion. Market conditions change rapidly; content is for reference only — please verify actual conditions before ordering. Where third-party platform links or purchase entries appear, be aware of that platform's relevant policies.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry