本文来源:https://mp.weixin.qq.com/s/Osa4q5NpBw2z7uv2IchD3w
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。



Source: https://mp.weixin.qq.com/s/Osa4q5NpBw2z7uv2IchD3w If there is a copyright issue, please email me at 13951431913#139.com or submit a comment on the right.
Recently, I noticed a magical phenomenon in the second-hand e-ink screen market: the price of the XiaoYuan S1 learning e-ink screen has mysteriously increased by 30% to 40%.
The root cause is the emergence of a method to flash the device to the BOOX platform.
The hardware of the XiaoYuan S1 is actually very similar to some BOOX models, but they have completely different factory configurations. The XiaoYuan S1 is a closed learning platform for students, excelling in practice tests and error notebooks, but it is impossible to install third-party software. BOOX, on the other hand, uses an open Android system and focuses on reading books, allowing users to install any reading app. New BOOX devices are also significantly more expensive.
After the flashing method was released, the second-hand market price skyrocketed. The XiaoYuan S1, which was originally only suitable for students, was transformed into an open e-reader. On Xianyu, not only did the bare device prices rise, but sellers who offered pre-flashing services were also able to charge a premium.
The most ridiculous thing is that some well-conditioned, flashed S1 devices are now priced higher than the newer XiaoYuan S2. Early buyers who purchased the device at a low price have unintentionally experienced a significant appreciation in value.
However, flashing is inherently a risky endeavor for enthusiasts. Once the device is flashed to the BOOX platform, all the original learning features are lost, leaving only reading capabilities. The flashing process itself is not foolproof, and a single mistake can brick the device. Therefore, it is not recommended for novices to attempt it themselves. Even when purchasing a pre-flashed device, one must carefully inspect the screen and overall condition for any hidden defects.
At the current price point, it is not advisable to force the purchase of the XiaoYuan S1. It is better to wait and see.
In the same market, there are more cost-effective options, such as the Yunsi Zhixue e-ink version, which can be had for over 300 RMB. This device, also from an educational background, supports the unlocking of an open platform and provides sufficient reading experience. Compared to the inflated price of the XiaoYuan S1, it is a much better value. However, since these units are likely returned devices, one must inquire about the unlock status and check the screen for spots or scratches before purchasing.
There is no need to focus on the overpriced models; with diligent searching, you will eventually find a suitable device. If any of the readers have experience with flashed e-ink screens, please share your thoughts in the comments section.