
创客自制主板,用树莓派 CM5 复活 15 年前的惠普服务器
没人喜欢丢弃仍有很多可用部件的旧硬件,而几乎所有人都喜欢漂亮的 DIY 电子项目。这两点在一位创客身上完美结合——他自制了一块主板,用来复活自己那台年代久远的惠普 ProLiant N40L 微型服务器。
这台机器的板载主板与 SoC 实在过于老旧,于是他做了合乎逻辑的选择:以树莓派 CM5 为核心重新设计了一块主板。
原版 N40L 没有 NVMe 插槽,只有 USB 2.0 接口,当年引以为傲的功耗表现在今天也乏善可陈。板载的 AMD Turion II 芯片性能极其有限,即便是如今的树莓派也能在各方面超越原装硬件,而且功耗更低。
CM5 与标准树莓派 5 完全一致,只是没有引出任何接口,需配合提供接口的外部配件使用。许多爱好者会直接搭配官方预制 I/O 板卡,但这位创客利用树莓派项目的开源特性,基于原始原理图与文档自行魔改了一版。
他把板卡尺寸扩展到与原 ProLiant N40L 的安装区域一致,并先 3D 打印了一个简易塑料模型,以确保接口与螺孔位置精确无误。随后进行了一系列优化:精简为单个 HDMI 接口,并增加了一组包含网口与两个 USB 3.0 Type-A 接口的连接器堆叠。
他还在 PCB 上布设了一个 NVMe 插槽用于系统盘,并花时间调整走线长度以确保全部等长,避免出现时序问题。虽然他没有加装 RGB 灯,但通过 PCBWay 的定制配置器选了黑底黄字的配色,为这块新主板增添了一点个性,同时还加入了 Boop 与 Reboop 开关。
拿到新打的 PCB 后,他进行了测试——一次点亮。把主板装进 N40L 机箱后,尺寸严丝合缝,顺利启动,并实测了 USB 与以太网连接速度以确保符合规格。略显遗憾的是,他尚未加入硬盘仓所需的 SFF-8087 接口,推测后续还有进一步改造计划。
本文来源:https://www.tomshardware.com/raspberry-pi/techie-makes-his-own-motherboard-to-refurbish-15-year-old-hp-proliant-n40l-tower-server-raspberry-pi-cm5-adds-nvme-and-usb-3-0
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Maker-built motherboard, using Raspberry Pi CM5 to revive a 15‑year‑old HP server.
Nobody likes discarding old hardware that still has many usable parts, and almost everyone loves a nice DIY electronics project. These two points perfectly combine in one maker—he built a motherboard to revive his aging HP ProLiant N40L micro server.
The machine's onboard motherboard and SoC are truly too old, so he made the logical choice: redesigning a motherboard with the Raspberry Pi CM5 at its core.
The original N40L lacks an NVMe slot, having only USB 2.0 ports; its once‑proud power consumption is now mediocre. The onboard AMD Turion II CPU is extremely limited—even today's Raspberry Pi outperforms the original hardware in every respect while using less power.
The CM5 is identical to the standard Raspberry Pi 5, except that it exposes no interfaces and must be used with an external accessory that provides them. Many hobbyists simply pair it with the official prefabricated I/O board, but this maker leveraged the open‑source nature of the Raspberry Pi project and, based on the original schematics and documentation, crafted his own modified version.
He expanded the board's dimensions to match the mounting area of the original ProLiant N40L, first 3D‑printing a simple plastic mock‑up to verify the exact placement of ports and screw holes. He then carried out a series of optimizations: reducing it to a single HDMI port and adding a stack of connectors that includes an Ethernet jack and two USB 3.0 Type‑A ports.
He also laid out an NVMe slot on the PCB for the system drive and spent time adjusting trace lengths to make them all equal, avoiding timing issues. Although he didn't add RGB lighting, he chose a black‑with‑yellow‑letter color scheme via PCBWay's configurator, giving the new board a touch of personality, and he also added Boop and Reboot switches.
After receiving the freshly fabricated PCB, he ran tests—first power‑on. Installing the board into the N40L chassis gave a perfect fit; it booted successfully, and he measured USB and Ethernet speeds to confirm they met specifications. The only shortcoming is that he hasn't yet added the SFF‑8087 connector needed for the drive bay, suggesting further revisions are planned.
