文石藏了个子品牌叫咪卡,首款M1是3.97寸墨水屏Onyx Has a Hidden Sub-brand Called Mika; Its First M1 Features a 3.97-Inch E-Ink Screen


AI free token/AI免费积分

本文来源:https://mp.weixin.qq.com/s/6RLjHybrR-Qxa1uJDq1I0Q
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

今年8月,我刷小红书时偶然看到一款3.97英寸的墨水屏电纸书。

当时我就感觉这款墨水屏电纸书的完成度相当高,不像是个人或小作坊拼凑出来的。

现在基本可以确定,这款设备就是文石推出的,而且大概率跟文石在海外推出的那款Boox Picco是同一款:IFA2026快报:文石Picco,3.97寸墨水屏,不到5mm,但放弃了Android

文石藏了个子品牌叫咪卡,首款M1是3.97寸墨水屏

毕竟各条线索的指向已经非常明确。

小红书上咪卡这个账号始终只展示一个角度:只晒正面,从不发背面。

为啥?

因为文石Picco背面的特征太显著了,发出来基本一下就能锁定:文石墨水屏新品3连发+One more thing

文石藏了个子品牌叫咪卡,首款M1是3.97寸墨水屏
PART 01
大厂为什么要推出子品牌

这恰好印证了我之前说过的那句话:大厂做这类小尺寸机型,很可能会另推一个子品牌。

这种小尺寸墨水屏产品的赚钱效率实在太低。

卖十几二十台赚到的利润,或许还不及卖一台6寸机型。

文石藏了个子品牌叫咪卡,首款M1是3.97寸墨水屏

为了不冲击其他产线机型的销量,用一个子品牌在前面挡一下更合理,做不好也能迅速切割。

毕竟在手机形态、便携形态这块,文石的主力依然是P6小白马系列。

PART 02
商标与核准信息都指向文石

过往我查新品会走多个渠道,但真正能用来判断发售时间的,基本就是3C认证。

通常拿到3C离发售就不远了,快则半个月,慢则一两个月。

咪卡目前还查不到3C认证,不过它的前置信息已经能查到了。

究竟怎么确定咪卡到底属于哪家公司?查商标。大品牌都会给旗下机型去注册商标。

文石藏了个子品牌叫咪卡,首款M1是3.97寸墨水屏

然后我去查了一下,咪卡的商标申请人就是广州文石信息科技股份有限公司,今年7月1号提交的,而且已经借助初审,板上钉钉的事情。

另外,设备带有WiFi或蓝牙模块的话,还需要去工信部申请无线电发射设备型号核准。

我查到咪卡M1的申请单位同样是广州文石信息科技股份有限公司,也已经批准了。

文石藏了个子品牌叫咪卡,首款M1是3.97寸墨水屏

所以这款设备该走的手续就差一个3C了,其它流程基本都走完了。

PART 03
咪卡M1完整软硬件参数

那么现在,我可以把文石咪卡M1的详细参数列在这里了,估计与最终规格大差不差。

显示屏:3.97英寸黑白电子纸,480×800,235PPI,冷暖双色前光

操作:实体按键+触控操作

处理器:ESP32

内存(RAM):SRAM 512 KB + PSRAM 8 MB

存储空间(ROM) :16 MB

连接与传输:WiFi+蓝牙;兼容借助App或网页传书,兼容Micro SD卡扩展(最大2TB)(首发的机器送一张16GB的SD卡)

电池续航与接口:920mAh电池,Type-C充电,兼容 OTG

规格:105.5×62×5.5mm,约58g

平台:封闭平台(基于Linux)

文石藏了个子品牌叫咪卡,首款M1是3.97寸墨水屏
PART 04
定价会落在哪

文石Picco海外版页面此前写的是11月底发货,如今这个信息已经不见,不知是否会提前发货。

实际上人们看到咪卡M1看到这个规格,大家最关心的肯定是定价。

如果是小作坊来做,卖300多也有可能,但文石这个品牌自带溢价。

再加上这款机型的外观做工,可能是我目前见过的同类产品里最精致的。

平台体验还没感受到,不好评价,但做工至少是大厂水准。

所以我认为国内定价可能就在500元上下。

盲猜一个:499元交个朋友?

最后,附上5篇深度专栏好文:

👉3条斩杀线,终结墨水屏设备“买了又买”的内耗

👉墨水屏新手别乱买!一次讲透基础常识,省下上千元试错成本

👉书没读几本,墨水屏买了一堆|戒掉心瘾的12条纪律

👉巨头围剿下,墨水屏创业仅剩的3条路

👉二手墨水屏避坑指南:3次翻车换来的7条教训

In August this year, I casually came across a 3.97-inch e-ink e-reader on Xiaohongshu.

I felt that this e-ink e-reader had quite a high level of polish, not resembling something pieced together by an individual or a small workshop.

It can now be basically confirmed that this device is being launched by Onyx, and it is highly likely the same model as the Onyx Boox Picco launched overseas: IFA2026 News: Onyx Picco, 3.97-inch E-ink, less than 5mm, but Android is dropped

Onyx Has a Hidden Sub-brand Called Mika; Its First M1 Features a 3.97-Inch E-Ink Screen

After all, the clues all point in a very clear direction.

On Xiaohongshu, the account Mica always displays only one angle: it only shows the front, never the back.

Why?

Because the features on the back of the Onyx Picco are so distinctive that posting it would basically identify it instantly: Onyx 3 new e-ink products + One more thing

Onyx Has a Hidden Sub-brand Called Mika; Its First M1 Features a 3.97-Inch E-Ink Screen

PART 01

Why does a major company launch a sub-brand?

This corroborates what I said before: major companies are likely to launch a sub-brand for this kind of small-sized model.

The profitability of this kind of small-size e-ink product is simply too low.

The profit earned from selling a dozen or twenty units is perhaps not even equal to the profit from selling one 6-inch model.

Onyx Has a Hidden Sub-brand Called Mika; Its First M1 Features a 3.97-Inch E-Ink Screen

In order not to impact the sales of other production line models, it is more reasonable to use a sub-brand to stand in front, and it can be quickly cut off if it doesn't work well.

After all, in terms of phone form factor and portability, Onyx's main force is still the P6 Xibaoma series.

PART 02

Both the trademark and approval information point to Onyx

In the past, I checked new products through multiple channels, but what can truly be used to judge the release time is basically just the 3C certification.

Usually, once you get the 3C, the launch is not far off, as fast as half a month, or a month or two at the slowest.

Mica's 3C certification cannot be found yet, but its preliminary information is already available.

How exactly to determine which company Mica belongs to? Check the trademark . Major brands register trademarks for their models.

Onyx Has a Hidden Sub-brand Called Mika; Its First M1 Features a 3.97-Inch E-Ink Screen

Then I checked, and the trademark applicant for Mica is Guangzhou Onyx Information Technology Co., Ltd., submitted on July 1st this year, and it has already passed the preliminary review, which is a sure thing.

In addition, if the device comes with a WiFi or Bluetooth module, it is also necessary to apply for the Radio Transmission Equipment Model Approval with the Ministry of Industry and Information Technology.

I found that the applicant for Mica M1 is also Guangzhou Onyx Information Technology Co., Ltd., and it has been approved.

Onyx Has a Hidden Sub-brand Called Mika; Its First M1 Features a 3.97-Inch E-Ink Screen

So this device is missing just one step of the 3C among the required procedures; the other processes are basically completed.

PART 03

Complete hardware and software parameters of Mica M1

Now, I can list the detailed parameters of the Onyx Mica M1 here, which I estimate are not much different from the final specs.

Display: 3.97-inch black and white e-paper, 480×800, 235 PPI, warm and cool dual-color front light

Operation: physical buttons + touch operation

Processor: ESP32

Memory (RAM): SRAM 512 KB + PSRAM 8 MB

Storage (ROM): 16 MB

Connectivity and transmission: WiFi + Bluetooth; supports book transfer via App or web, supports Micro SD card expansion (up to 2TB) (a 16GB SD card comes with the initial launch units)

Battery life and interfaces: 920mAh battery, Type-C charging, supports OTG

Dimensions: 105.5×62× 5.5mm, approx. 58g

Platform: Closed platform (based on Linux)

Onyx Has a Hidden Sub-brand Called Mika; Its First M1 Features a 3.97-Inch E-Ink Screen

PART 04

Where will the price fall

The overseas page for the Onyx Picco previously stated shipping by the end of November; this information is now gone, and it is unknown if shipping will be moved up.

Actually, when people see the Mica M1 specs, the thing they care about most is definitely the price.

If a small workshop were to do it, a price of over 300 is possible, but the Onyx brand comes with its own premium.

Plus, the build quality of this model might be the most exquisite among similar products I have seen so far.

I haven't experienced the platform experience yet, so it's hard to evaluate, but the build quality is at least at a major manufacturer level.

So I think the domestic price will be around 500 yuan.

A blind guess: 499 yuan to make friends?

Finally, here are 5 in-depth column articles:

👉 3 "Kill Lines" to End the Internal Consumption of "Buy Again After Buying" in E-ink Devices

👉 E-ink Beginners, Don't Buy Randomly! A Thorough Explanation of Basic Common Sense, Saving Thousands of Yuan in Trial and Error Costs

👉 Haven't Read Many Books, But Bought a Lot of E-ink Devices | 12 Rules to Break the Habit of Addiction

👉 Under the Siege of Giants, The Only 3 Paths Left for E-ink Startups

👉 Second-hand E-ink Pitfall Avoidance Guide: 7 Lessons Learned from 3 Failures

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry