本文来源:https://mp.weixin.qq.com/s/dUpNUsXRtdI5F_yThiE7-Q
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
今年SNEC光伏展上,京东方摆出了一件不太起眼的小玩意:悬挂式电子价签,不用电池、不用插电,靠商场吊灯的光就能一直亮着。旁边的晶皓新能源展了一把智能门锁,宣传语写得相当直白——「微光永续电池续航」,翻译成大白话就是:装上之后,这辈子可能都不用再给它换电池。
这事乍听像个玩具,可放进钙钛矿这个大盘子里看,它是被行业机构正式点名的「先行情形」。IIM信息在《2026年全球钙钛矿电池行业前景洞察报告》里给了个数字:2026年全球钙钛矿需求预计1.5到2.0GW,同比上涨140%到180%。室内弱光供电与BIPV(也就是把光伏做进建筑外立面、幕墙这类构件)、无人机、车载等情形并列,成为六大先行情形之一。
这个增速到底有没有水分?室内弱光凭什么挤进第一梯队?规模化的坎又在哪里?咱们一条条来说。
一、140%-180%这个数字,我先算笔账

先说实话,这个增速看着唬人,但把绝对量摆出来就没那么吓人了。1.5到2.0GW,放到光伏这个行业里算什么量级?晶硅光伏一年装机是几百GW的规模,钙钛矿这点需求连零头都算不上。
智研咨询2026年2月发布的报告给了另一组数字:2025年中国钙钛矿市面规模37.5亿元,2026年预计突破100亿元。这个增速算下来在166%到184%之间,跟IIM那个140%-180%的口径基本对得上,两边数据互相印证了方向。
但往前翻一年,2024年市面规模才13.2亿元。也就是说,这个「激增」的起点特别低。基数小,稍微多几张订单,增速数字就能飙起来。真正撑起这个增速的,并不是终端市面突然爆单,而是供给侧的产能在2025年集中上量。协鑫光电、仁烁光能这些企业的GW级产线陆续落地,供给能力发生了质变,这才把2026年的需求预测往上拉。
这个增速是真的,但它衡量的是相对速度,不是绝对规模。100亿元听起来不小,可摆在光伏整个产值盘子里,依旧是个很小的角落。
二、室内弱光凭什么单独列一个情形

这才是我觉得最值得琢磨的地方。IIM的六大先行情形里,BIPV加柔性合计占了55%到62%,体量最大。室内弱光供电占比不高,却被单独点名列出,这说明它的战略信号意义大于规模意义。
为什么弱光行?这事有科学依据,不是营销话术。晶硅电池是为室外太阳光光谱优化的,波长范围宽、光强也大。而室内LED灯的光谱和强度完全是另一种情况:光弱、波段窄,晶硅在这种环境下响应差,转换效率掉得厉害。钙钛矿材料有个特性叫带隙可调,通过调整材料配比,能让吸光范围更贴近室内光源的波长分布。翻成人话就是,钙钛矿能「挑食」,专门去吃室内那点弱光,而且吃得比晶硅更干净。
SNEC 2026的展台就是证据。京东方的电子价签、晶皓新能源跟公牛合作的智能门锁、无锡众能光储的折叠充电包系列、天交新能源覆盖智能夜灯到电子纸桌牌的机型矩阵——这些企业在2026年6月集中把弱光机型端出来,说明行业关注点已经从「谁效率高」转向「谁能落地」。
还有个现实原因:弱光供电对稳定性和大面积均匀性的要求,比BIPV和电站级应用低得多。你想,一个电子价签用的钙钛矿膜片才多大面积,跟动辄几十平米的建筑幕墙没法比。均匀性做不好,顶多是价签亮度不均,不会像电站那样牵扯几十年的投资回报模型。钙钛矿现在户外25年寿命和GW级良率这两个核心指标还没被完全验证,那些验证门槛低的情形,自然先摘到果子。
三、卡脖子的不只是电池,还有那块管电的芯片

钙钛矿发电只是这件事的一半。宁波米德方格这家做电源管理芯片的公司,在SNEC上讲得很直接:钙钛矿负责发电,芯片负责管电,两个都得跟上。

这话不是场面话。室内弱光的启动门槛格外低,以米德方格的MF9005这款PMIC(电源管理集成电路,你可以理解成给微弱电流做交通指挥的芯片)为例,380mV电压、3.7微瓦的功率就能启动。这是什么概念?普通室内灯光、阴天条件下产生的电流,量级就是这么小。光把电「发」出来还不够,还得把这点电收集起来、升压、存进电池或者超级电容,整个流程走通才能让设备真正做到一次贴装、永久电池续航。
这就意味着,室内弱光这条赛道的产业链完整度,不只看钙钛矿组件厂商做得怎么样,还得看电源管理芯片、储能单元这些配套环节能不能同步跟上。米德方格这类芯片公司愿意专门为钙钛矿弱光情形做机型,本身就是个信号:上下游都在往这个方向靠。
那钙钛矿组件本身还差什么?差的不是效率绝对值,弱光情形本来就不追求20%以上的高质率。差的是一致性和寿命验证。H33研报里提到一句话,我觉得说得挺到位:当下公开信息里,还没有企业宣称量产的弱光钙钛矿组件完成了IEC全项稳定性认证。钙钛矿材料本身没难题,验证流程还没走完,情形规模化复制之前必须补上这一课。
四、这是救命稻草,还是练兵场

我的判断是,室内弱光供电现在更像是个练兵场,不是什么救命稻草。

H33研报对2026年中国钙钛矿的定位挺清楚:工艺就绪度领先于制造就绪度。翻成人话,就是实验室里的效率数字已经很漂亮了,光因科技2026年1月认证的单结效率做到27.87%,协鑫光电6月做的2042平方厘米叠层组件效率破了30%,南京航空航天大学更早之前(2024年)做出过等效25年寿命的实验室数据。这些都是真本事。但从实验室搬到量产线上,大面积均匀性、良率这些工程难题还没完全应对,H33的另一份报告里提到,当电池面积从0.1平方厘米放大到1000平方厘米以上,效率通常会掉3到5个百分点。
弱光情形门槛低、风险小,拿来练手正合适。一个智能门锁用的钙钛矿膜片出了点小难题,顶多换一片,不会像电站那样牵扯巨额投资。用这类小情形先把量产一致性跑顺了,反过来再去啃BIPV、集中式电站这些高价值情形的硬骨头,这个顺序我觉得是合理的。
别把140%-180%这个增速读成「钙钛矿要爆发了」。就算这个数字精准兑现,1.5到2.0GW放在整个光伏产业里还是零头,室内弱光又是零头里的零头。真正值得盯的信号,是IIM报告里提到的IEC稳定性标准草案,现在已经进入投票阶段。这套标准一旦在2026到2027年落地,弱光和BIPV这些情形才第一次有了权威的寿命和衰减评价基准,到那时候才能真正判断这条路是从「先行示范」走向「规模复制」,还是继续留在展会的展台上。
眼下我更愿意把它看作一个积极信号:材料的科学逻辑站得住,产业链上下游也开始主动配合,该补的功课清清楚楚地摆在那儿。剩下就看谁能先把认证这一关跑完。你要是正在做相关机型或投资判断,不妨盯紧这个标准落地的时间点,比盯那个140%-180%的增速数字更有用。
At this year's SNEC Photovoltaic Exhibition, BOE showcased a seemingly humble device: a hanging electronic price tag that runs without batteries or electricity, powered solely by the ambient light from the mall's ceiling lights. Meanwhile, nearby, Jinghao New Energy displayed a smart door lock with a distinct label — "Micro-light Perpetual Battery Life" — which essentially promises that once installed, you'll never need to replace the battery again.
While this may sound like a gimmicky toy, placing it within the broader context of perovskite technology reveals its significance. The industry authority, IIM, explicitly identified this as a "pioneering application" in its 2026 Global Perovskite Battery Industry Forecast Report. The report predicts that by 2026, the global demand for perovskite batteries will reach between 1.5 GW and 2.0 GW — a massive 140% to 180% increase year-over-year. Indoor weak-light power supply, alongside BIPV (Building-Integrated Photovoltaics), drones, and车载 applications, ranks as one of the six most promising sectors.
But is this growth rate realistic? How did indoor weak-light power supply rise to the front rank, and what obstacles lie on the path to large-scale production? Let's unpack these questions one by one.
Part I: Breaking Down the 140–180% Growth Rate
To be blunt, this growth percentage is impressive but not necessarily indicative of market saturation. A scale of 1.5 to 2.0 GW is quite small compared to the silicon solar industry, which sees hundreds of GW installed annually. The reported growth is largely due to the industry starting from a low base; small fluctuations in orders can result in large percentage changes.
Looking at the data from Zhiyan Consulting, the Chinese perovskite market was valued at 3.75 billion yuan in 2025 and is expected to hit 10 billion yuan by 2026 — a growth of 166–240%, which aligns with the IIM figures. However, tracing back to 2024, the market was only at 1.32 billion yuan. This suggests that the "surge" is driven by the timing of new production lines coming online (from companies like GCL and Renshuguang) rather than an immediate explosion in consumer demand for the devices themselves.
Part II: The Strategic Importance of Indoor Weak-Light Power
What's truly fascinating is the inclusion of indoor weak-light power as a distinct category. While BIPV dominates with 55–62% of the forecasted market, indoor applications are given equal attention, suggesting they hold strategic importance beyond their immediate market size.
The reason for this prominence lies in the fundamental physics of the material. Silicon solar cells are optimized for the broad, high-intensity spectrum of outdoor sunlight. In contrast, indoor environments are characterized by narrow, low-intensity LED light. Perovskites excel here because their band gap is tunable; by adjusting the composition, manufacturers can create cells that absorb this specific "indoor" spectrum much more efficiently than silicon.
The exhibits at SNEC 2026 (including BOE's price tags, Jinghao's locks, and Wuxi Zhongneng's charging packs) demonstrate that the industry is transitioning from theoretical efficiency to practical, deployable solutions. These small, low-power devices serve as ideal test beds for the technology because they are less sensitive to the minor defects or inconsistencies that exist in the current manufacturing processes.
Part III: The Bottleneck — Not Just the Battery, But the Chip
The conversation around perovskite often focuses solely on the cell itself, but as Ningbo Mid-Square (a manufacturer of power management ICs) pointed out at the conference, the ecosystem depends on the electronics as much as the photovoltaics.
Indoor weak-light harvesting requires a specific type of power management chip (PMIC) capable of waking up and operating on extremely low currents — in the range of 380 mV and 3.7 μW. Without these specialized low-threshold chips, the tiny amounts of electricity generated by the perovskite cells under weak light would go uncollected. The availability of these chips (like the Mid-Square MF9005) is a critical enabler for making "battery-less" devices a reality.
The remaining bottleneck for the perovskite components themselves is not necessarily the efficiency (which is already high), but the consistency and longevity. Currently, no manufacturer has publicly claimed that their production-grade weak-light cells have passed the full IEC stability certification. Until these environmental stress tests are completed, the "perpetual battery" promise remains a hypothesis rather than a guarantee.
Part IV: A Training Ground, Not a Savior
In my analysis, indoor weak-light power supply should be viewed as a "training ground" for the industry rather than a market that will save the bottom line.
The H33 report aptly notes that the industry's "process readiness" is ahead of its "manufacturing readiness." While labs are achieving amazing efficiencies (up to 27.87% for single junctions), translating those results to large, uniform panels is a different story. Indoor applications are ideal for this learning phase because the stakes are lower. If a cell fails in a door lock, it is a nuisance; if it fails on a skyscraper, it is a liability.
Furthermore, while the 2026 forecast is positive, the absolute volume (2 GW) is small enough that it does not represent a significant shift in the global energy landscape. The real "signal" to watch is the standardization process. The IEC stability standard for BIPV and similar applications is currently in the voting stage. Once this standard is established (likely between 2026 and 2027), it will provide a universal metric to compare the true lifetime and reliability of these cells, determining whether they are ready for widespread use beyond niche gadgets.
Conclusion
The future of perovskite power supply looks promising, but it is unfolding in a specific sequence. The industry is starting with low-risk, low-area applications like indoor sensors and door locks to perfect the production line. As the technology matures and the necessary support chips become more sophisticated, it will naturally expand into the high-value, high-volume markets of BIPV and grid-scale power. The 140% growth rate is a valid statistic, but it measures the speed of the race's first lap, not the finishing time.
The H33 research report has a clear positioning for Chinese perovskites in 2026: process readiness is ahead of manufacturing readiness. In plain language, the lab efficiency figures already look very good—Guangyin Technology's certified single-junction efficiency reached 27.87% in January 2026, GCL Optoelectronics' 2042-square-centimeter tandem module broke 30% in June, and Nanjing University of Aeronautics and Astronautics produced lab data equivalent to a 25-year lifetime earlier (in 2024). These are real capabilities. But moving from the lab to the mass-production line, engineering challenges such as large-area uniformity and yield have not been fully addressed; another H33 report notes that when cell area scales from 0.1 square centimeter to more than 1000 square centimeters, efficiency typically drops by 3 to 5 percentage points.
Low-light scenarios have low barriers and small risks, making them suitable for getting practice. If a perovskite film used in a smart door lock has a minor issue, you replace one piece at most; it won't involve the huge investments that a power station does. Using such small scenarios to first get mass-production consistency running smoothly, and then turning to tackle the tough challenges of high-value scenarios like BIPV and centralized power stations—I think this sequence makes sense.
Don't read the 140%-180% growth rate as "perovskite is about to explode." Even if that figure is delivered precisely, 1.5 to 2.0 GW is still a drop in the bucket of the entire photovoltaic industry, and indoor low-light is a drop within that drop. The signal really worth watching is the IEC stability standards draft mentioned in the IIM report, which has now entered the voting stage. Once this set of standards is finalized in 2026 to 2027, low-light and BIPV scenarios will for the first time have authoritative benchmarks for lifetime and degradation assessment; only then can we truly judge whether this path moves from "pilot demonstration" to "scalable replication," or remains on exhibition booth stands.
For now, I'd rather see it as a positive signal: the scientific logic of the material holds up, upstream and downstream players in the industry chain are starting to actively cooperate, and the homework that needs to be done is clearly laid out. What remains is who can first get through the certification hurdle. If you are making related product model or investment decisions, you'd better keep a close eye on the timing of this standard's finalization—it's more useful than watching that 140%-180% growth figure.