在3D打印领域,最具争议性的问题之一莫过于支撑结构,一方面因为它们时刻提醒着我们重力对打印件的影响,另一方面“存在某种唯一正确方式”这种想法本身就容易引发激烈讨论。话虽如此,[Matthew Trahan]认为常规网格支撑和有机树状支撑都不是答案,更好的解决方案在于鳍状支撑。
现有支撑方案的问题,尤其是在FDM打印中,在于它们会浪费大量材料,并且会在打印件表面留下难以去除的痕迹,需要后期处理。而鳍状支撑的设计理念则是尽可能减少材料用量,并且能尽可能干净利落地折断移除。该工具在Claude的协助下开发,既可以在本地运行,也可以通过printfins.com访问。
目前的思路是将这些鳍状支撑直接融入STL模型,因此是一次性操作,但未来可能会作为切片器插件提供。这一基本概念由[Slant3D]提出,下方视频中对其表示了致谢,不过他们的做法是使用CAD软件手动添加鳍状支撑。
鳍状结构用于提供支撑基底,同时可以添加小尖齿来强化与模型的连接。当然,这也会使其更难折断移除,并且留下更少的痕迹。可以想象,通过添加空隙,这些鳍状支撑还能做得更轻量化,但那可能会增加打印时间。
Perhaps one of the most contentious issues in 3D printing is that of supports, both because they’re an uncomfortable reminder of how gravity affects our prints and because the very idea of there being ‘one right way’ is bound to get you into some spirited discussions. That said, [Matthew Trahan] figured that neither regular grid supports nor organic tree supports are the answer here, and that the better answer is found in fins.
The problem with existing support approaches especially with FDM prints is that they can be fairly wasteful in terms of material, and they can leave serious marks on the printed object’s surface that require post-processing. These fins on the other hand are designed to require as little material as possible and snap off as cleanly as possible. The tool, developed with the assistance of Claude, can either run locally or be accessed via printfins.com.
Currently the idea is that these fins are baked directly into the STL model so that it’s a one-time thing, but it may eventually become available as a slicer plugin. The basic concept was pitched by [Slant3D], who gets credited in the video below, although in their approach they used CAD software to add the fin supports manually.
The fins are there to provide the support base, while small tines can be added to reinforce the connection to the model. These do make it it less easy to snap off with minimal scarring, of course. Conceivably these fins could be made even more light-weight by adding gaps, but that probably would add to the print time.
本文来源:https://hackaday.com/2026/09/23/forget-trees-add-fins-to-your-3d-prints-instead/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。