ESP32 显示板上的音频频谱分析仪An Audio Spectrum Analyser on an ESP32 Display Board


AI free token/AI免费积分
ESP32 显示板上的音频频谱分析仪

ESP32 显示板上的音频频谱分析仪

一台外观精致的频谱分析仪过去很难被纳入 DIY 项目,但正如 [Mirko “mircemk” Pavleski] 所展示的那样,像 ESP32 这样的现代微控制器仅凭一块显示面板和一些无源元件就能完成这项任务。

这个具体示例基于 CrowPanel 3.5 构建,它将功能强大的微控制器与 480×320 触摸屏 LCD 结合在一起。但 CrowPanel 本身并没有特别之处,你完全可以用零件箱里随手可得的任何显示屏实现类似效果——尽管可能需要修改一些代码以适应不同的硬件。

除了微控制器和显示屏之外,要重现 [mircemk] 在这里完成的工作,你只需要一些无源元件来调理输入的模拟音频信号,使其能够送入 MCU 上的一个模数转换器(ADC)引脚。

这个项目相当简单,但如果你想看看 [mircemk] 更具挑战性的作品,也不必担心。更大胆的业余玩家不妨尝试复刻这台由旧电视真空管制成的高压 X 光机。

本文来源:https://hackaday.com/2026/09/23/audio-spectrum-analyzer-on-an-esp32-display-board/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

An audio spectrum analyser on an ESP32 display board

A beautifully compact spectrum analyser was long a hard sell for DIY projects, but as Mirko 'mircemk' Pavleski demonstrates, a modern microcontroller like the ESP32 can do the job with nothing more than a display panel and some passive components.

This particular example is built on the CrowPanel 3.5, which pairs a capable microcontroller with a 480×320 touchscreen LCD. But there is nothing special about the CrowPanel itself — you could achieve something similar with whatever display you happen to have in your parts bin, though you may need to adjust some code for different hardware.

Beyond the microcontroller and the display, all you need to reproduce what mircemk does here is a handful of passive components to condition the incoming analogue audio signal so it can be fed into an ADC pin on the MCU.

This project is quite simple, but if you want to see something more challenging from mircemk, worry not. The more ambitious hobbyist might try recreating his high-voltage X-ray machine built from an old television vacuum tube.

An Audio Spectrum Analyser on an ESP32 Display Board

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry