理想汽车 CEO 李想亲自回应新款 i6 延期原因:10 月底才有车辆合格证,在此之前连临牌都上不了Li Auto CEO Li Xiang personally responds to reason for new i6 delay: vehicle certificate of conformity only available at end of October, before which even temporary plates cannot be obtained


AI free token/AI免费积分
感谢IT之家网友 ihopeful 的线索投递!

IT之家 9 月 24 日消息,理想汽车机型线负责人李昕旸昨日表示,2026 款理想 i6 汽车上市时间将延期至 10 月底发布,启动交付的时间仍然为 11 月初,保持不变。

理想汽车 CEO 李想亲自回应新款 i6 延期原因:10 月底才有车辆合格证,在此之前连临牌都上不了

理想汽车 CEO 李想今日在公众号平台亲自回应了新款 i6 延期的原因,主要原因是该车 9 月初上的工信部目录,大概 10 月底才有车辆合格证(有合格证才可以上牌照,哪怕是临牌)。

理想汽车 CEO 李想亲自回应新款 i6 延期原因:10 月底才有车辆合格证,在此之前连临牌都上不了

没有合格证,车子到了店面也不能上路试驾。销量最大的车的年度款,不能上路试驾,不能感受最关键更新的马赫芯片和马赫 VLA2.5,没有办法给使用者展示 i6 的真正价值。希望人们可以理解。

据IT之家此前报道,2026 款理想 i6 已完成申报,新车搭载理想自研 5C 电池和自研马赫芯片。

2026 款理想 i6 外形尺寸为长 4950 mm、宽 1935 mm、高 1655 mm,轴距达到 3000 mm;有单电机和双电机四驱两个版本,其中单电机版电机最大功率 250 千瓦,双电机版前后电机功率分别为 150 千瓦和 250 千瓦。

理想汽车 CEO 李想亲自回应新款 i6 延期原因:10 月底才有车辆合格证,在此之前连临牌都上不了

外观层面,该车延续理想 i6 外观语言,不过新车换装了半隐藏式门把手;另外,新车可选装侧激光雷达 / 后激光雷达。

本文来源:https://www.ithome.com/1/006/823.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Thanks to IT Home netizen ihopeful for the tip!

On September 24, IT Home reported that Li Xinyan, head of the vehicle model line at Li Auto, stated yesterday that the launch date of the 2026 Li Auto i6 will be postponed to late October. The delivery start time remains unchanged and is still scheduled for early November.

Li Auto CEO Li Xiang personally responds to reason for new i6 delay: vehicle certificate of conformity only available at end of October, before which even temporary plates cannot be obtained

Li Auto CEO Li Xiang personally responded to the reasons for the new i6's delay on his official WeChat account today. The main reason is that the vehicle was only listed in the Ministry of Industry and Information Technology catalog in early September, meaning the vehicle certification will likely not be available until late October (a certification is required to register a license plate, even a temporary one).

Li Auto CEO Li Xiang personally responds to reason for new i6 delay: vehicle certificate of conformity only available at end of October, before which even temporary plates cannot be obtained

Without the certification, cars arriving at dealerships cannot be road-tested for trial drives. As the annual update of the best-selling model, being unable to conduct test drives means customers cannot experience the most critical updates, namely the Machin chip and Machin VLA2.5. There is no way to demonstrate the true value of the i6 to users. We hope people can understand this.

According to previous IT Home reports, the 2026 Li Auto i6 has completed its declaration. The new vehicle is equipped with Li Auto's self-developed 5C battery and self-developed Machin chip.

The 2026 Li Auto i6 has external dimensions of 4950 mm in length, 1935 mm in width, and 1655 mm in height, with a wheelbase of 3000 mm. It offers two versions: single-motor and dual-motor four-wheel drive. The single-motor version has a maximum motor power output of 250 kW, while the dual-motor version has front and rear motor power outputs of 150 kW and 250 kW, respectively.

Li Auto CEO Li Xiang personally responds to reason for new i6 delay: vehicle certificate of conformity only available at end of October, before which even temporary plates cannot be obtained

In terms of appearance, the vehicle continues the Li Auto i6 design language. However, the new car features semi-concealed door handles; additionally, side LiDAR / rear LiDAR are available as optional equipment.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry