
据 Hackaday 报道,开发者 Daniel Vučinović 推出了名为 Pajoniiir 的开源项目,用一块 ESP32-P4 微控制器取代 DJ 台上的笔记本电脑。项目代码已在 GitHub 开源。
整套系统采用 Guition 的现成组合:ESP32-P4 微控制器搭配 4.3 英寸触摸屏。ESP32 的两个 USB 接口分别连接 Pioneer DDJ-FLX4 打碟控制器和一个存有 Rekordbox 音乐库的 U 盘,音频输出则通过 PCM5102A DAC 模块实现。
这块微控制器可以读取并播放 MP3、WAV 和 FLAC 格式的曲目,响应打碟控制器的指令,并在触摸屏上显示波形与各类控制界面,几乎包办了笔记本电脑在 DJ 台上的全部工作——而成本只有约 50 美元,也不用担心演出前十分钟被 Windows 更新卡在重启界面。
本文来源:https://hackaday.com/2026/09/24/standalone-dj-system-runs-on-esp32/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
According to a Hackaday report, developer Daniel Vučinović has launched an open-source project called Pajoniiir, which uses an ESP32-P4 microcontroller to replace the laptop on a DJ booth. The project’s code is already open-sourced on GitHub.
The entire system uses a ready-made combination from Guition: an ESP32-P4 microcontroller paired with a 4.3-inch touchscreen. The two USB ports on the ESP32 are connected respectively to a Pioneer DDJ-FLX4 DJ controller and a USB flash drive containing a Rekordbox music library, while audio output is implemented through a PCM5102A DAC module.
This microcontroller can read and play tracks in MP3, WAV, and FLAC formats, respond to commands from the DJ controller, and display waveforms and various control interfaces on the touchscreen, essentially taking over all of a laptop’s work at a DJ table — and it costs only about 50 US dollars, with no need to worry about being stuck on a reboot screen due to a Windows update ten minutes before a performance.
