用 3.5mm 音频插座做模块化宏键盘:suutari20 开源方案Using a 3.5mm audio jack to build a modular macro keyboard: suutari20 open-source solution


AI free token/AI免费积分
用 3.5mm 音频插座做模块化宏键盘:suutari20 开源方案

据 Hackaday 报道,自制键盘因 ATmega32U4 等带 USB 控制的微控制器而变得简单,但作者 Squalius 设计的 suutari20 把「模块化」推上新台阶:整个宏键盘不使用专用连接器,而是采用音频设备常见的 3.5 mm 插孔。

每个 3.5 mm 插座可挂接最多 3 个按键/控件,一个 hub 最多支持 18 键,并且兼容旋钮、 jog 控制器等模拟输入——想换布局时像拔耳机线一样换模块即可。主控使用树莓派 Pico 上的 RP2040,固件采用 QMK,熟悉客制化键盘的用户可无缝上手。外壳用 3D 打印完成,整体成本极低。

项目文件已在 GitHub 开源(Squalius-cephalus/suutari20)。相比此前每个按键自带一颗微控制器的极端模块化方案,suutari20 在保持简单与低成本的同时实现了高度灵活的自定义布局。

本文来源:https://hackaday.com/2026-09-26/a-modular-macro-keypad/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

According to Hackaday, DIY keyboards have become easy thanks to microcontrollers with USB support like the ATmega32U4, but author Squalius's suutari20 takes "modularity" to a new level: the entire macro keyboard uses no dedicated connectors, instead employing 3.5 mm jacks commonly found in audio equipment.

Each 3.5 mm socket can connect up to 3 keys/controls, one hub supports up to 18 keys, and it is compatible with analog inputs such as knobs and jog controllers—when you want to change the layout, just swap modules like unplugging headphone cables. The main controller uses the RP2040 on a Raspberry Pi Pico, and the firmware runs QMK, so users familiar with custom keyboards can get started seamlessly. The case is 3D printed, keeping the overall cost extremely low.

The project files have been open-sourced on GitHub (Squalius-cephalus/suutari20). Compared to earlier extreme modular approaches where each key carried its own microcontroller, suutari20 achieves highly flexible custom layouts while maintaining simplicity and low cost.

Using a 3.5mm audio jack to build a modular macro keyboard: suutari20 open-source solution

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry