
据 Hackaday 报道,翻转点阵(flip dot)显示屏本身就足够酷炫,而 maker 圈知名作者 mitxela 在 EMF 2026 电子艺术节上展出的「翻转点阵流体模拟」装置让更多人见识了它的魅力。华丽效果的另一面,是难以想象的工程量。
mitxela 不仅要搜集大量翻转点阵模块,还得找到一套不至于「得不偿失」的驱动方案。 surplus 翻转点阵的一切几乎都是麻烦——从电气要求到安装固定。哪怕是他优化过的方案——给每块点阵定制背包式驱动板再焊回原有 PCB——也意味着惊人的焊接量。这个项目酝酿已久,工作强度从未降低。
回报则是 exquisite 的:视频里流体在黑白点阵上翻涌,伴随物理翻转的细碎沙沙声异常治愈。现场装置还配了一个「重力控制」摇杆,观众可以交互改变「重力」方向;mitxela 另外内置了加速度计,让显示内容随装置被搬动而物理响应。
翻转点阵原理可参考 Hackaday 此前的深度解析:每个圆片双面异色,电磁脉冲驱动翻转,与电子纸类似都属于「双稳态」显示——断电保持画面,仅翻转瞬间耗电。
本文来源:https://hackaday.com/2026-09-27/enormous-fluid-simulation-on-flip-dots-is-also-enormous-amount-of-work/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
According to Hackaday, flip dot displays are cool enough on their own, and the “flip dot fluid simulation” installation exhibited at the EMF 2026 electronic art festival by mitxela, a well-known author in the maker community, has let more people experience its charm. Behind the gorgeous visual effect is an unimaginable amount of engineering work.
mitxela not only had to collect a large number of flip dot modules, but also had to find a driving scheme that would not be “more trouble than it was worth.” Nearly everything about surplus flip dots is troublesome—from the electrical requirements to mounting and securing. Even his optimized solution—custom backpack-style driver boards for each flip dot matrix soldered back onto the original PCB—meant an astonishing amount of soldering. This project had been brewing for a long time, and the work intensity never dropped.
The payoff is exquisite: in the video, fluid churns across the black-and-white flip dot matrix, accompanied by the fine rustling hiss of the physical flips, which is exceptionally soothing. The live installation also included a “gravity control” joystick, allowing audiences to interactively change the direction of “gravity”; mitxela additionally built in an accelerometer so that the displayed content physically responded as the installation was moved.
The working principle of flip dots can be found in Hackaday’s previous in-depth analysis: each disc has two differently colored faces and is flipped by electromagnetic pulses; like electronic paper, it belongs to “bistable” displays—the image is retained when powered off, with power consumed only at the instant of flipping.
