用一个红外发射器项目入门:从原理到成品的完整指南Getting Started with an Infrared Transmitter Project: A Complete Guide from Principles to Finished Product


AI free token/AI免费积分
用一个红外发射器项目入门:从原理到成品的完整指南

据 Hackaday 报道,近期一位 Maker 分享了如何用一颗廉价的红外发射二极管、一个 Arduino Nano 和几行代码,搭出一台「万能红外遥控器」的完整项目,从原理到成品一应俱全。

红外遥控的工作原理并不复杂:发送端将按键指令编码成一串红外脉冲,接收端解码后执行对应命令。市售遥控器大多封装了这一过程,而自制方案的优势在于可编程——用户可以自行录制新设备的遥控码、合并多个设备的协议、甚至通过手机端 App 远程触发家电。

该项目使用 Arduino Nano 作为主控,搭配 TPIC6B595 移位寄存器驱动多个红外 LED,使发射距离从通常的 5–8 米提升到 15 米以上。软件层面则采用 IRremote 库进行 NEC、Samsung、RC5 等主流协议的编码与解码。制作者在视频中展示了如何抓取一台老式空调的遥控信号并重新编码发送到目标设备。

报道认为,这类「小项目大用途」的作品是创客社区最典型的产出形态:硬件成本不到 15 美元,学习曲线平缓,却能让读者在几天内理解嵌入式系统、信号处理和开源硬件开发的基本流程,非常适合作为新手入门的第一个实际项目。

本文来源:https://hackaday.com/2026/09/28/an-ir-blaster-project-in-a-nutshell/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

According to Hackaday, a Maker recently shared a complete project on how to build a "universal infrared remote control" using a cheap infrared emitting diode, an Arduino Nano, and a few lines of code, covering everything from principles to the finished product.

The working principle of infrared remote control is not complicated: the transmitter encodes the key command into a series of infrared pulses, and the receiver decodes them and executes the corresponding command. Most commercially available remotes encapsulate this process, while the advantage of a DIY solution is programmability—users can record remote codes for new devices, merge protocols from multiple devices, and even trigger home appliances remotely via a mobile app.

The project uses an Arduino Nano as the main controller, paired with a TPIC6B595 shift register to drive multiple infrared LEDs, increasing the transmission range from the typical 5–8 meters to over 15 meters. On the software side, it uses the IRremote library for encoding and decoding mainstream protocols such as NEC, Samsung, and RC5. The maker demonstrated in a video how to capture the remote signal of an old air conditioner and re-encode it for transmission to the target device.

The report believes that such "small project, big use" works are the most typical output form of the maker community: the hardware cost is less than $15, the learning curve is gentle, and it allows readers to understand the basic processes of embedded systems, signal processing, and open-source hardware development within a few days, making it very suitable as a first practical project for beginners.

Getting Started with an Infrared Transmitter Project: A Complete Guide from Principles to Finished Product

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry