IT之家 9 月 28 日消息,汉莎航空近日宣布为旗下部分空客 A330-300 型客机安装 AeroSHARK“鲨鱼皮”涂层,使飞机可以像鲨鱼游泳般高质飞行。
据介绍,客机的铝合金机身虽然看起来格外光滑,但细看表面时可以发现,上面充满许多粗糙孔洞。当飞机以 480 节(IT之家注:890km/h)速度飞行时,表面始终会附着一层薄薄的空气,存在厚度约 1mm 的黏性底层,其中充满大量涡流产生表面摩擦阻力,约占飞机总气动阻力的 50%。
作为比较,鲨鱼皮肤同样格外粗糙,相信被鲨鱼擦伤过的人都知道。
鲨鱼皮内微小的齿状鳞片被学者称为“真皮齿突”,也就是一种类似牙齿的鳞片,其表面带有微观凸起的平行脊状结构。当水流过鲨鱼身体时,会形成微小涡流。而在鲨鱼身上,这些脊状结构可以将涡流保持在远离皮肤的位置,从而抑制湍流,让鲨鱼可以快速而平稳地游动。
AeroSHARK 涂层模仿了鲨鱼的生物结构。该工艺使用人工聚合物制造,表面压制有间距为 50 微米的凹槽,模仿出鲨鱼皮齿突的几何形状、高度和间距。
官方宣称,这种工艺可以让飞机飞行时的燃油消耗和碳排放降低约 1%;如果机翼和尾翼也使用这种涂层,降幅最高可达 2%。
本文来源:https://www.ithome.com/1/008/018.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT Home news on September 28: Lufthansa recently announced that it will install the AeroSHARK "shark skin" coating on some of its Airbus A330-300 airliners, enabling the aircraft to fly with high quality like a shark swimming.
According to the introduction, although the aluminum alloy fuselage of the airliner looks extremely smooth, a closer look at the surface reveals that it is full of many rough pores. When the aircraft flies at 480 knots (IT Home note: 890 km/h), a thin layer of air always adheres to the surface, with a viscous sublayer about 1 mm thick, which is filled with numerous vortices that generate skin friction drag, accounting for about 50% of the aircraft's total aerodynamic drag.
By comparison, shark skin is also extremely rough, as anyone who has been grazed by a shark would know.
The tiny tooth-like scales on shark skin are called "dermal denticles" by scholars, that is, tooth-like scales with microscopic protruding parallel ridge structures on their surface. When water flows over a shark's body, tiny vortices form. On the shark, these ridge structures keep the vortices away from the skin, thereby suppressing turbulence and allowing the shark to swim quickly and smoothly.
The AeroSHARK coating mimics the biological structure of shark skin. This process is made of synthetic polymer, with grooves spaced 50 micrometers apart pressed onto the surface, mimicking the geometry, height, and spacing of shark skin denticles.
The official claims that this process can reduce fuel consumption and carbon emissions during flight by about 1%; if the wings and tail also use this coating, the reduction can reach up to 2%.
