开源合成孔径雷达无人机升级:实现干涉测量成像与高程图输出Open-Source Synthetic Aperture Radar UAV Upgrade: Enables Interferometric Imaging and Elevation Map Output


AI free token/AI免费积分
开源合成孔径雷达无人机升级:实现干涉测量成像与高程图输出

Hackaday 报道,创客 Henrik Forstén 在其合成孔径雷达(SAR)成像无人机首代方案问世一年多后,完成了大幅升级:不仅开发出更强大的 autofocus 算法来净化雷达图像,还扩展软件实现了高分辨率干涉测量成像。

原始雷达系统的主要瓶颈是 GPS,分辨率仅约 1 米;此前的清晰度提升很大程度上依赖对无人机位置的更精准估计。一条更简单但更贵的路径是加装 RTK(实时动态)GPS 接收机——借助固定地面站持续发送校正信号,精度可达几厘米。由于无人机并不需要实时定位,Forstén 选择使用 PPK(后处理动态)定位:飞行结束后将记录的 GPS 信号与基站数据对比,同样能得到高精度位置。

其他硬件改进包括稳定用于产生雷达线性调频的锁相环,以及为控制器 FPGA 编写一套简单快速的压缩算法——原本其 SD 卡接口带宽不足以实时写入数据。最关键的是他新增了干涉测量成像程序:无人机在不同高度沿同一路径飞两次,通过对比两次 passes 的相位信息即可反演目标高程。常规雷达成像假设地形恒定高程,会让高大物体看起来朝雷达方向倾倒;而干涉图则可生成精细高程地图。

Forstén 在 SAR 领域经验丰富,Hackaday 此前报道过他的自行车挂载式 SAR、低成本 SAR 方案,以及自制 SAR 入门指南。

本文来源:https://hackaday.com/2026-09-28/synthetic-aperture-radar-drone-gets-interferometric-imaging/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Hackaday reports that maker Henrik Forstén, more than a year after the first-generation version of his synthetic aperture radar (SAR) imaging drone, has completed a major upgrade: not only developing a more powerful autofocus algorithm to clean up radar images, but also extending the software to achieve high-resolution interferometric imaging.

The main bottleneck of the original radar system was GPS, with a resolution of only about 1 meter; previous sharpness improvements relied heavily on more precise estimates of the drone's position. A simpler but more expensive path is to add an RTK (Real-Time Kinematic) GPS receiver—with a fixed ground station continuously sending correction signals, accuracy can reach a few centimeters. Since the drone does not need real-time positioning, Forstén chose PPK (Post-Processed Kinematic) positioning: after the flight, comparing the recorded GPS signals with base station data also yields high-precision positions.

Other hardware improvements include stabilizing the phase-locked loop used to generate the radar's linear frequency modulation (chirp), and writing a simple, fast compression algorithm for the controller FPGA—originally, its SD card interface bandwidth was insufficient to write data in real time. Most critically, he added an interferometric imaging program: the drone flies the same path twice at different altitudes, and by comparing the phase information of the two passes, the target's elevation can be retrieved. Conventional radar imaging assumes constant terrain elevation, making tall objects appear tilted toward the radar; interferograms, however, can generate fine elevation maps.

Forstén has extensive experience in the SAR field; Hackaday previously reported on his bicycle-mounted SAR, low-cost SAR solutions, and a beginner's guide to DIY SAR.

Open-Source Synthetic Aperture Radar UAV Upgrade: Enables Interferometric Imaging and Elevation Map Output

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry