
Hackaday 报道,Mipmapping 是一种在不加重渲染负担的前提下为 3D 场景增加细节的多细节层级(LOD)技术。James Lambert 与 Michael Biggins(PhonicUK)几年前曾在真实的 N64 主机上演示过该方案,如今他们把同一思路移植到了 ESP32-S3 上,使用自研的 Jet 渲染引擎,项目已在 GitHub 开源(CubeCoders/JetMegatexturesDemo)。
LOD 渲染虽然显著提速,但需要大得多的纹理。此前 [James] 的 N64 演示在 64MB 卡带中占用了 40MB 纹理。为了塞进只有 16MB PSRAM、且不插 SD 卡扩展的 ESP32-S3,纹理进一步用 8-bit 索引压缩,最终仅占 5.01MB。Reddit 上的演示视频显示摄像机在场景中自由移动。
报道评价,尽管不如此前报道过的 Wipeout 移植那样炫目,但这个演示清楚地说明:即使没有真正的 3D GPU,ESP32-S3 也已经是一台足以与部分 1990 年代主机较量的游戏机器——这对需要在低成本 MCU 上驱动 LCD / 电子纸屏显的开发者同样具有参考价值。
本文来源:https://hackaday.com/2026-09-28/jet-megatextures-demo-for-esp32-s3/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Hackaday reports that Mipmapping is a multi-level-of-detail (LOD) technique that adds detail to 3D scenes without increasing the rendering burden. James Lambert and Michael Biggins (PhonicUK) demonstrated this solution on a real N64 console a few years ago, and now they have ported the same approach to the ESP32-S3 using their self-developed Jet rendering engine. The project has been open-sourced on GitHub (CubeCoders/JetMegatexturesDemo).
LOD rendering significantly improves speed, but requires much larger textures. The previous [James] N64 demo used 40MB of textures in a 64MB cartridge. To fit into an ESP32-S3 with only 16MB PSRAM and no SD card expansion, the textures were further compressed with 8-bit indexed color, ultimately taking up only 5.01MB. The demo video on Reddit shows the camera moving freely through the scene.
The report’s assessment says that, although it is not as dazzling as the previously reported Wipeout port, this demo clearly shows: even without a real 3D GPU, the ESP32-S3 is already a gaming machine capable of competing with some 1990s consoles—this also has reference value for developers who need to drive LCD / e-paper displays on low-cost MCUs.
