Critical Link 推出 MitySOM-AM62x/A/P:TI Sitara AM62 系列 260 针 SO-DIMM 模组,最高支持四路显示Critical Link Launches MitySOM-AM62x/A/P: TI Sitara AM62 Series 260-Pin SO-DIMM Module, Supporting Up to Four Displays


AI free token/AI免费积分
Critical Link 推出 MitySOM-AM62x/A/P:TI Sitara AM62 系列 260 针 SO-DIMM 模组,最高支持四路显示

CNX-Software 报道,Critical Link 发布基于 TI Sitara AM62 的工业级 260 针 SO-DIMM 系统模组家族 MitySOM-AM62x/A/P,面向嵌入式 Linux、工业自动化与 HMI 应用。三个型号定位分明:通用型 MitySOM-AM62、AI 型 MitySOM-AM62A、多媒体型 MitySOM-AM62P。

标准 AM62 模组最高四核 Arm Cortex-A53 @1.4GHz,配 400MHz Cortex-M4F 与双 PRU;AM62A 增加带矩阵乘法加速器的 C7x DSP(最高 2 TOPS)与图像信号处理器 ISP;AM62P 则配备算力超 50 GFLOPS 的 Imagination IMG BXS-4-64 GPU 和四通道 MIPI DSI 输出。

显示接口是本系列对屏幕开发者最值得关注的一点:MitySOM-AM62x 支持双路 1080p 显示(1 路 24-bit RGB + 2 路 4-lane OLDI/LVDS);AM62A 支持单路最高 2048×1080@60fps 的 24-bit RGB;AM62P 可实现最高 3840×1080 的多屏输出,同时具备 RGB、OLDI/LVDS 与 MIPI DSI。此外还提供 MIPI CSI-2 摄像头输入、双千兆以太网、双 USB2.0、最多 7 路 UART 与 3 路 CAN-FD。

存储方面 AM62x/AM62A 最高 128GB eMMC,AM62P 最高 256GB;内存从 4GB DDR4 到 16GB LPDDR4 不等。软件栈由 TI Processor SDK 与 Critical Link 的 Yocto Linux、U-Boot 源码、工具链构成,AM62P 另支持 TI Android SDK。

配套 MitySOM-AM62x/A/P 开发板套件在 Copant 商店售价 499 至 668.75 美元,提供双千兆网、双 CAN、HDMI、OLDI/LCD、音频、microSD 与 Wi-Fi/蓝牙模块位等接口。与 Variscite VAR-SOM-AM62、Toradex Verdin AM62、MYiR MYC-YM62X 等同类产品相比,Critical Link 的差异化在于把 AM62x/A/P 三种芯片封装进引脚兼容的同一 SO-DIMM 家族并共用一块开发板。

本文来源:https://www.cnx-software.com/2026-09-28/critical-link-mitysom-am62x-a-p-ti-sitara-am62-so-dimm-soms-for-edge-ai-and-industrial-automation/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

CNX-Software reports that Critical Link has launched the MitySOM-AM62x/A/P family of industrial-grade 260-pin SO-DIMM system-on-modules based on the TI Sitara AM62, targeting embedded Linux, industrial automation, and HMI applications. The three models have distinct positioning: the general-purpose MitySOM-AM62, the AI-focused MitySOM-AM62A, and the multimedia-focused MitySOM-AM62P.

The standard AM62 module features up to quad-core Arm Cortex-A53 at 1.4GHz, with a 400MHz Cortex-M4F and dual PRUs; the AM62A adds a C7x DSP with matrix multiplication accelerator (up to 2 TOPS) and an image signal processor (ISP); the AM62P is equipped with an Imagination IMG BXS-4-64 GPU delivering over 50 GFLOPS and quad-channel MIPI DSI output.

The display interface is the most noteworthy aspect of this series for display developers: the MitySOM-AM62x supports dual 1080p displays (one 24-bit RGB + two 4-lane OLDI/LVDS); the AM62A supports a single 24-bit RGB output up to 2048x1080@60fps; the AM62P supports multi-screen output up to 3840x1080, with RGB, OLDI/LVDS, and MIPI DSI. In addition, it provides MIPI CSI-2 camera input, dual Gigabit Ethernet, dual USB 2.0, up to 7 UARTs, and 3 CAN-FD interfaces.

In terms of storage, the AM62x/AM62A support up to 128GB eMMC, and the AM62P up to 256GB; memory ranges from 4GB DDR4 to 16GB LPDDR4. The software stack consists of the TI Processor SDK along with Critical Link's Yocto Linux, U-Boot source code, and toolchain; the AM62P additionally supports the TI Android SDK.

Matching development board kits for the MitySOM-AM62x/A/P are priced from $499 to $668.75 at the Copant store, offering interfaces such as dual Gigabit Ethernet, dual CAN, HDMI, OLDI/LCD, audio, microSD, and Wi-Fi/Bluetooth module sockets. Compared with similar products such as the Variscite VAR-SOM-AM62, Toradex Verdin AM62, and MYiR MYC-YM62X, Critical Link's differentiator is packaging the AM62x/A/P three chips into a pin-compatible single SO-DIMM family sharing one common development board.

Critical Link Launches MitySOM-AM62x/A/P: TI Sitara AM62 Series 260-Pin SO-DIMM Module, Supporting Up to Four Displays

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry