
CNX-Software 报道,Walnut Pi 发布低成本树莓派 CM5 兼容计算模组 CM2,基于全志 T527 八核 Cortex-A55 处理器,最高 4GB LPDDR4、16GB eMMC,可选无线模组。
它本质上是该公司信用卡尺寸的 Walnut Pi 2B 单板机的 Compute Module 形态版,通过两个 100 针高密度板对板连接器引出全部 I/O。相对树莓派 CM5 的增值点:模组上自带 WiFi 6 + 蓝牙 5.0(AW869)、千兆以太网 PHY,以及 T527 内置的 2 TOPS NPU;短板是全志 T527(4×A55@1.8GHz + 4×A55@1.42GHz + E906 RISC-V @200MHz)不如 CM5 的博通 BCM2712(4×Cortex-A76),且与所有「CM5 兼容」模组一样只有部分电气兼容。
规格:Mali-G57 MC1 GPU(OpenGL ES 3.2 / OpenCL 2.2 / Vulkan 1.3)、600MHz HIFI4 音频 DSP;显示接口支持 HDMI 最高 4Kp60 与 4 通道 MIPI DSI 最高 1080p60,另有 4 通道 MIPI CSI 摄像头、USB 3.0、3×USB 2.0、PCIe Gen2 x1(与 USB3 复用)。尺寸 55×40mm、重 9.6g。系统不能装 Raspberry Pi OS,官方提供 Debian 12 系的 Walnut Pi OS、Ubuntu、Android 与 Home Assistant。
配套 IO 板引出 HDMI、MIPI DSI/CSI、M.2 Key-M(NVMe SSD)、彩色 40 针 GPIO、千兆网口、3.5mm 音频等。CM2 在速卖通售价 28-49 美元(2GB/16GB/无线版 49 美元,对比同规格树莓派 CM5 的 97.5 美元);CM2+IO 板套装 37.80-58.80 美元,加外壳再补 7.70 美元。这是国内厂商(此前有 MYiR、定昌等 T527 SOM)首款采用树莓派 CM5 外形标准的模组。
本文来源:https://www.cnx-software.com/2026-09-29/walnut-pi-cm2-a-cheaper-raspberry-pi-cm5-alternative-based-on-allwinner-t527-octa-core-soc/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
CNX-Software reports that Walnut Pi has released the low-cost Raspberry Pi CM5-compatible compute module CM2, based on the Allwinner T527 octa-core Cortex-A55 processor, with up to 4GB LPDDR4, 16GB eMMC, and an optional wireless module.
It is essentially the Compute Module form-factor version of the company's credit-card-sized Walnut Pi 2B single-board computer, bringing out all I/O through two 100-pin high-density board-to-board connectors. Value-adds over the Raspberry Pi CM5: the module itself carries WiFi 6 + Bluetooth 5.0 (AW869), a Gigabit Ethernet PHY, and the 2 TOPS NPU built into the T527; the shortcoming is that the Allwinner T527 (4×A55@1.8GHz + 4×A55@1.42GHz + E906 RISC-V @200MHz) is inferior to the CM5's Broadcom BCM2712 (4×Cortex-A76), and like all "CM5-compatible" modules, it is only partially electrically compatible.
Specifications: Mali-G57 MC1 GPU (OpenGL ES 3.2 / OpenCL 2.2 / Vulkan 1.3), 600MHz HIFI4 audio DSP; display interfaces support HDMI up to 4Kp60 and 4-lane MIPI DSI up to 1080p60, plus a 4-lane MIPI CSI camera interface, USB 3.0, 3×USB 2.0, PCIe Gen2 x1 (shared with USB3). Dimensions 55×40mm, weight 9.6g. Raspberry Pi OS cannot be installed; the official offerings are Walnut Pi OS based on Debian 12, Ubuntu, Android, and Home Assistant.
The companion IO board brings out HDMI, MIPI DSI/CSI, M.2 Key-M (NVMe SSD), a color 40-pin GPIO, Gigabit Ethernet port, 3.5mm audio, etc. The CM2 is priced at US$28-49 on AliExpress (US$49 for the 2GB/16GB/wireless version, compared to US$97.5 for a Raspberry Pi CM5 with the same specs); the CM2+IO board bundle is US$37.80-58.80, plus US$7.70 more for a case. This is the first module from a domestic manufacturer (previously there were T527 SOMs from MYiR, Dingchang, etc.) to adopt the Raspberry Pi CM5 form-factor standard.
