十几年前,模块化一度被视作智能手机最性感的将来之一。
2013 年,摩托罗拉公布 Project Ara:一块「骨架」上,处理器、显示屏、电池、传感器都可以像积木一样拆装。既然电脑可以自己换显卡、内存和硬盘,为什么手机不能?
相信很多人的第一反应也和我一样:既然什么都能换,那如果给手机装上一套更大的镜头和传感器,是不是就能得到一张媲美相机、甚至单反的高画质照片?

许多厂商也抱着类似的期待,做过不少尝试。只不过从最终的市面表现,以及真正用起来的感受来看,这些尝试大多没能成为主流。
此后的十几年里,手机影像却以另一条路线飞速发展。
更大的传感器、更长的潜望长焦、更复杂的光学结构,加上计算摄影,手机可以拍出十几年前几乎难以想象的照片。
但物理尺寸仍然是手机摄影难以逾越的边界。所以笔者可以看到增距镜这种产物的浮现,虽然主要的情形可能还是在演唱会,不过其本质还是——把手机里塞不下的东西,重新放到手机外面。
也就在 2026 年这个节点,华为也给出了他的答案:睿影 Z10 模块相机。
把相机挂在手机上
只看外形的话,睿影 Z10 很像一只体积夸张的手机增距镜。
但两者实际上不是一类东西。
增距镜的工作,是在手机已有镜头前再增加一组光学结构,借助改变等效焦段,让原本的长焦看得更远。无论外挂的镜片有多大,真正负责成像的传感器、镜头和图像处理链路,依旧属于手机原本的那颗摄像头。
Z10 不一样。
它的外接模组里,本身就有一颗完整的传感器,以及一套独立的变焦镜头。
所以要简单理解 Z10 这个模组的存在,最合适的方式就是把他看作一台「一分为二的卡片机」——
镜头和 CMOS 留在外挂模组里,负责手机机身最难妥协的光学和感光;表明、操作、计算、存储以及分享,则交给手机。

细看参数,这种「似是故人来」的感觉会更显著。
Z10 使用一颗 1 英寸、5000 万像素的 RYYB 传感器,配备一套覆盖 24mm 到 240mm 的 10 倍连续光学变焦镜头,最大光圈 F2.0-F4.5。
作为参照,索尼黑卡 RX100 VII 同样使用 1 英寸传感器,有效像素约 2010 万,镜头覆盖 24-200mm,最大光圈 F2.8-F4.5。
当然,这只是参数上的近似,只不过笔者也大概能品出 Z10 的价值:
它像是把一台索尼黑卡相机最核心的光学和感光部分拆下来,挂到了手机背后。
在笔者的上手感受中,这套覆盖 24mm 到 240mm 的连续光学变焦,带来了显著更大的焦段挑选和构图自由。
独立的一英寸传感器,再配合这套镜头本身的光圈和中长焦焦段,在拍摄人像或近距离特写时,也更容易直接取得自然的光学虚化。
这样的感受是笔者在手机摄影上难以企及的。


向左滑动查看更多内容
仔细想,这实际上是一个挺合乎逻辑的分工。
今天的旗舰手机已经具备格外强的计算能力、足够好的显示屏,以及成熟的操作平台、联网、存储和内容分发能力。
尤其是在今天这条轻量化的影像处理与分发链路里,从拍摄、简单编辑到发布,手机相比传统相机「拍摄—拷卡—导入—修图—导出」的流程,不能说更加专业,但几乎一定更加直接,也更加省事。
光学需要空间,传感器需要面积,这是最难以被手机替代的部分。
于是 Z10 挑选把这些最受手机体积限制的部分放到外面,把手机已经格外擅长的事情继续还给手机。

最终,Z10 的影像模组就可以借助 HyperClick 超级卡口安装在华为 Mate 90 Pro Max 典藏版以及非凡大师两款手机的机身背部,借助接口与手机完成连接和数据交互。
不过实际上在去年的 MWC 上,小米也展示了一个类似的思路。它同样在改装版小米 15 背板中央加入连接结构,借助触点与 LaserLink,让一套搭载 M4/3 传感器和 35mm F1.4 镜头的独立成像模块接入手机的影像平台。
形态不同,但核心的解法还是颇为类似:把一套位于机身之外的独立成像平台,连接到手机上。
实际上在这款机型刚亮相时,我就觉得,它或许代表了移动影像接下来值得探索的一条路径。
只是后来,小米并没有继续推动它走向量产,这套镜头最终还是停留在了概念阶段。
华为在这个基础上再进了一步——
在做出了一套外接相机模组之外,还把与它配套的硬件外观,真正写进了一台量产旗舰的机型定义里。

镜头式相机,等了手机十年
实际上不只前文提到的小米,在模块化,或者说外置影像模组这条路上,过去已经有不少厂商前仆后继。
事实上,如果只是想把一颗大底传感器和一支好镜头挂到手机上,索尼真的就拿黑卡做过实验。
2013 年,索尼就推出过 QX100——这是一个镜头式相机(Lens-Style Camera),配备一英寸传感器、3.6 倍光学变焦镜头,甚至还有独立处理器、电池和存储。可以说,当年索尼就是将一台 RX100 黑卡相机做成了可以外挂在手机上的样子。

再往后,索尼还推出了迭代机型 QX1,甚至直接用上了 APS-C 传感器和 E 卡口。
除了索尼,OPPO 也曾推出过形态相近的 O-Lens 1,把自带传感器和变焦镜头的相机夹在手机上,再借助 Wi-Fi 连接。几年后的摩托罗拉则更近了一步,它把哈苏相机模块接进了手机的供电、操作和存储流程,已经有了较完整的硬件整合。

不过把目光回到 2013 年的索尼,这仍然是挺令人惊叹的,毕竟在遥远的 13 年前,索尼就已经提出了与现今颇为相似的机型形态。
不过,这些早期外挂相机使用的是一种很直接的思路——
把完整的成像链路都留在外挂相机这一端。
传感器产生的原始数据,先在相机内部经过 ISP (图像信号处理器)处理,再开展编码和压缩。实时取景时,手机接收到的已经是经过处理和压缩的预览画面;拍照完成后,再把 JPEG 等成片传给手机。
换句话说,手机并没有真正参与成像。它更像是一块无线监视器,负责表明取景画面、发送拍摄指令,以及接收最后的照片。
当年摄影媒体 DPReview 评价,如果只是从「光学成像」这个角度来看待这个机型,QX100 并没有太显著的短板。
当然了,只是成像层面。

镜头式相机的难题显而易见,别忘了,那还是 2013 年——
彼时 4G 才刚刚开始进入普通人的生活,整个移动互联网和无线传输环境都还处在相对早期的阶段;智能手机的表现、无线连接的稳定性,是远不能和今天相比。
QX100 想做的,却是让两台独立设备借助 Wi-Fi 协同工作,并在感受上尽可能接近原生摄像头。在当时,这几乎是天方夜谭。
所以即便相机与手机之间传输的已经是数据量更低的预览画面,延迟依旧颇为显著。
当连接需要等待,取景可能有延迟,照片传输也需要时间,这种割裂感注定让机型使用的感受大打折扣,更何况是对于手机摄影这种即时性要求很高的情形。
另一重限制来自于:手机本身,并不处在真正的成像链路里。
彼时手机本身的算力有限,ISP、GPU 乃至后来越来越关键的 NPU,都还远没有发展到今天的程度。
与其把庞大的传感器数据实时送进手机,再要求手机完成后续计算,不如先让相机自己把照片处理好,再把结果交给手机,会是更现实的挑选。
到了今天,这个前提已经完全不一样了。
各种旗舰手机的算力甚至达到了一种「过剩」的状态。过去需要交给独立相机处理器完成的不少工作,如今手机自己的 SoC、ISP 和 NPU 已经可以接手,没有必要再把完整的成像计算全部留在外挂模块里。

而比「算得动」更关键的,是过去十几年移动影像发展出来的另一套摄影体系:
计算摄影。
它本就是手机在有限体积下,对物理光学不足的一种补偿。于是有了 HDR、多帧融合之类,厂商们开始用算法去榨取有限光学硬件可以给出的信息。

外接影像模组的浮现,让这件事情有了一个很有意思的变化。
当一颗更大的传感器、更完整的镜头和更长的光学结构被放到机身之外,这套本就已经高度成熟的计算摄影体系,反而可以取得质量更高的「原材料」。
更好的光学输入,加上相当成熟的计算摄影,二者协同而不是相互取代,光学成像和计算摄影在这里达成了叠加。
外挂模组可以直接利用手机已有的色彩、HDR、多帧、降噪和 AI 影像能力,不必自己从头建立一套完整的移动摄影管线。
从另一个角度来看,当更多计算被手机接手,外挂模组可以更集中地承担自己真正不可替代的工作——光学和感光,将有限的空间留给更大的传感器、更好的镜头,以及更复杂的变焦机构。
从 Z10 的相关专利也能看到这样的思路:
模块向手机给出的,可以是供后续成像处理使用的图像数据,而不只是已经在模块端处理、压缩好的预览数据。这样一来,手机才能更深地参与后续的色彩、降噪、HDR 等计算。

不过,既然手机需要参与到成像中,也就意味着,传感器产生的数据,需要足够快地送进手机。高速传输因而成了这套架构里最关键的一环。
2025 年小米展示模块化光学平台时,就特别强调,可以借助 LaserLink 达成 10Gbps 光学数据传输,并让外接模块直接调用手机端的 AISP。

华为 Z10 走的也是类似方向。
从笔者的实际上手来看,Z10 在取景和操作过程中并没有表现出显著的传输延迟。至于它具体用了多大的数据带宽,华为当下并没有公布明确规格。
不过在 Z10 相关专利中可以看到,在部分达成方式下,模块相机向主机设备传输图像数据的速率可以达到或超过 10.7Gbps,以满足大数据量图像信号的传输需要。
所以,华为挑选在这个时间点把 Z10 推向市面,已经不能说是一种激进的冒险,更像是在一个已经成熟的工艺环境里,水到渠成地落地成一款机型。

手机不会「杀死」相机,但手机可以「成为」相机
不过,尽管 Z10 已经走向量产且工艺思路成熟,但这仍旧是一次小众尝试。
毕竟,接近 6000 元的售价,以及绑定典藏版、非凡大师等高端机型,实际上已经可以看出,在现阶段这大概率不是一个追求巨大出货规模的大众配件。
华为更像是在高端市面里,先为这套新的机型形态寻找一个落脚点。

抛开售价因素,我想更值得更值得讨论的是这个机型上市本身——这不再只是一个工艺难题,而是一个市面难题。
差不多十年前,手机就已经取代相机,成为最流行的拍照工具。按照这条路径继续发展下去,除了专业使用者,普通人似乎没有再额外带一台相机出门的必要。
但现实并非如此——
过去十年,笔者看到了不少新相机品类冒头以及经典便携相机的回潮,无论是大疆影石,还是富士理光,这些机型的形态、售价和画质取向各不相同,不过它们实际上都在兑现一件事情:出片承诺。
消费者不一定在意里面到底是几英寸的 CMOS、用了几组镜片。笔者真正购买的,是一种出片的确定性——
是一种「我带上这个东西,到了某个情形,它能让我更容易拿到想要的照片」的确定性。
当下各家的增距镜可以占据演唱会看台的每一个角落,Pocket 到了国庆这样的旅行旺季甚至会浮现租金上涨,本质上都来自同一种需要。
这本质上是一次交换。
为了某一种特定的影像质感,或者为了拍到原本很难拍到的画面,我愿意多带一个设备。
这也为 Z10 给出了十年前那些机型不曾具备的市面土壤。
工艺已经准备好了,人们也更清楚,自己愿意为什么样的画面付出额外成本。
那个曾经太早浮现的想法,这一次,可能终于等到了属于它的时代。
本文来源:https://www.ifanr.com/1682933
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
More than a decade ago, modularity was once seen as one of the most exciting futures for smartphones.
In 2013 Motorola announced Project Ara: a "skeleton" on which the processor, display, battery and sensors could all be swapped out like building blocks. Since you can change the graphics card, memory and storage in a PC, why not in a phone?
Many people’s first reaction, mine included, would be: if everything can be swapped, then fitting a bigger lens and sensor array would surely yield photos on a par with a camera or even a DSLR, right?
Many makers shared similar expectations and made a number of attempts. But judging by eventual market performance and the experience of actually using them, most of those attempts failed to go mainstream.
Over the following decade-plus, smartphone imaging advanced rapidly by a different route.
Larger sensors, longer periscope telephoto, more complex optical structures and computational photography let phones capture photos that would have been nearly unimaginable fifteen years ago.
Physical size nevertheless remains the boundary smartphone photography struggles to cross. That is why telephoto extenders appeared: their main use case may still be concerts, but the essence is the same — putting back outside the phone what no longer fits inside it.
At this point in 2026, Huawei has offered its own answer: the Ruiying Z10 modular camera.
Attaching the camera to the phone
Judging by appearance alone, the Ruiying Z10 looks like an oversized phone telephoto extender. But the two are not the same kind of product.
A telephoto extender works by adding another optical assembly in front of the phone’s existing lens, changing the equivalent focal length so the built-in telephoto sees further. No matter how large the add-on lens, the sensor, lens and image processing chain doing the actual imaging still belong to the phone’s original camera.
The Z10 is different. Its external module contains a complete sensor of its own and an independent zoom lens.
The simplest way to understand the Z10 module is to think of it as a "compact camera split in two": the lens and CMOS stay in the external module, handling the optics and light-gathering that the phone body finds hardest to accommodate; the display, controls, compute, storage and sharing are left to the phone.
Looking at the specs, this "familiar stranger" feeling grows stronger.
The Z10 uses a 1-inch, 50-megapixel RYYB sensor and a 10x continuous optical zoom covering 24 mm to 240 mm, with a maximum aperture of F2.0-F4.5.
For reference, the Sony Cyber-shot RX100 VII also uses a 1-inch sensor with about 20.1 effective megapixels, a lens covering 24-200 mm and a maximum aperture of F2.8-F4.5.
This is only a specs-level approximation, but the value of the Z10 is fairly clear: it feels like the core optical and sensing portion of a Sony Cyber-shot has been detached and hung on the back of a phone.
In my hands-on experience, the continuous optical zoom covering 24 mm to 240 mm brought notably greater freedom in choosing focal length and composing shots.
The independent 1-inch sensor, combined with the aperture and mid-to-telephoto focal range of this lens, also makes it easier to achieve natural optical bokeh when shooting portraits or close-ups.
That is something smartphone photography has difficulty delivering.
Swipe left to see more content
On reflection, this is a fairly logical division of labor.
Today’s flagship phones already have exceptionally strong compute, a good enough display, and mature platforms for control, connectivity, storage and content distribution.
Especially along today’s lightweight imaging and distribution chain, the phone workflow of capture, light edit and publish is certainly not more professional than a camera’s capture-copy-import-retouch-export flow, but it is almost certainly more direct and far less of a hassle.
Optics need space and sensors need area — these are the parts a phone can least easily replace.
So the Z10 puts the parts most constrained by phone volume outside, and leaves the phone doing what it already does very well.
Ultimately the Z10 imaging module mounts on the back of the Huawei Mate 90 Pro Max Collectors Edition and Ultimate Edition models via the HyperClick super mount, connecting and exchanging data with the phone through the interface.
In reality, Xiaomi showed a similar idea at last year’s MWC. It also added a contact structure to the back panel of a modified Xiaomi 15, using pogo contacts and LaserLink to connect a standalone imaging module with a 4/3 sensor and a 35 mm F1.4 lens to the phone’s imaging platform.
The form differs, but the core solution is quite similar: connect an independent imaging platform outside the body to the phone.
When this device first appeared, I felt it might represent a path worth exploring for mobile imaging. It was just that Xiaomi later did not push it to mass production, and the lens ultimately stayed at the concept stage.
Huawei took a further step on this basis — beyond making an external camera module, it actually wrote the matching hardware form factor into the definition of a mass-produced flagship phone.
The lens-style camera waited ten years for the phone
As mentioned above, not only Xiaomi, but quite a few makers have gone all in on the modular or external imaging module path over the years.
If all you wanted was to hang a large sensor and a good lens off a phone, Sony really did experiment with this using the Cyber-shot.
In 2013 Sony launched the QX100 — a lens-style camera with a 1-inch sensor, a 3.6x optical zoom lens, and even its own processor, battery and storage. Put simply, Sony turned an RX100 Cyber-shot into something that could clip onto a phone.
Sony later launched the QX1, which even used an APS-C sensor and an E-mount.
Beyond Sony, OPPO also offered the similar O-Lens 1, which clamps a camera with its own sensor and zoom lens onto the phone and connects over Wi-Fi. Motorola went further a few years later by integrating a Hasselblad camera module into the phone’s power, controls and storage flows, giving fairly complete hardware integration.
But looking back at Sony in 2013, it is still astonishing — 13 years ago Sony had already proposed a product form quite similar to today’s.
What these early external cameras share is a very direct idea: keep the entire imaging chain on the camera side of the accessory.
Raw data from the sensor is first run through the ISP inside the camera, then encoded and compressed. For the live view, the phone already receives a processed and compressed preview image; after the shot is taken, the JPEG and other finished files are transferred back…