IT之家 10 月 5 日消息,本田今日宣布,旗下研发子公司本田工艺研究所,与大成建设、大成道路工艺三方共同研发出可对行驶中电动汽车开展非接触充电的“磁耦合方式无线供电道路平台”(以下简称“无线供电道路平台”)基础核心工艺。
三方计划于 2027 财年(IT之家注:2026 年 4 月 1 日~2027 年 3 月 31 日)之后(即 2027 年四月或之后)正式开展高速公路实测。
官方表示,该平台整合了三方的核心长处:本田自主研发的高功率密度、兼容直流配电的电能收发单元,大成建设的高响应直流电源平台,以及大成道路工艺成熟的地下管线及道路埋设施工工艺。该平台兼备大功率供电表现与高质的工程施工便利性,将来可广泛适配从乘用车到大型商用车等多种车型。
自 2026 年底起,三方将在大成建设集团下一代工艺实证中心田村测试基地“T-FIELD / TAMURA”铺设专用试验道路。届时将借助真实车辆展开累计 100 万轮次(等效 49kN 标准单轮荷载)的加载碾压试验,平台评估长期耐久性,并同步推开展驶中动态无线供电表现测试以及电磁泄漏防护对策研发,力求兼顾地面端模块的高质供电表现与道路地下结构物的结构安全性。
在此基础上,团队将面向大型商用车情形开展最大 150kW 大功率输出工况下的表现验证,并深化高速行驶条件下的平台可靠性测试,稳步推进面向实际道路运营的各项工艺研发。
本文来源:https://www.ithome.com/1/009/827.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT Home, October 5 — Honda announced today that its R&D subsidiary Honda Research Institute, together with Taisei Corporation and Taisei Road Engineering, have jointly developed the core technology for a "magnetic coupling wireless charging road system" (the "wireless charging road system") that can charge electric vehicles non-contact while they are moving.
The three parties plan to begin formal highway testing after fiscal 2027 (IT Home note: April 1, 2026 to March 31, 2027) — that is, in April 2027 or later.
Officially, the platform combines the core strengths of all three: Honda’s in-house high power density, DC-distribution-compatible power send-and-receive unit; Taisei’s high-response DC power platform; and Taisei Road Engineering’s mature underground conduit and road embedding construction techniques. The platform combines high-power delivery with high-quality construction practicality, and in future can be adapted to everything from passenger cars to large commercial vehicles.
From the end of 2026, the three parties will lay a dedicated test road at the Tamura test site "T-FIELD / TAMURA," Taisei’s next-generation technology demonstration center. Real vehicles will then be used for cumulative load-roll testing of 1 million cycles (equivalent to a 49 kN standard single-wheel load) to evaluate long-term durability, while simultaneously running dynamic wireless charging performance tests in motion and developing countermeasures against electromagnetic leakage — balancing high-quality ground-side power delivery with the structural safety of underground road structures.
On this basis, the team will verify performance up to 150 kW output for large commercial vehicles and deepen reliability testing under highway conditions, steadily advancing the engineering development needed for real road operation.

