爱好者自制天气时钟:基于 Freenove FNK0103S 开发板、可选装人在传感器Hobbyist builds a weather clock on the Freenove FNK0103S board, with optional presence radar


AI free token/AI免费积分

IT之家 10 月 5 日消息,据外媒 XDA 报道,一位爱好者 sudu1988 在 Reddit 发帖,展示了自己构建的天气时钟,该机可以从 Open-Meteo 获取天气数据,并表明当前时间、实时天气以及将来天气预报。

硬件维度,该机基于 Freenove FNK0103S 开发板,搭载 ESP32-WROOM-32E 芯片,并配备一块 4 英寸 ST7796 表明屏和 XPT2046 电阻式触摸模组。

爱好者自制天气时钟:基于 Freenove FNK0103S 开发板、可选装人在传感器

爱好者自制天气时钟:基于 Freenove FNK0103S 开发板、可选装人在传感器

除此之外,该机还可选配“人体存在雷达”。据 sudu1988 介绍,相应人体检测机制利用 Hi-Link HLK-LD2410C 毫米波雷达达成,设备检测到有人靠近并且距离足以看清显示屏时,才会自动点亮表明屏;周围无人时则保持熄屏状态,从而减少不必要的耗电。

爱好者自制天气时钟:基于 Freenove FNK0103S 开发板、可选装人在传感器

本文来源:https://www.ithome.com/1/009/819.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

IT Home, October 5 — Overseas outlet XDA reported that a hobbyist, sudu1988, posted on Reddit a weather clock they built. The device pulls weather data from Open-Meteo and displays the current time, live weather and the forecast ahead.

The hardware is based on the Freenove FNK0103S development board with an ESP32-WROOM-32E chip, paired with a 4-inch ST7796 display and an XPT2046 resistive touch module.

Hobbyist builds a weather clock on the Freenove FNK0103S board, with optional presence radar

Hobbyist builds a weather clock on the Freenove FNK0103S board, with optional presence radar

Beyond that, the clock can be fitted with an optional human-presence radar. According to sudu1988, the presence detection uses a Hi-Link HLK-LD2410C millimeter-wave radar, and the display only lights up when someone approaches close enough to read it; when nobody is around the screen stays off, reducing unnecessary power consumption.

Hobbyist builds a weather clock on the Freenove FNK0103S board, with optional presence radar

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry