谷歌日本把键盘做成传送带:打错字要等一整圈才能拿到退格键

这一定是十月里又到了四月:谷歌日本又带来一个既搞笑又完全不实用的键盘重设计——一条传送带。这次它连同固件、STL 文件与完整制作指南一起放到了 GitHub 上,如果你也想在打错字后等一整圈才拿到退格键,或者想写出「ooid」「princesship」这样的有趣单词,就动手吧。
从下面嵌入的视频可以看到它的实际运作,不过单看照片大概就明白了:四排错位排列的按键,每一排都是 3D 打印的链条,链上装着机械轴,由底座内的一台电机驱动。每一排还有柔性 PCB 维持电气连接,不过按键触发的电信号究竟如何从传送带上传到电脑,目前并不清楚。制作指南中这一部分仍标注为「TBD」,源码看起来也未完成。
这些细节也许后续会补充,也可能永远不会公布——毕竟这显然是个玩笑。但既然官方已经把 STL 文件放出来,我们也就忍不住想研究它到底怎么才能真正工作起来。每个链带上放一颗带 BLE 的微控制器?每个按键贴 RFID 标签,底座装读头?柔性 PCB 上布 SMD LED,让每个按下的按键在经过传感器时闪出对应的 ASCII 码?理论上这些方案都行,但该选哪个,就交给你决定了。
我们一直很喜欢谷歌日本那些古怪的键盘。必须说,相比几年前的那顶帽子,这次的传送带键盘几乎算「实用」了,不过造型分上还是 rotary-phone 那款更胜一筹。从某些角度看,它恰好是当年链式打印机的反向版本。
感谢 CityZen 的线索分享。如果你的十月更偏「惊悚」而非「搞怪」,我们同样想听你分享;如果你真的做出了这些 Gboard,也欢迎来稿。
本文编译自英文原文:https://hackaday.com/2026/10/05/conveyor-belt-gboard-brings-the-keys-to-you/
本文来源:https://hackaday.com/2026/10/05/conveyor-belt-gboard-brings-the-keys-to-you/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

It must be April in October again, because Google Japan has a new, hilariously impractical reimagining of the keyboard: . This time it’s on GitHub with firmware, STLs, and a full build guide if you, too, want to wait a full cycle to get the ‘backspace’ key whenever you make a typo, or to write such fun words as “ooid” or “princesship”.
You can watch it in action in the , but just the photo probably gives you the idea: the four staggered rows of keys are each 3D-printed chains holding mechanical key switches, driven from a motor in the base. Each row also has a flexible PCB to keep everything wired together, though it’s unclear how those electrical impulses from the key presses get off the conveyor belt and into your computer. That part of the build guide is “TBD” and the source code doesn’t appear to be complete.
Those details may be forthcoming, or it might never be revealed because this is obviously a joke, but now that they’ve gone to the effort of providing STLs, we’re now invested in figuring out how to actually make it work. A BLE-equipped microcontroller in each belt? RFID tags on each key, with readers in the base? SMD LEDs on the flex PCB that flash out the ASCII code of each pressed key as they whiz past a sensor? In theory, any of those should work, but which should we use? You decide!
We like Google Japan and their weird keyboards, and we have to say that compared to the , this one is almost practical, though the wins on style points. In some ways, it occurs to us that this is the exact inverse of the Thanks to [CityZen] for the tip! If October for you is more “spooky” than “silly”, we still want to know about it. Or if you build any of the Gboards. Either way, let us know