XIMEA MU003TG-SY-UC 发布:基于索尼 IMX556 的 0.3MP 模块化 USB 3.0 ToF 相机XIMEA MU003TG-SY-UC Released: 0.3MP Modular USB 3.0 ToF Camera Based on Sony IMX556


AI free token/AI免费积分
XIMEA MU003TG-SY-UC 发布:基于索尼 IMX556 的 0.3MP 模块化 USB 3.0 ToF 相机

XIMEA MU003TG-SY-UC 是一款微型工业飞行时间(ToF)相机,搭载 0.3MP 索尼 IMX556 CMOS 传感器,采用全局快门,分辨率 640×480,帧率 60 FPS。其紧凑的 26.4×26.4×28.67 毫米外壳与 31 克重量,使其非常适合空间受限的嵌入式视觉系统、机器人、无人机、自助终端、3D 扫描、人脸识别及其他机器视觉应用。

该模块通过 14 针 I-PEX Cabline SS 连接器提供 USB 3.2 Gen 1 接口,用于数据、供电与控制。另有一个 10 针 Cabline V 连接器,用于与外部 VCSEL 照明光源同步。相机本身不含照明光源或光学带通滤光片,因此进行深度感知时需另行配备这些组件。

XIMEA MU003TG-SY-UC 规格

  • 传感器——索尼 IMX556 CMOS 飞行时间传感器,全局快门,无片上滤光片
  • 分辨率——30 万像素(640×480);有效面积 6.4×4.8 毫米
  • 像素尺寸——10 微米 × 10 微米
  • 光学规格——1/2 英寸(对角线 8.0 毫米)
  • 数字化——12 位
  • 读出——1、2 或 4 个 ToF 相位;每秒 60 / 120 / 240 个相位,实测 60 FPS 传输上限
  • 下采样——x1、2×2 和 4×4 像素合并(640×480、320×240、160×120)
  • 曝光——0.25 微秒至 1000 微秒
  • 主机接口——USB 3.2 Gen 1(5 Gbps),经 Micro-Coaxial I-PEX Cabline SS 14 位插座
  • 照明接口——Micro-Coaxial I-PEX Cabline V 10 位插座(5V 供电、高速 LVDS 切换、I2C 遥测)
  • 镜头卡口——C 卡口(标配,已预装);S 卡口(选配,可将机身深度缩减至 23.67 毫米)
  • I/O——2 路非隔离数字输入/输出(3.3V 逻辑)和 2 路数字输出
  • 供电——5V(4.5–5.5V);功耗 0.45W(空闲)、1.80W(典型串流)、2.00W(峰值)
  • 尺寸——26.4×26.4×28.67 毫米(含 C 卡口)
  • 重量——31 克(不含转接件)
  • 工作温度——0 至 50 摄氏度(环境温度)

每个像素有两个电荷存储节点 A 和 B。入射光会按照照明调制的节奏在两者之间分配。主机可以只读 A、只读 B、把 A 和 B 作为独立图像读出,或读取合并结果 A+B 与 A−B,以及 RAW 灰阶。深度在主机端计算,或在 CamTool 的 ToF 插件中计算,而不是直接输出成品点云。该传感器在可见光谱范围内同样敏感,但同时获得高质量深度与可见光成像需要不同的曝光与照明条件,且会降低性能。

相机可通过 C/C++、C# 和 Python 使用 XIMEA 的 xiAPI,支持 Windows 10/11、Linux(Ubuntu)以及 macOS 10.8 及以上版本的软件包。它还支持 GenTL/GenICam,可与 OpenCV、MATLAB、HALCON 和 LabVIEW 集成。由于该相机目前属于工程样品,支持通过 Beta 软件包提供,LTS 版本可能尚不支持此型号。

xiCOP 工具负责相机配置、诊断和固件更新。同一软件包中还包含 CamTool,其带有专用的 ToF 插件,可根据相机的相位数据计算并显示深度图。相机同时支持自由采集和触发采集,包括通过软件或硬件实现的边沿触发与电平触发,以及突发采集。

XIMEA 尚未公布这款微型 IMX556 ToF 传感器的价格,目前它作为工程样品列出。要搭建一套可用的 ToF 系统,还需要 VCSEL-SLIM-W 照明板、控制与数据线缆以及 Micro-B 转接器;USB 集线器、安装支架和 S 卡口转接器则为可选配件。

本文来源:https://www.cnx-software.com/2026/10/06/ximea-mu003tg-sy-uc-a-miniature-modular-0-3mp-usb-3-0-tof-sensor-based-on-sony-imx556/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

The XIMEA MU003TG-SY-UC is a miniature industrial time-of-flight (ToF) camera featuring a 0.3MP Sony IMX556 CMOS sensor with global shutter, offering 640×480 resolution at 60 FPS. Its compact 26.4×26.4×28.67mm housing and 31g weight make it ideal for space-constrained embedded vision systems, robotics, drones, kiosks, 3D scanning, facial recognition, and other machine vision applications.

The module provides a USB 3.2 Gen 1 interface for data, power, and control via a 14-pin I-PEX Cabline SS connector. A separate 10-pin Cabline V connector is available for synchronization with external VCSEL illumination sources. The camera itself does not include illumination or an optical bandpass filter, so these components must be supplied separately for depth sensing.

Dimensions: 26.4×26.4×28.67mm (with C-mount) Weight: 31g (excluding adapters) Operating temperature: 0 to 50°C (ambient)

Each pixel has two charge storage nodes, A and B. Incident light is distributed between them in sync with the illumination modulation. The host can read A only, B only, A and B as separate images, or read combined results A+B and A−B, along with RAW grayscale. Depth is computed on the host side or in CamTool's ToF plugin, rather than being output as a ready-made point cloud. The sensor is also sensitive in the visible spectrum, but achieving high-quality depth and visible-light imaging simultaneously requires different exposure and illumination conditions and reduces performance.

The camera can be used via XIMEA's xiAPI in C/C++, C#, and Python, with packages supporting Windows 10/11, Linux (Ubuntu), and macOS 10.8 and above. It also supports GenTL/GenICam and integrates with OpenCV, MATLAB, HALCON, and LabVIEW. As the camera is currently an engineering sample, it is available through a beta package; LTS versions may not yet support this model.

The xiCOP tool handles camera configuration, diagnostics, and firmware updates. The same package includes CamTool, which features a dedicated ToF plugin to compute and display depth maps from the camera's phase data. The camera supports both free-running and triggered acquisition, including software or hardware edge and level triggers, as well as burst acquisition.

XIMEA has not announced pricing for this miniature IMX556 ToF sensor; it is currently listed as an engineering sample. Building a fully functional ToF system also requires the VCSEL-SLIM-W illumination board, control and data cables, and a Micro-B adapter; a USB hub, mounting bracket, and S-mount adapter are optional accessories.

XIMEA MU003TG-SY-UC Released: 0.3MP Modular USB 3.0 ToF Camera Based on Sony IMX556

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry