保时捷下一代车型“退回”一部分LCD!供应商已确定-车载显示-新闻-亚洲新能源汽车网Porsche's Next-Gen Models "Retreat" to Partial LCD Center Screens — Supplier Confirmed


AI free token/AI免费积分

本文来源:https://www.asianev.com/news/show-23366.html
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

保时捷正在和LG开发一块“不纯”的中控屏。
说它不纯,是因为这块屏幕同时用了OLED和LCD两种显示技术。LG电子牵头开发,LG Display供应面板,保时捷作为海外需求方参与了整个研发框架。
在OLED已经被公认为车载显示高端方案的今天,保时捷为什么要在下一代车型上“退回”一部分LCD?
因为一个功能:可变视角
保时捷提出的需求很具体:屏幕的可视方向要随座椅位置变化。
什么意思?驾驶员看屏幕时,看到的是导航和行车信息;副驾或乘客看同一块屏幕时,看到的是娱乐内容。两个人的视线角度不同,屏幕需要在不同角度呈现不同的画面。
这就是“可变视角”。它在LCD上已经是一项成熟技术——LCD的背光和液晶层结构天然支持通过视角控制来区分不同观看位置的内容。
但在OLED上,这项技术在2024年项目启动时还不成熟。行业人士的原话是:“当时存在加入可变视角功能的需求,但没有可用于OLED的技术,于是采用了LCD方案。”

所以保时捷的方案是:能上OLED的地方用OLED,需要可变视角的地方用LCD。 两块屏在中控台的不同区域分别布置,组合成一套CID系统。

保时捷下一代车型“退回”一部分LCD!供应商已确定-车载显示-新闻-亚洲新能源汽车网

如果只看参数,OLED在车载显示上的优势是压倒性的:自发光、完美黑、高对比度、可弯曲、更轻薄。LG Display的P-OLED已经用在保时捷Taycan的曲面屏上,双方的合作关系不是一天两天了。

但车载显示不是消费电子,功能需求优先于技术先进性。保时捷需要的不是一个“全OLED的漂亮方案”,而是一个能同时满足驾驶员信息显示和乘客观影需求的可量产方案。LCD的可变视角技术在当下是唯一能满足这个条件的。

LG方面也承认了这一点。行业人士的表述很直接:“如果该功能能在OLED上实现,将只采用OLED。” 这意味着LCD在这块屏上的角色是“过渡方案”——等到OLED的可变视角技术成熟,LCD就会被替换掉。

这个项目本身,比“OLED还是LCD”更值得关注
保时捷这块屏背后,是一个韩国国家级的研发项目:“面向自动驾驶与信息娱乐服务的大尺寸高曲率Head Unit CID开发”,周期从2024年7月到2028年12月。
LG电子主导的是第三子课题,范围涵盖:CID轻量化设计、大尺寸高带宽信号的集成控制器与软件、轻量化金属支架、视角控制LCD,以及完整CID系统的集成与装车验证。
简单说,LG不只是供一块屏,而是在交付一套完整的CID系统——从面板到控制器、从软件到结构件,全部打包。

LG Display提供面板(据称来自其中国法人),LG电子负责集成。这种“面板+系统集成”的分工模式,正在成为车载显示供应链的常态。面板厂提供显示核心,Tier1(这里是LG电子)负责把面板变成车企能直接装车的系统。

保时捷这个项目还有一个容易被忽略的细节:它发生在韩国产业通商资源部的国家级研发框架下。

保时捷作为“海外需求方”批准了这个项目,意味着一家德国跑车品牌,深度参与了韩国车载显示技术的研发路线定义。保时捷提出需求(可变视角),LG根据需求选择技术方案(OLED+LCD混合),韩国政府提供研发资金支持。
这种“海外车企提需求 + 韩国企业做集成 + 韩国政府出资金”的模式,反映的是车载显示供应链的全球化协作正在变得更深、更前置。车企不再只是“选供应商”,而是在定义技术路线。
保时捷这块“一半OLED、一半LCD”的中控屏,2028年底之前会完成开发和装车验证。它最终能不能量产,取决于LCD的可变视角方案能不能通过保时捷的耐久性测试,也取决于OLED的可变视角技术能不能在项目周期内追上来。
但无论结果如何,这个项目的存在本身已经说明了一件事:车载显示的竞争,正在从“谁的面板更好”转向“谁能把功能需求翻译成技术方案”。

Source: https://www.asianev.com/news/show-23366.html
For copyright issues, please email: 13951431913#139.com

Porsche is developing a "not-pure" center console screen with LG.
It is "not pure" because the screen uses both OLED and LCD display technologies. LG Electronics leads the development, LG Display supplies the panel, and Porsche participates in the entire R&D framework as the overseas demand party.
While OLED is already widely recognized as thein-car displaypremium solution today, why would Porsche "retreat" to partial LCD for its next-generation models?
Because of one feature: variable viewing angles
Porsche's requirement was very specific: the screen's viewing direction must change with the seat position.
What does that mean? When the driver looks at the screen, they see navigation and driving information; when the front passenger looks at the same screen, they see entertainment content. With different viewing angles, the screen must present different images at different angles.
This is "variable viewing angle". On LCD it is already a mature technology — the LCD backlight and liquid crystal layer structure naturally support distinguishing content for different viewing positions via viewing-angle control.
But on OLED, the technology was not yet mature when the project started in 2024. An industry source put it plainly: "There was a demand for the variable viewing-angle feature at the time, but no technology was available for OLED, so the LCD solution was adopted."

So Porsche's approach is: use OLED where possible, and use LCD where variable viewing angles are needed. The two screens are placed in different areas of the center console, combining into one CID system.

Porsche's Next-Gen Models

Looking only at the specs, OLED's advantage in automotive displays is overwhelming: self-emissive, perfect blacks, high contrast, bendable, thinner and lighter. LG Display's P-OLED is already used in the Porsche Taycan's curved screen — the partnership between the two sides is not new.

But automotive displays are not consumer electronics; functional requirements come before technical superiority. What Porsche needs is not a "pretty all-OLED solution", but amass-producible solution that satisfies both driver information display and passenger viewing needs. LCD's variable viewing-angle technology is currently the only thing that meets this condition.

LG acknowledged this point as well. An industry source stated directly: "If this feature could be implemented on OLED, only OLED would be used." This means LCD's role in this screen is a "transitional solution" — once OLED variable viewing-angle technology matures, LCD will be replaced.

The project itself is more noteworthy than "OLED vs LCD"
Behind Porsche's screen is a Korean national-level R&D project: "Large-size, high-curvature Head Unit CID development forautonomous drivingand infotainment services", running from July 2024 to December 2028.
LG Electronics leads the third sub-project, covering: CIDlightweightingdesign, integrated controllers and software for large-size high-bandwidth signals, lightweight metal brackets, viewing-angle-control LCD, plus integration and on-vehicle validation of the complete CID system.
Simply put, LG is not just supplying a screen — it is delivering a complete CID system: from panels to controllers, from software to structural parts, all packaged together.

LG Display provides the panels (reportedly from its Chinese subsidiary), and LG Electronics handles integration. This "panel + system integration" division of labor is becoming the norm in the automotive display supply chain. Panel makers provide the display core; the Tier 1 (here, LG Electronics) turns the panel into a system the automaker can install directly.

There is another easily overlooked detail in Porsche's project: it took place under the national-level R&D framework of Korea's Ministry of Trade, Industry and Energy.

Porsche approved the project as the "overseas demand party", meaning a German sports car brand participated deeply in defining the R&D roadmap of Korean automotive display technology. Porsche raised the requirements (variable viewing angles), LG chose the technical solution based on those requirements (a hybrid OLED+LCD), and the Korean government provided R&D funding.
This model of "overseas automaker raises requirements + Korean company integrates + Korean government funds" reflects that globalization in the automotive display supply chain is becoming deeper and more upstream. Automakers no longer just "select suppliers" — they define technology roadmaps.
Porsche's "half OLED, half LCD" center screen will complete development and on-vehicle validation by the end of 2028. Whether it eventually reaches mass production depends on whether the LCD variable viewing-angle solution passes Porsche's durability tests, and whether OLED variable viewing-angle technology can catch up within the project timeline.
But regardless of the outcome, the mere existence of this project shows one thing: competition in automotive displays is shifting from "whose panel is better" to "who can translate functional requirements into technical solutions".

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry