本文来源: https://www.cnx-software.com/2026/10/08/q8botone-a-palm-sized-open-source-quadruped-robot-with-esp32-c3-dynamixel-smart-actuators/ 若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
发布于 2026年10月8日 2026年10月8日 作者 Debashis Das - Q8botOne – 一款掌中大小的开源四足机器人,配备 ESP32-C3 和 DYNAMIXEL 智能执行器(众筹) 暂无评论
Q8botOne – 一款掌中大小的开源四足机器人,配备 ESP32-C3 和 DYNAMIXEL 智能执行器(众筹)
ZeroWire Robotics Q8botOne 是一款开源的掌中大小四足机器人,围绕 ESP32-C3 MCU 和 ROBOTIS DYNAMIXEL 智能执行器构建。采用独特的无线架构设计,机器人将所有组件集成到中央印刷电路板上,该电路板同时也用作结构底盘。
机器人大小大约相当于一部智能手机,能够慢跑、跳跃,并且能承载其自身 250 克重量的两倍。主 PCB 使用专用的 6V/16A 降压转换器供电给电机,并包含两节 14500 锂离子电池的电池管理系统。控制方面,套件包含一个独立的 ESP32-C3 控制器 PCB,配有 Adafruit Mini I2C 游戏手柄。

Q8botOne 规格:
CPU – 32位 RISC-V 单核处理器,最高频率 160 MHz
内存 – 400 KB SRAM(其中 16 KB 作为缓存),RTC 中 8 KB SRAM
存储 – 4 MB 内嵌闪存,384 KB ROM
连接性 – 2.4 GHz 802.11b/g/n Wi-Fi 4 1T1R,最高 150 Mbps & 蓝牙 LE 5.0
PCB 天线
视觉 – ESP32 摄像头模块,用于视觉反馈(可选)
传感器 – MPU-6050 6 轴 IMU(陀螺仪 + 加速度计),用于稳定和运动追踪(可选)
驱动 / 电机 – 8 个 ROBOTIS DYNAMIXEL XL330-M077-T 智能执行器(可通过共享串行总线单独寻址,具备可调位置、速度和 PID 增益)
USB – USB Type-C 接口,用于固件刷写、串行通信和电池充电
JST-SH 4 针传感器连接器(兼容 Qwiic / STEMMA QT)
JST-PH 4 针 UART 扩展连接器
通过 UART-to-TTL 半双工的 DYNAMIXEL 数据接口
SK6812 RGB发光二极管
机械底盘采用 MJF 打印的尼龙 PA12 框架及带有滚珠轴支撑关节的腿部连杆
无线设计(所有核心组件直接插入中央 PCB 骨干)
USB Type-C 接口用于充电
2 节 14500 锂离子电池(例如 KeepPower 14500)
BQ25887 2 节锂离子充电器,带电池均衡
INA228 20 位功率监测器(可选)
S-82C2A 2 节锂离子保护 IC
TPS543A26 6V、16A 降压转换器(用于 DYNAMIXEL 供电)
MPM3632C 5V、3A 降压稳压器(外围/MCU/摄像头供电)
带 MOSFET 开关的机械跳线
尺寸 – 120 x 70 x 70 毫米
重量 – ~221 至 250 克(根据传感器和相机负载略有变化)
Q8botOne 扩展选项,包含通过 Qwiic/STEMMA QT 的 MPU-6050 IMU 和 INA228 电源监控器,以及通过供电 UART 连接的 ESP32 摄像头,配有 Adafruit Mini I2C 游戏手柄和 USB-C 电源

该机器人配备一个以 ESP32-C3-MINI-1-N4 为核心的无线控制器,并带有一个 Adafruit Mini I2C 游戏手柄,带有摇杆和按钮。它可以通过 USB-C 使用手机、充电宝或墙式适配器供电,直接控制机器人。它通过 ESP-NOW 与机器人通信,当连接到 PC 时,同一控制器可用作无线适配器(dongle),让您通过桌面 GUI、Xbox 控制器或用于自定义应用的 API 操作机器人。该板还包含一个用于 I2C 扩展的 Qwiic/STEMMA QT 接口。
Q8botOne 机器人在 ESP32-C3 上运行开源固件。硬件设计文件(包括 Altium 原理图、Gerber 文件、BOM 和 3D CAD 模型),以及固件和 Python 控制软件,均可在 ZeroWire Robotics GitHub 仓库中获取。
Q8botOne 补充了紧凑型四足机器人列表,包括基于 ESP32 的 Hiwonder MechDog、Petoi Bittle X 或(较大的)基于 Raspberry Pi 4 的 Mini Pupper。与使用标准 PWM 伺服的 MechDog 和 Bittle X 相比,Q8botOne 使用支持位置和速度控制、关节反馈以及可调 PID 设置的 DYNAMIXEL 智能执行器。它的重量为 250 克,而 MechDog 为 560 克,且几乎没有电缆。
Q8botOne 机器人套件组件,包括主 PCB、3D 打印的底盘和腿部部件、控制器板、电池和装配硬件。DYNAMIXEL 执行器单独出售
Q8botOne 在 Crowd Supply 上提供,融资目标为 10,000 美元。基础 Q8botOne 机器人套件定价为 199 美元,但该等级不包含需要单独购买的八个 DYNAMIXEL 执行器。包含所有执行器和预编程板的完整组装版本售价为 599 美元。全球免费送货,预计将于 2027 年 3 月下旬开始交付。

Debashis Das
Debashis Das 是一名技术内容作家和嵌入式工程师,在行业内拥有超过五年的经验。他在嵌入式 C、PCB 设计和 SEO 优化方面具有专业知识,能够将复杂的技术主题以清晰的沟通方式有效结合。
分享此:
支持 CNX Software!通过加密货币捐款,成为 Patreon 的赞助者,或在 Amazon 或 AliExpress 购买商品。我们还在文章中使用联盟链接,如果您点击这些链接后进行购买,我们将获得佣金。


相关文章:
Husarion CORE2 STM32 机器人项目开发板,支持 ESP32、Raspberry Pi 3 或 ASUS Tinkerboard
myCobot Pro 600 基于 Raspberry Pi 4 的机械臂支持 600 毫米工作范围,最高可承受 2 公斤载荷
Petoi Quaddle – 适用于物理 AI 实验的迷你机器狗(众筹)
HealthyPi v4 可穿戴 WiFi 生命体征监测仪遵循 Raspberry Pi HAT 形态规格
E3K 一体化无线生物传感平台支持 EMG、ECG 和 EEG 传感器(众筹)
订阅
登录
0 条评论
最新

文章导航
上一篇 上一篇 Efinix Sapphire RV64 SoC – 可配置的 RISC-V 软核,带 DDR3、LPDDR4x 和 HyperRAM,适用于 Efinix FPGA
Facebook Twitter LinkedIn Telegram YouTube RSS

热门帖子 - 最近 7 天
ESP-SDR 固件将 ESP32 变成 2.4/5 GHz 软件定义无线电 (SDR) 15.9k 次浏览 | 6 条评论
Geekworm UPS Scap 5V5A – 一款适用于 Raspberry Pi 5 的超级电容 UPS HAT 6.1k 次浏览 | 6 条评论
DSPi 固件将 Raspberry Pi RP2040/RP2350 变成带内置 DSP 引擎的 USB 声卡 5.5k 次浏览 | 2 条评论
DEBIX M8391-01 工业单板计算机具备 MediaTek Genio 720 SoC,含 9 TOPS NPU,支持双显示 3.3k 次浏览 | 4 条评论
Avaota F2 – Allwinner V861 RISC-V 单板计算机面向具有 PTZ 和音频支持的 AI 摄像头 2.7k 次浏览 | 2 条评论
赞助商







最近的评论
Edric 在 ESP-SDR 固件将 ESP32 变成 2.4/5 GHz 软件定义无线电 (SDR) 上的评论
andelf 在 Efinix Sapphire RV64 SoC – 可配置的 RISC-V 软核,带 DDR3、LPDDR4x 和 HyperRAM,用于 Efinix FPGAs 上的评论
RK 在 DSPi 固件将 Raspberry Pi RP2040/RP2350 变成带内置 DSP 引擎的 USB 声卡 上的评论
Willy 在 DSPi 固件将 Raspberry Pi RP2040/RP2350 变成带内置 DSP 引擎的 USB 声卡 上的评论
AngryHacker 在 基于 Olimex LT8912B 的 MIPI-HDMI 适配器板 为 ESP32-P4-Devkit 添加 HDMI 输出 上的评论
订阅评论 RSS 源

最新评论
大家好,今天我将评测 UUNA TEK iAuto,这是一种旨在复 […] 的自动书写机器
去年八月,CNX Software 报道了 Elecrow ThinkNode M9 的发布,这是一个运行 […] 的独立 LoRa 终端
在第一次 […] 中拆箱和拆解 ACEMAGIC Kron Mini K5 硬件之后




本文来源:https://www.cnx-software.com/2026/10/08/q8botone-a-palm-sized-open-source-quadruped-robot-with-esp32-c3-dynamixel-smart-actuators/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Q8botOne – A palm-sized open-source quadruped robot with ESP32-C3, DYNAMIXEL smart actuators (Crowdfunding)
ZeroWire Robotics Q8botOne is an open-source, palm-sized quadruped robot built around an ESP32-C3 MCU and ROBOTIS DYNAMIXEL smart actuators. Designed with a unique wire-free architecture, the robot integrates all components onto a central printed circuit board also used as the structural chassis.
The robot is roughly the size of a smartphone and can jog, jump, and carry up to twice its 250-gram weight. The main PCB uses a dedicated 6V/16A step-down converter for motor power and includes a battery management system for two 14500 Li-ion cells. For control, the kit includes a separate ESP32-C3 controller PCB with an Adafruit Mini I2C Gamepad.
Q8botOne specifications:
- Wireless module – Espressif Systems ESP32-C3-MINI-1-N4 module with:
- ESP32-C3 (ESP32-C3FN4) SoC
- CPU – 32-bit RISC-V single-core processor up to 160 MHz
- Memory – 400 KB SRAM (16 KB for cache), 8 KB SRAM in RTC
- Storage – 4 MB embedded flash, 384 KB ROM
- Connectivity – 2.4 GHz 802.11b/g/n Wi-Fi 4 1T1R up to 150 Mbps & Bluetooth LE 5.0
- PCB antenna
- ESP32-C3 (ESP32-C3FN4) SoC
- Vision – ESP32 Camera module for visual feedback (Optional)
- Sensors – MPU-6050 6-axis IMU (Gyroscope + Accelerometer) for stabilization and motion tracking (Optional)
- Actuation / Motors – 8x ROBOTIS DYNAMIXEL XL330-M077-T smart actuators (individually addressable over a shared serial bus with tunable position, velocity, and PID gains)
- USB – USB Type-C port for firmware flashing, serial communication, and battery charging
- Expansion
- JST-SH 4-pin sensor connector (Qwiic / STEMMA QT compatible)
- JST-PH 4-pin UART expansion connector
- DYNAMIXEL data interface via UART-to-TTL half-duplex
- Misc
- SK6812 RGB LED
- Mechanical chassis with MJF-printed Nylon PA12 frames and leg linkages with ball-bearing-supported joints
- Wire-free design (all core components plug directly into the central PCB spine)
- Power
- USB Type-C port for charging
- 2x 14500 Li-ion batteries (e.g., KeepPower 14500)
- BQ25887 2-cell Li-ion charger with cell balancing
- INA228 20-bit power monitor (Optional)
- S-82C2A 2-cell Li-ion protection IC
- TPS543A26 6V, 16A step-down converter (DYNAMIXEL power)
- MPM3632C 5V, 3A step-down regulator (Peripheral/MCU/Camera power)
- Mechanical jumper with MOSFET power switching
- Dimensions – 120 x 70 x 70 mm
- Weight – ~221 to 250 grams (varies slightly depending on sensor and camera payload)


The robot is accompanied with a wireless controller built around ESP32-C3-MINI-1-N4 and an Adafruit Mini I2C Gamepad with a joystick and buttons. It can be powered via USB-C using a phone, power bank, or wall adapter to control the robot directly. It communicates with the robot via ESP-NOW, and when connected to a PC, the same controller works as a wireless dongle, letting you operate the robot through a desktop GUI, an Xbox controller, or an API for custom applications. The board also includes a Qwiic/STEMMA QT connector for I2C expansion.
The Q8botOne robot runs open-source firmware on the ESP32-C3. The hardware design files, including Altium schematics, Gerber files, BOM, and 3D CAD models, along with the firmware and Python control software, are available on the ZeroWire Robotics GitHub repositories.
The Q8botOne adds to a list of compact quadruped robots, including the ESP32-based Hiwonder MechDog, Petoi Bittle X, or (the larger) Raspberry Pi 4-based Mini Pupper. Compared to the MechDog and Bittle X, which use standard PWM servos, the Q8botOne uses DYNAMIXEL smart actuators that support position and velocity control, joint feedback, and adjustable PID settings. It weighs 250 grams, compared to 560 grams for the MechDog, and features almost no cables.

The Q8botOne is available on Crowd Supply with a $10,000 funding goal. The barebones Q8botOne Robot Kit is priced at $199, but this tier does not include the eight DYNAMIXEL actuators, which you must purchase separately. A fully assembled version that includes all actuators and pre-programmed boards costs $599. Shipping is free worldwide, and deliveries are expected to begin in late March 2027.

Debashis Das is a technical content writer and embedded engineer with over five years of experience in the industry. With expertise in Embedded C, PCB Design, and SEO optimization, he effectively blends difficult technical topics with clear communication
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.