本文来源: https://www.cnx-software.com/2026/10/08/efinix-sapphire-rv64-soc-configurable-risc-v-soft-cores-with-ddr3-lpddr4x-and-hyperram-for-efinix-fpgas/ 若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
发布于 October 8, 2026 October 7, 2026 由 Debashis Das - 1 条评论 关于 Efinix Sapphire RV64 SoC – 可配置的 RISC-V 软核,带 DDR3, LPDDR4x, 和 HyperRAM,适用于 Efinix FPGAs
Efinix Sapphire RV64 SoC – 可配置的 RISC-V 软核,带 DDR3, LPDDR4x, 和 HyperRAM,适用于 Efinix FPGAs
Efinix 已推出 Sapphire RV64 SoC,一种可配置的 64 位 RISC-V 软核处理器,专为其 Titanium 和 Trion FPGAs 设计。它基于 VexiiRiscv 核心,可配置为一至四个 RISC-V 核心,运行频率最高可达 400 MHz。
Sapphire RV64 具有七级流水线,可配置的 L1 缓存,可选 64–512 KB L2 缓存,以及 4–512 KB 片上 RAM。它支持 DDR3、LPDDR4x 和 HyperRAM,最高可达 512 位 AXI 接口,外部内存范围为 4 MB 至 8 GB。其他特性包括可选的 FPU、分支预测器、预取器、SV39 MMU,最高可达 32 个 GPIOs,五个 I²C,三个 SPI,三个 UARTs,定时器、看门狗,以及最高可达八个用户中断。

Efinix Sapphire RV64 SoC 规格:
1 至 4x VexiiRiscv 64 位核心,具有 7 级流水线(取指、对齐-解压、解码、发布、执行、内存、写回)
可配置的系统时钟频率从 20 MHz 至 400 MHz
支持 RV64IMACFD_Zba_Zbc_Zbs 扩展(包括单精度和双精度浮点、原子操作、压缩、位操作和缓存块管理)
可选的 SV39 内存管理单元(MMU),用于 Linux 支持
可选的物理内存保护(PMP)单元,粒度为 4 KB
L1 缓存 – 可配置的多路指令和数据缓存(最高 8 路,每路 4 KB)
L2 缓存 – 可选的共享 8 路 L2 缓存,范围从 64 KB 至 512 KB
片上 RAM – 4 KB 至 512 KB,内置用于 SPI flash 的引导加载程序
DDR3 最高 400 MHz / 800 Mbps
LPDDR4x 最高 1,600 MHz / 3,200 Mbps
HyperRAM 最高 250 MHz / 500 Mbps
支持 4 MB 至 8 GB
最高 32x GPIOs
最高 5x I2C 主机和最高 3x SPI 主机
最高 3x UARTs(波特率为 115,200)
1x AXI4 主通道 和最高 5x APB3 从接口,用于自定义用户外设
标准 RISC-V 调试
最高 4x 硬件断点
最高 4x 性能计数器(用户指南也列出 1 至 9)
可选的与 FPGA 调试器共同调试
最高 8x 用户中断
3x 用户定时器
看门狗定时器
动态分支预测器
软件和硬件预取器
包含 1,024 个 ID 的自定义指令接口
功耗 – 取决于 FPGA、时钟速度和已启用的功能
Efinix Sapphire RV64 SoC 软件和硬件开发工作流程
Efinity IP Manager 允许您配置 SoC 并生成自定义 IP 核。针对固件,Efinity RISC-V 嵌入式软件 IDE 提供了基于 Eclipse 的 C/C++ 开发和调试环境。
Efinity RISC-V 嵌入式软件 IDE
根据配置,SoC 可直接从 SPI flash 设备启动到片上 RAM,或在执行前将更大的用户应用程序复制到外部内存。多核配置采用对称多处理(SMP),在所有处理器之间共享工作负载以提升整体系统吞吐量。
Titanium Ti375 C529 资源利用率和性能 Topaz Tz170 J484 资源利用率和性能 Trion T120 F324 资源利用率和性能


我们之前曾报道过 Efinix 首款面向 Trion FPGA 的 RISC-V 软核 SoC —— Ruby、Jade 和 Opal 内核,这些是基于 VexRiscv 的 32 位设计。随后,公司将该理念迁移到硅上:Titanium 推出了基于 Sapphire 软核的四核 32 位 RISC-V 块,而 Topaz 系列则在成本更低的 16 nm FPGA 上提供了相同类型的块。他们还推出了 Topaz Tz170b 开发套件和更新的 Titanium Edge,这些是运行这些内核的开发板和芯片。Sapphire RV64 是此软核的后续版本:64 位,仍然构建在 FPGA 结构中,旨在满足已经超越那些 32 位内核需求的设计。
Sapphire RV64 SoC 可在 Efinity IP Manager 中获得,适用于所有 Titanium 和 Topaz FPGA 以及 T20 及以上的 Trion 器件。它需要 Efinity 2026.1 或更高版本,且 Efinix 提供免费的 Efinity 软件许可证。更多详情可在支持页面(包含数据手册和用户指南的链接)以及新闻稿中获取。

德巴希斯·达斯
Debashis Das 是一名技术内容作家和嵌入式工程师,在行业内拥有超过五年的经验。他精通嵌入式 C、PCB 设计和 SEO 优化,能够将复杂的技术主题与清晰的沟通有效结合。
分享此内容:
支持 CNX Software!通过加密货币捐赠,成为 Patreon 上的赞助者,或在 Amazon 或 Aliexpress 购买商品。我们还在文章中使用关联链接,如果您点击这些链接后进行购买,我们可获得佣金。


相关文章:
SiFive 发布 32 位 E31 Coreplex 及 64 位 E51 Coreplex RISC-V 处理器,公布价格
MicroSemi 推出 PolarFire FPGA 及 RISC-V SoC
zGlue 发布开放式 Chiplet 倡议,与 Google 和 Antmicro 合作
Efinix Titanium Ti375 FPGA 提供四核硬化 RISC-V 块、PCIe Gen 4 和 10GbE
Efinix 推出低功耗 Topaz RISC-V SoC FPGA 系列,用于“大批量、大众市场”应用
订阅
登录
1 条评论
最新
安德尔夫
12小时前
从单核到四核 400MHz 和慢速 RAM 用于 Linux?我想知道你会在这种平台上做什么……可能会使用外部加速器或协处理器……虽然在相对较新的生产节点上功耗必须很低。
回复

文章导航
上一篇文章 上一篇文章 DSPi 固件将 Raspberry Pi RP2040/RP2350 转换为带载板 DSP 引擎的 USB 声卡
下一篇文章 下一篇文章 Q8botOne – 一款掌心大小的开源四足机器人,配备 ESP32-C3、DYNAMIXEL 智能执行器(众筹)
Facebook Twitter LinkedIn Telegram YouTube RSS

热门文章 - 最近 7 天
ESP-SDR 固件将 ESP32 转变为 2.4/5 GHz 软件定义无线电(SDR) 15.9k 次浏览 | 6 条评论
Geekworm UPS Scap 5V5A – 一种适用于 Raspberry Pi 5 的超级电容器 UPS HAT 6.1k 次浏览 | 6 条评论
DSPi 固件将 Raspberry Pi RP2040/RP2350 转换为带载板 DSP 引擎的 USB 声卡 5.5k 次浏览 | 2 条评论
DEBIX M8391-01 工业 SBC 配备 MediaTek Genio 720 SoC,具备 9 TOPS NPU,支持双显示 3.3k 次浏览 | 4 条评论
Avaota F2 – Allwinner V861 RISC-V SBC 瞄准带有 PTZ 和音频支持的 AI 摄像头 2.7k 次浏览 | 2 条评论
赞助商







最近评论
Edric 在 ESP-SDR 固件将 ESP32 转变为 2.4/5 GHz 软件定义无线电(SDR)
andelf 在 Efinix Sapphire RV64 SoC – 可配置的 RISC-V 软核,带 DDR3、LPDDR4x 和 HyperRAM,适用于 Efinix FPGAs
RK 在 DSPi 固件将 Raspberry Pi RP2040/RP2350 转换为带载板 DSP 引擎的 USB 声卡
Willy 在 DSPi 固件将 Raspberry Pi RP2040/RP2350 转换为带载板 DSP 引擎的 USB 声卡
AngryHacker 在基于 Olimex LT8912B 的 MIPI-HDMI 适配器板为 ESP32-P4-Devkit 添加 HDMI 输出
订阅评论 RSS feed

最新评测
大家好,今天我将评测 UUNA TEK iAuto,这是一种旨在复 […] 的自动书写机器。
去年八月,CNX Software 报道了 Elecrow ThinkNode M9 的发布,这是一款独立的 LoRa 终端,运行 […] )
在首次拆箱和拆解 ACEMAGIC Kron Mini K5 硬件之后 […]




本文来源:https://www.cnx-software.com/2026/10/08/efinix-sapphire-rv64-soc-configurable-risc-v-soft-cores-with-ddr3-lpddr4x-and-hyperram-for-efinix-fpgas/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Efinix Sapphire RV64 SoC – Configurable RISC-V soft-cores with DDR3, LPDDR4x, and HyperRAM for Efinix FPGAs
Efinix has introduced the Sapphire RV64 SoC, a configurable 64-bit RISC-V soft-core processor designed for its Titanium and Trion FPGAs. It is based on the VexiiRiscv core and can be configured with one to four RISC-V cores running at up to 400 MHz.
The Sapphire RV64 has a seven-stage pipeline, configurable L1 caches, optional 64–512 KB L2 cache, and 4–512 KB of on-chip RAM. It supports DDR3, LPDDR4x, and HyperRAM with up to 512-bit AXI interfaces and external memory from 4 MB to 8 GB. Other features include an optional FPU, branch predictor, prefetchers, SV39 MMU, up to 32 GPIOs, five I²C, three SPI, three UARTs, timers, watchdog, and up to eight user interrupts.
Efinix Sapphire RV64 SoC specifications:
- CPU
- 1 to 4x VexiiRiscv 64-bit cores with a 7-stage pipeline (fetch, align-decompress, decode, issue, execute, memory, and writeback)
- Configurable system clock frequency from 20 MHz to 400 MHz
- Supports RV64IMACFD_Zba_Zbc_Zbs extensions (including single- and double-precision floating-point, atomic, compressed, bit manipulation, and cache block management)
- Optional SV39 Memory Management Unit (MMU) for Linux support
- Optional Physical Memory Protection (PMP) unit with 4 KB granularity
- L1 Cache – Configurable multi-way instruction and data cache (up to 8 ways, 4 KB per way)
- L2 Cache – Optional shared 8-way L2 cache ranging from 64 KB up to 512 KB
- Memory
- On-chip RAM – 4 KB to 512 KB with a built-in boot loader for SPI flash
- External Memory (via half-duplex AXI3 or full-duplex AXI4 interface)
- DDR3 up to 400 MHz / 800 Mbps
- LPDDR4x up to 1,600 MHz / 3,200 Mbps
- HyperRAM up to 250 MHz / 500 Mbps
- Supports from 4 MB to 8 GB
- I/O
- Up to 32x GPIOs
- Up to 5x I2C masters and up to 3x SPI masters
- Up to 3x UARTs (running at 115,200 baud rate)
- 1x AXI4 master channel and up to 5x APB3 slave interfaces for custom user peripherals
- Debug
- Standard RISC-V debug
- Up to 4x hardware breakpoints
- Up to 4x performance counters (the user guide also lists 1 to 9)
- Optional co-debug with the FPGA debugger
- Misc
- Up to 8x user interrupts
- 3x user timers
- Watchdog timer
- Dynamic branch predictor
- Software and hardware prefetchers
- Custom instruction interface with 1,024 IDs
- Power – Varies depending on the FPGA, clock speed, and enabled features

The Efinity IP Manager lets you configure the SoC and generate a custom IP core. For firmware, Efinity RISC-V Embedded Software IDE provides an Eclipse-based environment for C/C++ development and debugging.

Depending on the configuration, the SoC can boot from an SPI flash device directly into the on-chip RAM or copy a larger user application into external memory before execution. Multi-core configurations utilize symmetric multi-processing (SMP), sharing the workload across all processors to improve overall system throughput.



We wrote about Efinix’s first RISC-V soft SoCs for Trion FPGAs, the Ruby, Jade, and Opal cores, 32-bit designs based on VexRiscv. After that, the company moved the idea into hard silicon: Titanium introduced a quad-core 32-bit RISC-V block based on the Sapphire soft core, and the Topaz family had the same kind of block on a lower-cost 16 nm FPGA. They also introduced the Topaz Tz170b devkit and the newer Titanium Edge, which were the boards and chips those cores run on. Sapphire RV64 is the soft-core follow-up: 64-bit, still built in the FPGA fabric, and aimed at designs that have outgrown those 32-bit cores.
The Sapphire RV64 SoC is available in the Efinity IP Manager for all Titanium and Topaz FPGAs and Trion devices from T20 and above. It requires Efinity 2026.1 or newer, and Efinix provides free Efinity software licenses. More details are available on the support page (with links to a datasheet and a user guide) and in the press release.

Debashis Das is a technical content writer and embedded engineer with over five years of experience in the industry. With expertise in Embedded C, PCB Design, and SEO optimization, he effectively blends difficult technical topics with clear communication
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.
Single till Quad core 400MHz and slow ram for Linux? I wonder what you’d do with a platform like this.. probably something with external accelerators or co-processors… Must be very low power on a relatively recent production node, though