IT之家 10 月 8 日消息,据界面新闻报道,10 月 8 日,懂车帝实测曝出尊界 V800 三次浮现刹车踏板支架断裂,部分网友称节目内容系极端工况,驾驶员脚踩刹车踏板力度过大。懂车帝有关人员表示,百公里刹车实验并非极端工况,很多人在高速驾驶情形下都会遇到,是汽车实测最基本的科目之一。本次节目中浮现的相关车型制动踏板支架断裂属首次浮现,且连续三次实验在同一位置浮现相似断裂现象,存在一定安全隐患。
针对三辆测试车刹车踏板支架断裂时表明的踏板力,懂车帝维度表示,网传暴力测试并不存在,而是正常的刹车踏板大力制动。网友关注的“4589N”踏板力数值,实为高速摄像机拍摄实验画面时,因摄像机与检测设备的液晶屏刷新帧率不同,拍摄到的液晶屏数字跳动浮现残影,真实峰值数据为 1612N,踏板力在达到峰值后迅速下降,但“4589N”被截图并形成谣言。
今日早些时候,懂车帝实测 3 台尊界 V800,称在 100km/h-0 紧急制动时刹车踏板支架被踩断,引发网络热议。对此,尊界汽车官方今晚发布了关于尊界汽车制动踏板支架底座相关难题的情况说明。
IT之家附尊界汽车说明原文如下:
关于尊界汽车制动踏板支架底座相关难题的情况说明
制动平台直接关系使用者的出行安全,笔者高度重视相关视频引发的关切。
尊界汽车的制动平台,按照高于国家标准(GB 21670‑2025 / GB 7258‑2026)、高于行业标准(QC/T 788‑2018)的要求完成全流程开发与验证。自首批车辆交付以来,在使用者实际使用情形中,未发生制动踏板支架底座断裂故障。
使用者安全永远是笔者的第一优先级。即便是非标准的极端测试工况,笔者仍希望为使用者给出更高的安全冗余:笔者将进一步优化该部件外观,并为已交付使用者给出免费升级挑选。
同时,笔者将对相关部件的外观验证、试验边界与生产质量管理开展平台性复核与补强,持续完善笔者的安全体系。感谢广大使用者对尊界汽车的关注与监督。
尊界汽车
2026 年 10 月 8 日
相关阅读:
本文来源:https://www.ithome.com/1/010/721.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
According to Jiemian News, after Dongchedi's test showed the brake pedal bracket of the Zunjie V800 fracturing three times, some netizens claimed the program used extreme conditions with excessive pedal force. Dongchedi staff responded that a 100-0km/h braking test is not an extreme condition.
They noted that many people encounter such braking on highways and that it is one of the most basic vehicle test items. The brake pedal bracket fractures seen in this program occurred for the first time, and similar fractures appeared at the same position across three consecutive tests, indicating a potential safety hazard.

Regarding the pedal force figure of "4589N" that drew attention, Dongchedi explained it was an artifact: when a high-speed camera filmed the instrument screen, the difference in refresh rates between the camera and the test equipment produced a ghosted, jumping number.
