Sipeed SLogic32U3 众筹:号称全球首款 10Gbps USB 3.2 逻辑分析仪Sipeed SLogic32U3 - A high-speed 10 Gbps USB 3.2 logic analyzer (Crowdfunding)


AI free token/AI免费积分
Sipeed SLogic32U3 众筹:号称全球首款 10Gbps USB 3.2 逻辑分析仪

Sipeed 刚刚推出了他们称为全球首款 10Gbps USB 3.2 逻辑分析仪的 SLogic32U3。该产品是 2025 年推出的 3.2Gbps 逻辑分析仪 SLogic16U3 的继任者。

SLogic32U3 采用 USB-C 接口,通过四个 mini HDMI 接口支持最多 32 个通道,信号带宽 350MHz;四通道时每通道采样率最高 1400MS/s,32 通道全开时为每通道 200MS/s,并可选配 ADC 模块。

机身小巧无风扇,共五个接口:四个用于输入信号的 mini HDMI 端口,以及一个连接主机的 USB-C 3.2 口。

Sipeed 表示 SLogic32U3 支持 Windows 10/11 64 位、Linux 64 位 x86、macOS(Apple Silicon)与 Android(浏览器)。大多数用户会使用 Sipeed 自研的 SLogicView 软件,不过该逻辑分析仪同时兼容 ngscopeclient、sigrok-cli/Pulseview、SLogicWeb 以及 ALL LOGIC 社区应用。除网页版 SLogicView 外,各版本下载链接均可在 GitHub 找到,详细的软硬件文档则发布在 wiki 上。

在预热数月之后,Sipeed 已在 Kickstarter 正式上线 SLogic32U3,众筹目标为 5 万港币(约 6400 美元),上线数小时即已达成。早鸟价 129 美元起,运费根据目的国不同需另加 60 至 140 港币。若一切顺利,支持者预计可在 2026 年 11 月底前收到产品。

本文来源:https://www.cnx-software.com/2026/10/09/sipeed-slogic32u3-high-speed-10-gbps-usb-3-2-logic-analyzer/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Sipeed has just launched what they claim is the world’s first 10 Gbps USB 3.2 logic analyzer. The SLogic32U3 is the successor to the SLogic16U3 3.2 Gbps logic analyzer launched in 2025.

The SLogic32U3 USB-C logic analyzer supports up to 32 channels via four mini HDMI connectors, 350 MHz signal bandwidth, up to 1400 MS/s per channel with four channels, or 200 MS/s per channel with 32 channels, and is offered with an optional ADC module.

SLogic32U3 connected to a Raspberry Pi’s GPIO headers and a USB-C host (laptop) running SLogicView

Sipeed SLogic32U3 is a small fanless device with five connectors: four mini HDMI ports for input signals, and a USB-C 3.2 port connected to the host

Sipeed SLogic32U3 - A high-speed 10 Gbps USB 3.2 logic analyzer (Crowdfunding)

Sipeed says the SLogic32U3 works on Windows 10/11 64-bit, Linux 64-bit x86, macOS (Apple Silicon), and Android (browser). Most people will likely use the SLogicView software developed by Sipeed, but the logic analyzer is also compatible with ngscopeclient, sigrok-cli/Pulseview, SLogicWeb, and the ALL LOGIC community app. You’ll find download links for all variants on GitHub , except for the web version of SLogicView .

You’ll find detailed hardware and software documentation on the wiki .

After teasing it for several months, Sipeed has just launched the SLogic32U3 USB 3.2 logic analyzer on Kickstarter with a 50,000 HKD (~$6400 US) funding target that has been surpassed after a couple of hours. Rewards start at $129 for an early bird SLogic32U3 device. Shipping adds 60 to 140 HKD depending on the destination country. Backers should expect their perks to ship by the end of November 2026 if everything goes according to plan.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry