
飞行和驾驶模拟器的造价可以高到令人咋舌,到了某个阶段,买一架真飞机或一辆赛车可能比不断升级模拟设备还要便宜。但与此同时,这也可以是一项相当亲民的爱好,入门级组件的价格对许多人来说完全负担得起。如果部分零件能够自行采购,并且手边有一台3D打印机,成本还可以进一步大幅降低。[Jason]正在展示他所打造的最低成本H型换挡器之一,其核心仅由两个部件构成。
这两个部件仅涵盖了整个装置的电子部分,但已经基本解决了换挡器所需的全部功能。一个类似于许多游戏手柄中使用的摇杆与一块Arduino Pro Micro开发板搭配,两者之间的接线方式非常简单直观。这些电子部件配合一个3D打印的原型外壳和换挡手柄,呈现出所需的H型换挡布局。接下来只需上传一些现成的固件即可,[Jason]也对此进行了演示,该固件支持多种不同的换挡器配置方案。
虽然这只是一个原型,但它充分展示了仅凭几件现成组件加上一台3D打印机,就能为经济型驾驶模拟设备带来怎样的效果。事实上,3D打印机也并非不可或缺,例如这套三踏板装置就以铝型材框架作为底座。在此基础上,还可以添加各种其他功能,比如方向盘力反馈等。
本文来源:https://hackaday.com/2026/10/09/two-component-h-shifter-for-racing-sims/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Flying and driving simulators can go as far as money will take you, and at some point it might end up being cheaper to buy a plane or race car than to keep adding capabilities to some of the sim rigs we’ve seen. But it can also be a fairly affordable hobby as well, with entry-level components being within reach for many. The price can drop precipitously from there too, provided some parts can be sourced and a 3D printer is made available, and [Jason] is demonstrating one of the lowest-cost H-shifters we’ve seen which only uses two parts at its core .
The two components only cover the electronics for the build, but this gets almost everything needed for the shifter squared away. A joystick like those found inside many game controllers is paired with an Arduino Pro Micro, with a very straightforward wiring configuration between them. These components are paired with a prototype 3D printed case and shift knob which provides the H pattern of choice. From there it’s as simple as uploading some readily-available firmware, which [Jason] also demonstrates, and which has many options for various configurations of shifters.

Although this was just a prototype, it shows was just a few off-the-shelf components and a 3D printer can provide to an affordable driving sim setup. Even then a 3D printer is not always necessary, like this three-pedal setup using extruded aluminum frame as a base . From there, all kinds of other features can be added like force feedback on the steering wheel .