用旧搅拌机和废料箱零件自制皮带锉Belt File From Old Mixer And Junk Bin Parts


AI free token/AI免费积分
用旧搅拌机和废料箱零件自制皮带锉

自制电动工具是升级改造废旧零件的一种有成就感的方式,[bluesyann] 正是如此,用一台旧搅拌机制作了一把带式砂光锉。我们喜欢的是,旧搅拌机的外壳被保留下来并作为手柄,因此无需单独考虑电机安装和接线。它看起来完全可用,所需硬件都是废料堆里常见的东西。

[bluesyann] 将砂带张紧在安装在搅拌机电机上的3D打印滑轮与嵌入铝制U形槽末端的轴承之间。其余组件由废旧木料和嵌套U形槽构成,甚至还有一根由螺纹杆制成的张紧调节装置。

作者提供了材料清单和滑轮3D模型,但这类项目更多是分享总体思路,而非精确设计。每当人们改装或将现有设备(本例中的搅拌机)整合到项目中时,大部分工作都是围绕无法更改的部分进行适配。

可在下方嵌入的短视频中观看其实际运行效果。如果你喜欢这个想法,却没有 [bluesyann] 使用的同款搅拌机,我们可以推荐一款类似的DIY附件,让你用常见的角磨机达到类似效果。

本文来源:https://hackaday.com/2026/10/09/belt-file-from-old-mixer-and-junk-bin-parts/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Making one’s own power tools can be a rewarding way to upcycle parts, and [bluesyann] does exactly that with a belt file made from an old mixer . We like how the enclosure for the old mixer is preserved and acts as a handle, so there’s no need to worry about motor mounting and wiring separately. It looks perfectly usable, and all the hardware needed is the sort of thing one finds in a scrap pile.

[bluesyann] stretches the sanding belt between a 3D printed pulley attached to the mixer motor, and a bearing fitted into the end of some aluminum U-channel. Scrap wood and more nested U-channel make up the rest of the assembly, and there’s even a tension adjustment made from a threaded rod.

There’s a bill of materials and a 3D model for the pulley, but a build like this is more about sharing the broad strokes rather than the exact design. Whenever one modifies or integrates an existing piece of equipment (the mixer, in this case) into a project, most of the work is about working with and around the bits one can’t change.

Belt File From Old Mixer And Junk Bin Parts

Watch it in action in a brief video, embedded just below. If you like the idea but don’t have a mixer like the one [bluesyann] used, let us point you toward a similar DIY attachment to get a similar result from a common angle grinder .

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry