低电流密度镀镍Low Current Density Nickel Plating


AI free token/AI免费积分
低电流密度镀镍

我们往往觉得电镀就像制作电路板或焊接贴片芯片一样,在动手之前看似繁琐,完成后却记不清当初为何把它想得那么复杂。[Kovancapol] 希望向大家展示如何为工具镀上一层镜面镍。虽然准备工作看起来不少,但我们猜测,一旦所有东西都备齐,操作就会变得轻松起来。

由于涉及硫酸镍和氯化镍等试剂,难免需要做一些化学准备;此外还需要玻璃器皿、镍阳极和电源。正如视频所示,最终效果相当漂亮。我们不禁好奇,这一工艺还能有哪些其他用途。

在 3D 打印件上制作导电涂层或许具有可行性。不过,我们不确定在 PCB 走线上进行焊接是否值得,因为镍一旦氧化就会变得难以焊接。通过不同镀层的组合搭配,往往能取得相当惊艳的效果。

本文来源:https://hackaday.com/2026/10/08/low-current-density-nickel-plating/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

We imagine that electroplating is like making PC boards or soldering surface-mount chips. Before you’ve done it, it seems like a lot. Afterward, you can’t remember why it was such a big deal. [Kovancapol] wants to show you how to plate a mirror-finish nickel over your tools , and while it looks like a lot to set up, we are guessing that it gets easy once you have everything together.

There is a bit of chemical setup, as you might expect with reagents like nickel sulfate and nickel chloride. Then there’s the glassware, nickel anodes, and a power supply. As you can see in the video, the results look very nice. We can’t help but wonder what other uses you might have for this process.

Low Current Density Nickel Plating

A conductive coating on a 3D print might be feasible . We aren’t sure soldering PCB traces would be worth it since nickel gets hard to solder as it oxidizes. You can mix and match plating for some pretty impressive results.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry