本文来源:https://mp.weixin.qq.com/s/YKCm_9xdjLorbTmNAqZuQQ
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
一张电子纸价签,售价不变时,显示屏保持画面无需持续供电。但门店改价要通信和刷新,拣货可能用提示灯找货位,定位能力也要运行。要判断室内光伏能分担多少电,先得知道门店准备让这排货架做多少事。
2024年12月,HIS、罗森与Saule在东京Green Lawson启动试点,用薄膜钙钛矿电池为电子价签供电,店内照明兼容远程更新商品信息。公告能确认思路进了店,却没有给出不同货位的长期供电余量、故障和维护记录。它回答了“能不能用”,还没回答“忙起来够不够用”。
光伏片和电池,摆在哪儿

另一种做法是把采光单元放在货架轨道。Vusion与Exeger合作的EdgeSense使用Powerfoyle,它属于染料敏化光伏路线。室内光转成的电存进轨道里的可充电电池,再由轨道向表明端供电。2025年大阪世博会的两家7-Eleven概念店使用了这套平台。
这里的“价签免电池”,指每枚表明端不再各装一颗纽扣电池;轨道仍要储能,关灯或采光被商品挡住时靠它供电。维护工作于是从逐枚价签转向整条轨道。两家概念店的展示,还回答不了普通门店几年后的维护量。
汉朔2026年9月发布的Nebular Lux走的是第三条路:保留电池,用室内光补电。公司明确把新增电量用于更频繁的货位定位和更长时间的LED提示,而不只为延长静态表明。它也没有公布与前两种思路在同一门店条件下的对照结果。
三个思路把采光和储能放在不同位置。若采光单元跟着价签走,每个低照货位都要单独过关;采光集中在轨道上,须同时算轨道安装和储能维护;保留电池的思路,则要看补进去的电能否减少更换次数,又不影响高频任务。只问哪种光伏材料效率高,比较的还不是门店最终买到的能力。
先固定任务,再比供电
同一家门店里,一排价签只偶尔改价,和促销时反复刷新、持续亮灯,是两份用电任务。测试时应把货位照度、营业与关灯时长、每天改价次数、定位和亮灯频次都记下来,再看最暗货位的更新成功率、储能余量,以及员工每月处理了多少次供电故障。
这组记录可以放到同一张表里比较,供应商材料效率却不能代替它。现有公开资料还没有给出钙钛矿价签、染料敏化光伏轨道和光补电池思路在同一门店、同一任务下的长期对照。门店若只需要稳定表明售价,与还要频繁定位、亮灯的门店,选出的供电结构可能不同。
资料来源:E Ink电子纸工艺说明;HIS × 罗森钙钛矿价签试点;Exeger Powerfoyle工艺介绍;Vusion × Exeger供电思路说明;大阪世博会7-Eleven概念店公告;汉朔Nebular Lux公告。
An e-paper shelf label needs no continuous power to hold its display when the price stays unchanged. But updating prices in store requires communication and a refresh, picking may use indicator lights to locate slots, and the positioning capability also consumes power. To judge how much electricity indoor photovoltaics can offset, you first need to know how much work the store intends to assign to that shelf.
In December 2024, HIS, Lawson and Saule launched a pilot at a Green Lawson store in Tokyo, powering e-paper shelf labels with thin-film perovskite cells, with in-store lighting compatible with remote product-information updates. The announcement confirms the concept reached the store, yet provides no long-term records of power margin, failures or maintenance across different slots. It answers "can it work", but not yet "is it enough when busy".
Where to put the PV cells and batteries
Another approach places the light-harvesting unit on the shelf rail. EdgeSense, a collaboration between Vusion and Exeger, uses Powerfoyle, which follows the dye-sensitized photovoltaic route. Electricity from indoor light is stored in a rechargeable battery inside the rail, which then powers the label end. Two 7-Eleven concept stores at Expo 2025 Osaka adopted this platform.
The "battery-free label" here means each label end no longer carries its own button cell; the rail still stores energy and supplies power when lights are off or harvesting is blocked by merchandise. Maintenance thus shifts from individual labels to the whole rail. The two concept stores' demos cannot yet answer the maintenance load of an ordinary store years later.
Hanshow's Nebular Lux, released in September 2026, takes a third path: it keeps the battery and tops it up with indoor light. The company explicitly directs the added energy to more frequent slot positioning and longer LED prompts, not merely to extend static display. It has also not published a comparison with the other two approaches under the same in-store conditions.
The three approaches place light harvesting and energy storage in different spots. If the harvesting unit travels with the label, every low-light slot must pass on its own; concentrating harvesting on the rail means accounting for both rail installation and storage maintenance; the keep-the-battery approach depends on whether the topped-up energy reduces replacement frequency without hurting high-frequency tasks. Asking merely which PV material is more efficient does not yet compare the capability the store ultimately buys.
Fix the task first, then compare power supply
Within the same store, a row of labels that only changes prices occasionally, versus repeated refreshes and continuous lighting during promotions, are two different power tasks. Tests should log slot illuminance, business and lights-off hours, daily price-change count, and positioning and lighting frequency, then look at the update success rate of the darkest slot, the energy-storage margin, and how many power-supply failures staff handled per month.
This set of records can be compared in one table, but supplier material efficiency cannot replace it. Public information so far offers no long-term comparison of perovskite labels, dye-sensitized PV rails and light-top-up batteries under the same store and same task. A store that only needs a stable price display, versus one that also requires frequent positioning and lighting, may end up with different power structures.
Sources: E Ink e-paper process notes; HIS x Lawson perovskite label pilot; Exeger Powerfoyle process introduction; Vusion x Exeger power-supply approach notes; Expo 2025 Osaka 7-Eleven concept-store announcement; Hanshow Nebular Lux announcement.