Wireless-Tag WT32P4C5-43S:内置 4.3 英寸触摸屏的 ESP32-P4 + ESP32-C5 开发板Wireless-Tag WT32P4C5-43S – A fully integrated 4.3-inch ESP32-P4 and ESP32-C5 touch display devkit


AI free token/AI免费积分
Wireless-Tag WT32P4C5-43S:内置 4.3 英寸触摸屏的 ESP32-P4 + ESP32-C5 开发板

Wireless-Tag WT32P4C5-43S(ZX4D30CE405-V1.3)是一块高度集成的 4.3 英寸触摸显示开发板,将 ESP32-P4 微控制器与支持双频 Wi-Fi 6(2.4/5GHz)、低功耗蓝牙和 802.15.4 连接的 ESP32-C5 无线模块组合在一起。与此前的 ESP32-P4 + ESP32-C5 方案不同,这块板子自带触摸屏,无需再外接显示器。

该板面向工业自动化、智能控制面板和边缘 AI 视觉终端设计,还集成了 15 针 MIPI CSI 摄像头接口、一个 microSD 卡槽、两个 USB Type-C 接口(USB 2.0 高速与调试/JTAG),以及一个 14 针 GPIO 扩展排针。

有意思的是,尽管 ESP32-P4 支持 MIPI DSI 显示屏,板载的这块 4.3 英寸屏幕却采用 18 位并行 RGB 接口(RGB_D0 至 RGB_D17),从而把 MIPI CSI-2 接口留给兼容树莓派的摄像头模块。由于板上搭载了两颗独立的 ESP32 芯片,PCB 上为主控 ESP32-P4 和配套的 ESP32-C5/C61 无线模块各配备了一个 7 针 MX1.25 调试排针,此外还有板载 USB-C 调试口。

该板可使用乐鑫的 ESP-IDF(v6.x)、Arduino IDE 以及用于构建 HMI 应用的 LVGL 图形库进行编程。厂商还提供了两个 GitHub 仓库:ZX4D30CE40S_V13 仓库用于 ESP32-P4 主控固件和 BSP 驱动,ZX4D30CE40S_V13_slave 则用于 ESP32-C5/C61 无线协处理器固件。公司还提供 PDF 原理图、2D DWG 图纸和 3D STEP 文件,链接可在中文用户手册中找到。

我们此前介绍过 Wireless-Tag 的 WT99P4C5-S1 和 WTDKP4C5-S1 开发板,两者同样将 ESP32-P4 与 ESP32-C5 组合以实现双频 Wi-Fi 6 连接;也评测过 Maker Go ESP32P4C5 核心板,它配备兼容树莓派的 MIPI 显示和摄像头接口。不过这三块板都需要外接显示器。WT32P4C5-43S 自带 4.3 英寸触摸屏,是面向 HMI 应用更完整的「交钥匙」方案。我们还介绍过 GUITION JC4880P433,它同样配备 4.3 英寸触摸屏,但采用的是仅限 2.4GHz Wi-Fi 6 的 ESP32-C6 模块。

Wireless-Tag WT32P4C5-43S 在该公司在线商店售价 32 美元,另有一个标为「WT32P4C5-43S with」的第二种选项售价 37 美元。产品页面并未清楚说明更贵的选项包含什么内容。

Debashis Das 是一名技术内容撰稿人兼嵌入式工程师,在行业内有超过五年经验,擅长嵌入式 C、PCB 设计与 SEO 优化,善于把艰深的技术话题讲清楚。

本文来源:https://www.cnx-software.com/2026/10/11/wireless-tag-wt32p4c5-43s-a-fully-integrated-4-3-inch-esp32-p4-and-esp32-c5-touch-display-devkit/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Designed for industrial automation, smart control panels, and edge AI vision terminals, the board also integrates a 15-pin MIPI CSI camera interface, a microSD card slot, two USB Type-C ports (USB 2.0 High-Speed and Debug/JTAG), and a 14-pin GPIO expansion header.

Wireless-Tag WT32P4C5-43S (ZX4D30CE405-V1.3) specifications:

What’s interesting is that though the ESP32-P4 supports MIPI DSI displays, the onboard 4.3-inch screen uses an 18-bit parallel RGB interface (RGB_D0 to RGB_D17), leaving the MIPI CSI-2 interface for Raspberry Pi-compatible camera modules. Because the board features two separate ESP32 chips, the PCB includes 7-pin MX1.25 debug headers for both the main ESP32-P4 controller and the companion ESP32-C5/C61 wireless module, along with the onboard USB-C debug port.

The board can be programmed with Espressif’s ESP-IDF (v6.x), Arduino IDE, and the LVGL graphics library for building HMI applications. The manufacturer also provides two GitHub repositories: the ZX4D30CE40S_V13 repository is for the main ESP32-P4 firmware and BSP drivers, and ZX4D30CE40S_V13_slave for the ESP32-C5/C61 wireless coprocessor firmware. The company also provides PDF schematics, 2D DWG drawings, and 3D STEP files, with links available in the Chinese user manual.

Wireless-Tag WT32P4C5-43S – A fully integrated 4.3-inch ESP32-P4 and ESP32-C5 touch display devkit

We have previously covered Wireless-Tag’s WT99P4C5-S1 and WTDKP4C5-S1 development boards, both combining the ESP32-P4 with an ESP32-C5 for dual-band WiFi 6 connectivity. We also looked at the Maker Go ESP32P4C5 Core Board, which features Raspberry Pi-compatible MIPI display and camera connectors. However, all three boards need a separate display. The WT32P4C5-43S includes a 4.3-inch touchscreen, making it a more complete “turnkey” solution for HMI applications. We have also covered the GUITION JC4880P433, which has a similar 4.3-inch touchscreen but uses an ESP32-C6 module limited to 2.4 GHz WiFi 6.

The Wireless-Tag WT32P4C5-43S is available from the company’s online store for $32, while a second option listed as “WT32P4C5-43S with” (no typo or missing word) costs $37. The product page does not clearly explain what the more expensive option includes.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry