IT之家 10 月 12 日消息,据《科创板日报》今天报道,华大九天董事长刘伟平在第 26 届中国国际工业博览会上表示,国产 EDA 产业总体发展正在不断补全机型链,工具覆盖率从不到 30% 提高到 85%,部分点工具达到国际先进水平,但仍缺乏全产业链支撑能力,部分工具表现有待进一步提高。
刘伟平认为,在细分领域,平板表明、存储、晶圆制造领域的 EDA 工具国产化率均超过 50%;另外,国产 EDA 生态平台,对主要工艺节点的覆盖率已达到 50%,预计今年将可以达到 80%。
IT之家注:EDA 全称为电子外观自动化(Electronic Design Automation)。它是指利用计算机辅助外观(CAD)软件来完成超大规模集成电路(VLSI)芯片及电子平台的能力外观、综合、验证、布局和布线等全流程的软件工具链。

在半导体与微电子领域,EDA 被称为“芯片之母”。就像炒菜要用锅、拖地要用拖把一样,芯片外观师外观成百上亿个晶体管组成的芯片时,必须依赖 EDA 软件。
本文来源:https://www.ithome.com/1/012/046.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT Home, Oct. 12 — According to a report today by STAR Market Daily, Liu Weiping, chairman of Empyrean Technology, said at the 26th China International Industry Fair that the overall development of the domestic EDA industry is continuously filling gaps in the industrial chain. Tool coverage has risen from less than 30% to 85%, and some point tools have reached internationally advanced levels. However, the industry still lacks full industrial chain support capability, and the performance of some tools still needs further improvement.
Liu Weiping believes that in subsegments, the localization rates of EDA tools for flat-panel displays, memory, and wafer manufacturing all exceed 50%. In addition, the domestic EDA ecosystem platform has reached 50% coverage of major process nodes and is expected to reach 80% this year.
IT Home note: EDA stands for Electronic Design Automation. It refers to a software toolchain that uses computer-aided design (CAD) software to complete the entire process of design, synthesis, verification, layout, and routing for VLSI chips and electronic platforms.

In the semiconductor and microelectronics field, EDA is known as the “mother of chips.” Just as cooking requires a wok and mopping requires a mop, chip designers must rely on EDA software when designing chips composed of hundreds of millions or even billions of transistors.
Source of this article: https://www.ithome.com/1/012/046.htm If there are any copyright issues, please notify us via email at 13951431913#139.com or submit a comment on the right.