
Prusa Core One+ INDX 是 Prusa 基础 FDM 打印机的一款有趣升级,配备了八个独立喷头——因此命名为 INDX——理论上可以实现多材料、多色打印,且 purge 废料极少。但 [Thomas Sanladerer] 在使用过程中发现,这台机器存在诸多问题,包括(或缺乏)使用非 Prusa 品牌耗材的能力。
虽然前提条件很扎实——据称每种颜色或材料更换时仅产生0.013克的清废废料,并且配备了相当不错的双齿轮Bondtech挤出机——但[Thomas]遇到的第一个重大障碍是:启动打印时的强制校准序列仅设计为与普宙自己的耗材及其特定的材料特性配合使用。这导致在使用Voxel PLA材料时无法打印,直到[Thomas]手动从g-code中移除了该序列。
这时[Thomas]才发现,整个打印序列都使用普宙耗材的材料预设,导致打印失败。手动校准的结果也不会被保存,尽管显示屏声称会保存,这使得每次启动打印时的校准完全无法跳过。
另一个问题是摄像头位置毫无用处,现在被INDX硬件完全遮挡,甚至手动查看打印舱也被挤出器支架严重遮蔽。这使得即使检查耗材是否正确加载也几乎不可能,更不用说观察打印过程了。
尽管这款INDX升级的Core One+有很多可取之处,但上述问题以及视频中讨论的其他问题,使其在与Bambu Lab H2C、Snapmaker U1以及Prusa自己的XL换刀打印机的竞争中显得较为薄弱。在[Thomas]进行的XL与Core One+ INDX的打印测试对比中,XL Simply works(表现稳定可靠),而INDX甚至在某些Prusa耗材上都遇到困难。
本文来源:https://hackaday.com/2026/10/12/the-prusa-core-one-indx-a-troubled-multi-extruder-upgrade/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Although the premise is solid, with a claimed 0.013 grams of purge waste per color or material change along with pretty nice dual-gear Bondtech extruders, the first major hurdle that [Thomas] encountered was that the mandatory calibration sequence on starting a print is designed to only work with Prusa’s own filament and its specific material properties. This resulted in an inability to print with Voxel PLA until [Thomas] removed this sequence manually from the g-code.
This is when [Thomas] found out that the entire print sequence uses the material presets for Prusa’s filament, resulting in a failed print. The results from the manual calibration are also not saved despite the display claiming it does, making this calibration on starting a print absolutely mandatory.
Other issues found are the useless position of the camera as it’s now blocked-off by the INDX hardware, with even manual peeking into the print chamber being heavily obscured by the contraption that holds the extruders. This makes even checking that filament has loaded correctly is borderline impossible, never mind ogling the printing process.

Although there’s a lot to like about this INDX upgrade to the Core One+, the above and other issues discussed in the video make it look somewhat shaky next to competitors like the Bambu Lab H2C and Snapmaker U1, as well as Prusa’s own XL toolchanger printers. During [Thomas]’s print test comparison between the XL and the Core One+ INDX there was no contest that the XL simply works, whereas the INDX even struggles with some Prusa filaments.