
有时候,你想搭个简单的项目——能解决你的问题、不多不少的最低可行产品。但另一些时候,你可能想放纵一下,用大量的机加工铝合金、六个步进电机、两台摄像头、一块 Teensy 和一台带 GPU 的 PC,就为了弹一颗球。这就是 [T-Kuhn] 的六轴弹球器的创作背景,相当于一款“超级强化版”的 Stewart 平台。你可以在他的博客上详细了解,也可以看下面的视频感受它的实际效果。相信我,真的值得亲眼看看。
六个通过行星齿轮箱连接的步进电机各自驱动一个机械臂。巧妙的连杆机构使得这些步进电机能够在每个旋转和平移轴向上控制乒乓球拍。一块 Teensy 4.0 负责协调这些步进电机,而实际的指令则来自一台 PC,其上运行的 Unity 应用程序(已在 GitHub 上公开)正利用两台摄像头对球进行三维追踪,并通过逆运动学进行计算。在那里,GPU 大派用场。文章和视频都对此逆运动学部分做了更详细的说明。
至于物理结构,如前所述,它主要由铝材在[T-Kuhn]的CNC机床上铣削而成。虽然零件数量并非不可计数,但每个机械臂都需要雕刻27块铝块——再加上底座中的所有部件。总数超过300个。用这样的机器人来完成抛接球这样 mundane 的任务,非常令人印象深刻,这也让它成为我们本周见过的最过度工程化的东西。为[Tobias]点赞!
与我们见过的其他六足机器人相比,它们大多是反过来的,但因为上一个金属款是令人毛骨悚然的人形步行器,我们原谅了它们的错位。[T-Kuhn]用于追踪球的计算机视觉工作流程是他此前在八足弹跳机器人上开创的,我们之前也有报道过。
感谢[Tobias]提供线索!如果你做出来的东西太过夸张,以至于亲友开始质疑你的 sanity,欢迎投喂到我们的提示热线!我们懂的。
本文来源:https://hackaday.com/2026/10/12/the-hexa-bouncer-may-be-the-most-overengineered-thing-you-see-this-week/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
The six stepper motors connected to planetary gearboxes each drive an arm. Ingenious linkages allow the steppers to control a ping-pong paddle in every axis of rotation and translation. A Teensy 4.0 coordinates those steppers, but the marching orders are coming from a PC where a Unity application — available on GitHub — is performing Inverse Kinematics using the two cameras to track the ball in 3D. You might imagine a GPU comes in handy there. Both the article and the video get into more detail on the IK.
As for the physical build, as stated, it’s mostly aluminum milled out on [T-Kuhn]’s CNC machine, and while the pieces aren’t actually innumerable, he has to carve out 27 chunks of aluminum for each arm– plus all the bits in the base. The total count is over 300. It’s a very impressive robot to do the very mundane job of ball bouncing, which makes it probably the most overengineered thing we’ve seen this week. Kudos to [Tobias] for that!
Most of the other hexapods we’ve seen have been upside down in comparison, but since the last metal one was a horrifying man-carrying walker, we’ll forgive their misalignment. The computer vision workflow [T-Kuhn] is using for ball tracking is one he pioneered on his octo-bounce robot, which we also covered.

Thanks to [Tobias] for the tip! If you’ve built something so amazingly over-the-top that friends and family question your sanity, bounce it into our tips line! We understand.