
说到软件定义无线电(SDR),最有名的当属 RTL-SDR——它之所以便宜,是因为它本质上是一台数字电视接收机,被改用来输出原始 I/Q 数据流。但能做到这件事的芯片组当然不止它一个,今天我们又多了一个。
Gemtek W1700K WiFi 7 路由器里的联发科 MT7996 射频芯片,就可以充当一台相当能干的 SDR 接收机——h0m3us3r 提供了代码,让数据通过设备 SoC 经以太网流送到一台带 Web 服务器的 Linux 机器上。
该射频视版本(也就是射频芯片版本)不同,可工作于 2.4、5 和 6 GHz 频段。对很多人来说这些频段未必实用;而且考虑到 ESP32 射频也已在 2.4 GHz 上被破解出类似玩法,上行上变频器的需求恐怕迟早会出现。在那之前,你可以尽情地在瀑布图上围观 WiFi 数据包。
如今集成射频的设备越来越多,我们希望未来能挖出更多这类未公开文档的原始流模式,见到更多新 SDR。值得期待。
本文来源:https://hackaday.com/2026/10/12/wifi-router-does-software-defined-radio/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
by Jenny List, October 12, 2026
Perhaps the most famous of software-defined radios is the RTL-SDR, which is very cheap because it's a digital TV receiver that's been pressed into service delivering raw I and Q data streams. But the RTL-SDR is certainly not the only chipset that can do this, and today we have a new one.
The MediaTek MT7996 radio chip in the Gemtek W1700K WiFi 7 router can serve as a very competent SDR receiver, and here's h0m3us3r with the code to make it stream over Ethernet to a Linux machine with a web server, through the device's SoC.

The radio works on the 2.4, 5, and 6 GHz bands, depending upon which version of the device — and thus which radio chip — you have. These may not be entirely useful to many who use lower bands, and given that a similar hack has been found for ESP32 radios on 2.4 GHz it's likely a demand will arise for a receive up-converter. Until then, you can look at WiFi packets in a waterfall view to your heart's content.
Since more and more devices now incorporate a radio, we hope that more such undocumented raw streaming modes will be found, and that we'll see some other new SDRs. Something to look forward to.