
通常来说,DVB-S/S2 标准需要地球轨道上的卫星来提供接收信号,但只要你愿意,也可以用任意射频发射机自己发射 DVB-S2 码流。得益于近期在原始层面调用 ESP32 射频硬件的多项突破,[SP8ESA] 创建了 ESP32-DATV 项目,用一块 ESP32-C3 就能广播 DVB-S2 信号。
在这套方案中,PC 端应用负责把输入视频信号转换成符合 DVB-S/S2 规范的信号这一重活;ESP32-C3 则负责在发送给射频模块前准备好采样数据,且无需任何外部硬件。
这可能让人联想到用现成 DVB-S2 接收机来回放该信号——但 DVB-S2 的工作频段是 10.7–12.7 GHz,而 ESP32-C3 受限于仅面向 2.4GHz Wi-Fi 与蓝牙信号的设计,射频能力大致只有 2.4GHz。两者相差甚远,因此该玩法更接近于射频层面的技术验证与实验,而非真正替代卫星链路。
用 ESP32 进行发射已是一股日渐升温的风潮,ESP32-DATV 项目则为业余无线电与数字电视爱好者提供了新的折腾方向。项目代码已在 GitHub 开源。
本文来源:https://hackaday.com/2026/10/14/using-an-esp32-c3s-rf-hardware-for-dvb-s2-video-transmission/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Generally the DVB-S and -S2 standards require a satellite somewhere in Earth orbit to provide a signal to receive, but you can also transmit your own DVB-S2 stream with any RF transmitter if you're so inclined. Courtesy of recent breakthroughs in using the RF hardware of the ESP32 on a raw level, SP8ESA has created the ESP32-DATV project using which you can broadcast a DVB-S2 signal using an ESP32-C3.

While a host PC side application handles the heavy lifting of turning the input video signal into a DVB-S(2) compliant signal, it is the ESP32-C3 that prepares the samples for transmission before sending them off to its RF block, with no external hardware needed.
This brings to mind the idea of using an off-the-shelf DVB-S2 receiver to play back the signal, but the frequency range for DVB-S2 is 10.7 - 12.7 GHz, while the ESP32-C3 is limited to roughly 2.4 GHz courtesy of it targeting only 2.4 GHz Wi-Fi and Bluetooth signals. Using the ESP32 to transmit is already heating up.