
确定一个可动态变化物体的形状颇费周折,对虚拟现实(VR)爱好者尤其如此。感知四肢与关节的朝向通常需要摄像头等外部传感器,或者只能聚焦手部、手指等特定细节。一种更全面且可能更灵活的方案是使用光波导——Qifan Yu 等人在《Advanced Intelligent Systems》期刊最近发表的文章中展示了这一思路。
波导是引导电磁波传播的结构,本文所用的是工作于光学波段的光波导。研究者没有采用廉价的光纤,而是定制了弹性体波导,以双面交错的锯齿形图案铺设在薄片上。由于波传播特性会随形状改变,通过表征信号在波导中的行为,即可重建薄片本身的形状。
研究团队将薄片缠绕在志愿者的手臂、肘部和手上,验证了该方法能准确检测单个关节的弯曲与运动。尽管演示配置尚显笨重、算法也有待优化,但该技术未来有望微型化到可织入普通织物的程度。这将使传感薄片能够追踪从机器人到人体的各种构型,在 VR 等场景中大有可为。
本文来源:https://hackaday.com/2026/10/15/using-optical-waveguide-arrays-to-make-sheets-sense-shapes/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Determining the shape of an object which can change dynamically is a bit of a challenge, one that especially vexes those who are really into Virtual Reality. Sensing the orientation of various limbs and appendages usually requires external sensors like cameras, or limits the focus to specific details like just the hands and fingers of the player. A more comprehensive and potentially flexible approach might be possible using optical waveguides, as demonstrated by Qifan Yu et al. in a recent article in Advanced Intelligent Systems.
Waveguides are structures that guide electromagnetic waves, with optical waveguides such as used here targeting EM radiation in the optical band. This can even allow for the use of cheap and plentiful optical fiber, though here custom elastomeric waveguides are manufactured. These are laid out onto the sheet in a double-sided, overlapping zig-zag pattern, which allows for easy reconstruction of the shape of said sheet based on how the wave propagation through the waveguide changes.

By characterizing the behavior of the signals through the waveguide, its shape and thus that of the sheet can be reconstructed. This was then demonstrated to be accurate by wrapping the sheet around a volunteer's arm, elbow and hand, detecting the flexing and movement of individual joints.
Although fairly bulky in the demonstrated configuration and with an unoptimized algorithm, it is conceivably something that can be miniaturized to the point where it can be woven into regular fabric. This could make for sensor sheets that could track the configuration of everything from robots to human bodies for something like VR purposes.