制作第一块活动徽章的酸甜苦辣:1750 块 Hack The North 徽章背后的教训The Trials And Tribulations Of Your First Badge


AI free token/AI免费积分
制作第一块活动徽章的酸甜苦辣:1750 块 Hack The North 徽章背后的教训

表面上看,制作一块活动徽章应该是件轻松的事——毕竟我们大多数人都能手工组装一块微控制器、几个按键、一块电池和一块屏幕。但任何真正参与过徽章生产的人都会告诉你:做一两块,与确保数百甚至数千块在活动第一天全部正常交付,二者之间的差距巨大。

Nicholas Ficara 为加拿大的 Hack The North 黑客马拉松制作了他的第一批共 1750 块徽章,并把完整经历分享在了博客中。Hackaday 编辑部自己也参与过不止一块徽章的孕育过程,因此对他的那些「学习时刻」深有共鸣。

他的做法值得称道:以一整套精心规划的原型与发布候选(RC)步骤来提前排查问题——而这确实派上了用场,因为问题真出了不少:错误的封装、错位的元件、电源故障以及贴片方向贴反,逐一得到修复后,徽章最终如期交付,并在活动现场广受欢迎、被充分把玩。

如果你也打算做一块徽章,我们强烈推荐读一读这篇文章。几年前,Hackaday 还报道过另一块徽章的故事——其创作者付出了艰苦努力,把徽章从一个更严重的元件错误中救了回来。

本文来源:https://hackaday.com/2026/10/16/the-trials-and-tribulations-of-your-first-badge/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

On the face of it, making an event badge should be an easy process. After all, most of us can hand-assemble a microcontroller, some buttons, a battery, and a screen. But anyone who has been involved in producing one will tell you, the difference between producing one or two, and making sure hundreds or even thousands appear on day one of the event fully working is enormous. Nicholas Ficara produced 1750 of his first badge for Canada's Hack The North hackathon, and he's shared the full story.

We've been involved with the gestation of more than one badge here at Hackaday, so we recognise some of his learning moments only too well. He approached it with a well-planned series of prototype and release candidate steps to catch the problems, which came in handy as there certainly were a few. Wrong footprints, misplaced components, power supply issues, and rotated parts were fixed, and eventually they were delivered in time. It's good to see that they were well received and well used at the event.

If you're thinking of doing a badge we can certainly recommend that you give this a read. A few years ago we wrote up the story of another badge whose creators put in some hard work to save it from a more serious part error.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry