IT之家 10 月 17 日消息,工信部昨晚发布第 412 批《道路机动车辆生产企业及机型公告》新机型公示,上汽荣威家越 07 纯电动版完成申报。
申报信息表明,荣威家越 07 定位纯电动运动型乘用车,外观尺寸为长 4900 mm、宽 1910 mm、高 1745 / 1753 mm,轴距达到 2908 mm,前轮距 1643 mm,后轮距 1657 mm,接近角 19 度,离去角 22 度,前悬 917 mm,后悬 1075 mm,额定载客为 5 座。
IT之家注意到,该车整备质量分为 2050 kg、2075 kg、2120 kg 三个版本,总质量对应为 2475 kg、2500 kg、2545 kg,给出 245/55R19、245/50R20 两种轮胎规格可选,最高车速可达 200 km/h。
动力维度,该车搭载由联合汽车电子有限公司生产的型号为 TZ210XS1141 驱动电机,峰值功率为 245 kW,额定功率 95 kW;储能装置为磷酸铁锂电池,电池总成由上汽时代动力平台(南京)有限公司生产,单体由江苏正力新能电池工艺股份有限公司给出。
规格维度,该车标配防抱死制动平台,配备汽车事件数据记录平台 (EDR),可选装 ETC 车载装置;同时给出多项选装规格,涵盖后三角窗玻璃、车门玻璃、后风窗玻璃、扰流板、翼子板饰件、后标牌、轮辋,还可以挑选不带激光雷达、不带行李架。ABS 平台由上汽联创智能网联科技(江苏)有限公司给出,型号为 IEB20。
以下为汽车参数详情:
本文来源:https://www.ithome.com/1/014/406.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
On October 17th, the Ministry of Industry and Information Technology released the 412th batch of "Announcement on Road Motor Vehicle Manufacturing Enterprises and Models", and the pure electric version of SAIC Roewe Jiay 07 was completed.

The declaration information shows that Roewe Jiay 07 is positioned as a pure electric sports passenger car. The appearance dimensions are 4900 mm long, 1910 mm wide, 1745/1753 mm high, the wheelbase reaches 2908 mm, the front wheelbase is 1643 mm, the rear wheelbase is 1657 mm, the approach angle is 19 degrees, the angle of departure is 22 degrees, the front suspension is 917 mm, the rear suspension is 1075 mm, and the rated passenger capacity is 5 seats.

IT Home noticed that the vehicle's kerb mass is divided into three versions: 2050 kg, 2075 kg, and 2120 kg. The total mass corresponds to 2475 kg, 2500 kg, and 2545 kg. Two tire specifications, 245/55R19 and 245/50R20, are available, and the maximum speed can reach 200 km/h.
Power dimension, the vehicle is equipped with a model TZ210XS1141 drive motor produced by United Automobile Electronics Co., Ltd., with a peak power of 245 kW and a rated power of 95 kW; the energy storage device is a lithium iron phosphate battery, the battery assembly is produced by SAIC Times Power Platform (Nanjing) Co., Ltd., and the monomer is given by Jiangsu Zhengli New Energy Battery Process Co., Ltd.

Specification dimension. The vehicle standard is equipped with an antilock brake platform, equipped with an automotive event data recording platform (EDR), and can optionally be equipped with etc vehicle-mounted devices. At the same time, a number of optional specifications are given, including rear triangle window glass, door glass, rear windshield glass, spoiler, wing panel trim, rear signs, rims, and can also be selected without lidar and luggage rack. The ABS platform is given by SAIC Lianchuang Intelligent Networking Technology (Jiangsu) Co., Ltd. and the model number is IEB20.

Here are the details of the car parameters:
This article is from: https://www.ithome.com/1/014/406.htm For copyright issues, please write to: 13951431913#139.com or submit a review on the right.