开源微操作器升级 4.0:步进电机加并联运动学,可编程走 G 代码An Open Micro-Maniplulator Improved


AI free token/AI免费积分
开源微操作器升级 4.0:步进电机加并联运动学,可编程走 G 代码

微操作器用于在三个轴向上以极小步距精确移动物体,典型场景是把探针移到芯片裸片或晶圆上,或在显微镜下做微米级操作。开源项目 MicroManipulatorStepper 近日发布 4.0 版本,对机械结构与文档做了大幅更新。

该设备采用步进电机、并联运动学结构与微型球铰实现精密运动。4.0 版针对社区反馈集中修掉了几处结构缺陷:归零过程中的自碰撞问题、球铰块仅靠螺钉连接导致约束不足而可轻微转动、连接杆长度无法保证一致、球铰存在不必要的摩擦,以及球位精度过度依赖打印质量与边角圆角的问题。

此外,早期版本中用胶固定的橡皮筋无法更换或拆除,这一设计也在新版中被替换。项目同时更新了驱动 API,现在可以直接用 G 代码调用工具,从而支持激光雕刻等需要精细控制的场景。

从工程角度看,这类并联结构把三个执行器的位移合成到末端一点,刚性高、惯量小,适合微米级定位;难点在于球铰的制造精度与装配一致性——这也是 4.0 版花最多力气的地方。项目代码与结构文件已在 GitHub 开源,配套视频演示了装配与运动效果。

如果不需要电动方案,社区也有纯手动、3D 打印的微操作器方案,成本更低,适合教学与低频使用。对于需要长期稳定定位的实验室场景,步进电机加闭环反馈仍是更可靠的选择。

本文来源:https://hackaday.com/2026/10/19/an-open-micro-maniplulator-improved/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

If you need a micro-manipulator, you probably already have a good idea of what it does. For example, you might be moving a probe over an IC die or wafer. You might be looking at something through a microscope. The key is moving something in very small, precise increments along three axes. An open-source design for a micro-manipulator has seen significant improvements lately. You can see several videos about the device below.

The device uses stepper motors, parallel kinematics, and miniature ball joints to achieve precise motion. The recent version 4.0 update fixes a few problems. According to the GitHub page:

Connection of the ball joint block with screws only was not well constrained and could be rotated a bit.

Accurate ball position heavily dependent on print quality and corner rounding

We’ve covered earlier versions of this device , and we were watching the improvements to the ball joints . Since then, the project has updated much of its mechanical design and documentation, and it has also changed the API that drives it. It can even use tools in g-code now to support things like fine control over laser engraving.

If you prefer something old-school manual, consider a 3D-printed one .

An Open Micro-Maniplulator Improved

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry