用 Arduino Pro Micro 做转接器:让世嘉 Genesis 手柄在飞利浦 CD-i 上复活Arduino Pro Micro Adapter: Running Sega Genesis Controllers on the Philips CD-i


AI free token/AI免费积分
用 Arduino Pro Micro 做转接器:让世嘉 Genesis 手柄在飞利浦 CD-i 上复活

Hackaday 消息,1991 年上市的飞利浦 CD-i 当年销量惨淡,如今也几乎被人遗忘。在硬件玩家 MattKC 看来,它的手柄选择尤其糟糕,而且二手市场一柄难求。为了改变这一局面,他做了一个转接器,让自己能用世嘉 Genesis(MD)手柄玩 CD-i。

Genesis 手柄的优势在于使用随处可得的 DB-9 接口,并且引脚定义简单,还与雅达利操纵杆端口兼容,接线非常方便。转换工作用一颗 Arduino Pro Micro 完成:读取 Genesis 手柄的按键状态,再翻译成 CD-i 能识别的信号。

在世嘉手柄一侧,单片机只需选通一个引脚、同时读取其他引脚的状态,即可判断所有按键情况。而 CD-i 期待的是原装飞利浦手柄那样的串行数据流,因此单片机被设定为轮询 Genesis 手柄,再把结果翻译成 CD-i 的串行指令。这件事稍微有点复杂,因为 CD-i 并不是为游戏手柄设计的,它期待的其实是鼠标类输入。不过一旦弄清楚这台古怪的飞利浦主机到底在等什么,让手柄工作起来也并非难事。

CD-i 上实在没什么好游戏,所以这个项目大概不会吸引大众复古玩家;但如果你手里正好有一台 CD-i 又想低成本接手柄,这个开源项目(github.com/itsmattkc/gencdi)值得一试。或者,也可以看看此前的 BlueRetro 项目。

本文来源:https://hackaday.com/2026/10/21/sega-genesis-controllers-on-the-philips-cd-i/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

The Philips CD-i was not popular upon its launch in 1991, and is barely acknowledged today. In the opinion of MattKC, it had a particularly poor selection of controllers, too, and it's often hard to find used examples anyway. To rectify this situation, he whipped up an adapter to let him use Sega Genesis controllers instead.

The benefit of the Genesis controller is that it uses DB-9 connectors that are readily available, and it's got a simple pinout that is compatible with the Atari joystick port, too. It makes interfacing the controllers supremely easy. Converting the controllers required using an Arduino Pro Micro to read the Genesis pad and translate it into something suitable for the CD-i.

On the Sega controller side, the microcontroller just has to strobe one pin while reading the state of others to determine what all the buttons are doing. The CD-i, however, expects a serial data stream from the original Philips controllers. Thus, the microcontroller is set up to poll the Genesis controller, and then translate this into the serial commands for the CD-i. It gets a little complicated, because the CD-i wasn't really built for game controllers, but mouse-like inputs instead.

There aren't really any good games on the CD-i, so this isn't a project that the retro gaming masses will be flocking to. Still, if you have a CD-i and you want to hook up some controllers on the cheap, this might come in handy.

Arduino Pro Micro Adapter: Running Sega Genesis Controllers on the Philips CD-i

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry