
RepRapMicron(又称 µRepRap)大体上是 RepRap 在更宏观制造领域所做之事的"显微版",其最新创新是一颗名为 PIKA UV Head 的 UV 打印头。它使用现成的光纤与 UV LED 模组,在 UV 树脂中原位(in-situ)构建 3D 结构,可以打印相当小的结构,分辨率低至约 9 微米。
更多打印照片可在博客页找到,另有 YouTube 视频链接。要给一个小到"打个喷嚏或呼吸重一点就会永远弄丢"的 3D 打印件拍出干净的照片,自然多少有些棘手。

在 UV 头组件上,使用者用了一根普通单模光纤跳线(用钢锯稍微截短了一截),搭配一个标称"3W"的 UV LED 模组——这个功率标注未必属实,但它确实能固化 SLA 树脂。使用的树脂是普通的 eSun 标准树脂。
打印完成后还要做 SLA 标准的后处理,包括清理零件与光纤上的液态树脂、以及对零件进行二次固化。目前效果相当不错,悬垂结构仍是短板,将在后续版本中改进。

本文来源:https://hackaday.com/2026/10/23/reprapmicron-uses-fibre-optics-to-print-tiny-benchy-in-resin/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
The RepRapMicron (also µRepRap) is pretty much the microscopic take on what RepRap did for more macroscale manufacturing, with the most recent innovation being a UV print head, called the PIKA UV Head. What this does is use off-the-shelf optical fiber and UV LED modules to create 3D structures in-situ in a UV resin, allowing for pretty small structures to be printed, down to a resolution of about 9 µm.
More photos of prints can be found on the blog page with links to YouTube videos. It’s naturally somewhat tricky to get clean photographs of a 3D print that’s small enough to lose forever if you so much as sneeze or breathe too loudly.

For the UV head assembly a single mode fiber optical cable was used in the form of a regular patch cord that got trimmed a bit with a hacksaw. This was used in combination with a “3W” UV LED module, which may or may not be its true rating, but it was definitely able to cure the SLA resin. The used resin was regular eSun Standard Resin.

Afterwards you have to do the typical SLA post-processing, including cleaning off of liquid resin – both the part and fiber – and curing the part. So far results are pretty decent, with overhangs still being a weak spot that will be addressed in future revisions.