IT之家 10 月 24 日消息,沃尔沃汽车透露,由于新工艺和制造工艺带来了生产难题,全新纯电 SUV EX60 的产能爬坡速度低于预期。
今年 4 月投产以来,新车订单量已超过 5 万辆,但实际产量仅为 5000 辆。沃尔沃 CEO 汉肯 · 塞缪尔森坦言:“笔者的产能爬坡进度落后于原先计划,因而 EX60 对公司财务业绩产生贡献的时间也将推后。”
EX60 迟迟无法达成大规模生产的时间节点,恰逢沃尔沃业绩承压。23 日公布的财报表明,公司 2026 年第三季度净亏损 57 亿瑞典克朗(IT之家注:现汇率约合 38.28 亿元人民币),季度表现“格外令人失望”。为恢复盈利,沃尔沃还宣布计划裁员 2500 人。
塞缪尔森指出,EX60 是沃尔沃扭亏计划中的关键车型,将来有望成为公司利润贡献最大的车型之一。但在哥德堡附近的托斯兰达工厂达成满负荷生产前,EX60 还难以充分发挥改善公司盈利状况的作用。
相比之下,宝马近期宣布,去年 10 月发布的 iX3 已取得 10 万辆订单。据英媒 Autocar 报道,作为 EX60 的直接竞争对手,iX3 在产能爬坡维度进展更快。为满足市面需要,宝马匈牙利新工厂以公司历史上最快的速度提高产量。德布勒森工厂最近增加了第三班次,当下已达成全天候满负荷运转。
沃尔沃首席商务官埃里克 · 塞维林森透露,EX60 的生产启动过程未能达到预期。由于新车使用全新的 SPA3 平台,工厂必须对原有生产流程开展大幅调整。
为生产 SPA3 平台纯电车型,沃尔沃已向托斯兰达工厂投入近 7.5 亿英镑(现汇率约合 67 亿元人民币)。新平台使用一体化压铸工艺,以大型压铸件取代多个独立车身零部件,并引入电芯与车身一体化工艺,将电芯直接集成到车身结构中。
沃尔沃将此次生产延误主要归因于电池集成工艺,并强调,EX60 面临的难题与 2024 年导致旗舰车型 EX90 推迟上市的软件故障毫无关系。
塞缪尔森指出,EX60 投产初期进展缓慢,反映出新车与沃尔沃现有纯电车型在制造工艺上的差异。当下,沃尔沃正稳步提高 EX60 的产量。
本文来源:https://www.ithome.com/1/017/381.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT House news on October 24th, Volvo Cars revealed that the production capacity of the new pure electric SUV EX60 climbed slower than expected due to production difficulties caused by new processes and manufacturing processes.
Since the start of production in April this year, the number of new car orders has exceeded 50,000, but the actual output is only 5,000. Hanken Samuelsson, CEO of Volvo, said frankly: "The climb of my production capacity is behind the original plan, so the time for the EX60 to contribute to the company's financial results will also be delayed."
The delay in reaching the mass production timing of the EX60 coincided with pressure on Volvo's results, which showed a net loss of SEK 5.7 billion in the third quarter of 2026 (IT House note: the current exchange rate is about RMB 3.828 billion), a quarterly performance that was “particularly disappointing”. To return to profitability, Volvo also announced plans to cut 2,500 jobs.
Samuelsson pointed out that the EX60 is a key model in Volvo's turnaround plan and is expected to be one of the models that will contribute the most to the company's profits in the future. But until full production is achieved at the Toslanda plant near Gothenburg, it will be difficult for the EX60 to play its full role in improving the company's profitability.
In contrast, BMW recently announced that it had secured 100,000 orders for the iX3, which was launched in October last year. According to British media Autocar, as a direct competitor of EX60, iX3 is progressing faster in the production capacity climbing dimension. In order to meet the needs of the market, the new BMW Hungary plant increased production at the fastest rate in the company's history. The Debrecen plant has recently added a third shift and is now operating at full capacity 24/7.
Eric Severinson, Volvo's chief commercial officer, revealed that the production startup process for the EX60 failed to meet expectations. Since the new car uses the new SPA3 platform, the factory has to make significant adjustments to the original production process.
Volvo has invested almost £750m (at an exchange rate of around RMB6.7bn) in the Toslanda plant to produce the SPA3 platform electric model. The new platform uses an integrated die casting process to replace multiple independent body parts with large die castings, and introduces a battery cell and a body integration process to integrate the battery cell directly into the body structure.
Volvo attributed the production delay mainly to the battery integration process, emphasizing that the difficulties faced by the EX60 had nothing to do with the software failure that delayed the launch of the flagship model EX90 in 2024.
Samuelsson pointed out that the EX60's slow start to production reflected the difference in manufacturing processes between the new car and Volvo's existing pure electric models. At the moment, Volvo is steadily ramping up production of the EX60.
This article is from: https://www.ithome.com/1/017/381.htm For copyright issues, please write to: 13951431913#139.com or submit a review on the right.