
如今我们把高速网络视为理所当然,但让上世纪的老古董电脑与现代机器“对话”依然不是件容易事。为了解决这个问题,[jaime] 想出了一个名为 Meatloaf 的方案:无论文件存放在哪里、用什么介质,它都能为 Commodore 电脑提供文件服务。
Meatloaf 的核心是一台 ESP32 设备,通过 Commodore 电脑的 IEC 串行端口与多种型号相连。市面上已有不少类似系统在新旧世界之间架桥,但这一台的独特之处在于:它连接到一个专用服务,无论文件存储在何处都能指向并取回。它自带一部分本地存储,同时可以从任意有效的 URL 检索文件——Meatloaf 抓取文件后,再通过那条串行链路发送给 Commodore。

它另一项独特之处在于用户完全不需要做任何特殊配置:只要知道 URL,一切都从 Commodore 那端操作。系统甚至能解析嵌套文件(如压缩包),像当年从软驱读取一样,把文件原样发送给电脑。GitHub 项目页已公开,想深入研究这套串行数据接口的玩家可以前往围观。


本文来源:https://hackaday.com/2026/10/24/2026-retrocomputing-challenge-i-would-do-anything-for-serial-data/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
These days we take high-speed networking for granted, but it can be difficult to get vintage computers talking to modern machines. To help solve this problem [jaime] came up with Meatloaf which can provide files to a Commodore regardless of their location or medium of storage.
Meatloaf is an ESP32 device at its core, which plugs in to any of several Commodore computers through their IEC serial port. Many similar systems exist to bridge the gap between the modern world and the now-retro one, but this one connects to a dedicated service which points towards files no matter where they’re stored. There is some local storage, but it can also retrieve files from any active URL, and Meatloaf retrieves the files and then sends them to the Commodore over that serial link.



Part of what makes this unique is that the user doesn’t need to configure Meatloaf in any particular way, everything is done from the Commodore as long as the URL is known to the user. The system can even parse nested files like archive file types and send them along to the computer just like it would if they were on a period-correct floppy drive. There’s a GitHub project page as well for anyone looking to get into the weeds of this serial data interface.