Adafruit Metro ESP32-P4 Hydra:UNO 外形双核开发板Adafruit Metro ESP32-P4 Hydra: Arduino UNO-shaped ESP32-P4 + ESP32-C6 board with WiFi 6 and MIPI


AI free token/AI免费积分
Adafruit Metro ESP32-P4 Hydra:UNO 外形双核开发板

Adafruit 推出了 Metro ESP32-P4 Hydra,这是一款 Arduino UNO 形状的开发板,搭载 ESP32-P4、16MB PSRAM 和 16MB NOR flash,并配备了一个 ESP32-C6 用于 WiFi 6、蓝牙 5.3 LE、Thread 和 Zigbee 连接。

其他特性包括兼容 Raspberry Pi 的 MIPI DSI 和 CSI 接口、一个 USB 2.0 高速主机端口、一个 microSD 卡插槽以及 Arduino UNO 扩展引脚。该板卡还包含一个 STEMMA QT 连接器、LiPo 电池充电功能和多种电源输入选项,使其适用于 HMI、摄像头和物联网(IoT)应用。

CPU – 双核 32 位 RISC-V HP(高性能)CPU @ 高达 360 MHz,带 AI 指令扩展和单精度 FPU;单核 RISC-V LP(低功耗)MCU 核心 @ 高达 40 MHz,带 8KB 零等待 TCM RAM

内存 – 768 KB HP L2MEM(用于双核 CPU),32 KB LP SRAM,8 KB TCM(用于 LP MCU 核心),16MB PSRAM

CPU – 双核 32 位 RISC-V HP(高性能)CPU @ 高达 360 MHz,带 AI 指令扩展和单精度 FPU;单核 RISC-V LP(低功耗)MCU 核心 @ 高达 40 MHz,带 8KB 零等待 TCM RAM

双核 32 位 RISC-V HP(高性能)CPU @ 高达 360 MHz,带 AI 指令扩展和单精度 FPU

单核 RISC-V LP(低功耗)MCU 核心 @ 高达 40 MHz,带 8KB 零等待 TCM RAM

内存 – 768 KB HP L2MEM(用于双核 CPU),32 KB LP SRAM,8 KB TCM(用于 LP MCU 核心),16MB PSRAM

768 KB HP L2MEM(用于双核 CPU),32 KB LP SRAM,8 KB TCM(用于 LP MCU 核心)

存储 – 16MB QSPI NOR flash;带 4 位 SDIO 接口的 MicroSD 卡插槽

显示/摄像头 – 2 通道 MIPI DSI 连接器;2 通道 MIPI CSI 连接器;两者均为兼容 Raspberry Pi 的 22 针、0.5mm 间距连接器

无线 – ESP32-C6 SDIO 模块;2.4 GHz WiFi 6 (802.11ax);蓝牙 LE 5.3;支持 Thread 和 Zigbee 的 IEEE 802.15.4 无线电(可能需要额外的固件集成)

支持 Thread 和 Zigbee 的 IEEE 802.15.4 无线电(可能需要额外的固件集成)

USB – 用于供电、串行调试、JTAG 和 TinyUF2 拖放式固件更新的 USB Type-C 端口;USB 2.0 Type-A 高速 (480 Mbps) OTG 主机端口,带有软件控制的电源和专用的 5V 升压供电

用于供电、串行调试、JTAG 和 TinyUF2 拖放式固件更新的 USB Type-C 端口

USB 2.0 Type-A 高速 (480 Mbps) OTG 主机端口,带有软件控制的电源和专用的 5V 升压供电

扩展 – 带有 D0–D13 数字引脚和六个模拟输入的 Arduino UNO 引脚;独立的 6 针 SPI 排针;I2C/I3C、UART、SPI、PWM、ADC、TWAI/CAN 等接口;用于 I2C/I3C 外设的 STEMMA QT 连接器

其他 – RGB NeoPixel 和 D13 用户 LED;Reset 和 Boot 按钮;电源开关;专用 UART 调试连接;电池充电和状态指示灯

电源 – 通过 DC 桶形插孔输入 7–12V;USB Type-C 供电;带板载充电和电压监测的单节 LiPo 电池连接器

MIPI DSI 和 CSI 连接器采用 Raspberry Pi 22 针格式,各有两条数据通道。Adafruit 表示该板卡支持 5 英寸和 7 英寸的 Raspberry Pi Touch Display 2,两者分辨率均为 720 x 1280 并支持电容式触摸。对于摄像头,它支持基于 OV5647 传感器的 Raspberry Pi Zero 风格模块,但不支持较新的基于 IMX708 的 Camera Module 3。

该板卡可以使用 Espressif 的 ESP-IDF 框架进行编程,并支持通过 USB 进行 TinyUF2 拖放式固件更新。CircuitPython 11.0.0-alpha.2 也增加了对 Adafruit Metro ESP32-P4 的支持,尽管 ESP32-P4 端口仍处于 alpha 阶段。该公司还表示正在开发 Arduino 支持。我们尚未找到该板卡的详细文档,因此这应该还是一项进行中的工作。

我们之前曾介绍过 Adafruit Metro ESP32-S3,这是一款类似的 Arduino UNO 风格开发板,但基于 ESP32-S3 构建,并搭配 8MB PSRAM 和 16MB flash。另一款类似的板卡是 Adafruit Metro RP2350,它使用 Raspberry Pi 的 RP2350 MCU,并提供用于 DVI 视频输出的 HSTX 连接器。

本文来源:https://www.cnx-software.com/2026/10/26/adafruit-metro-esp32-p4-hydra-an-arduino-uno-shaped-esp32-p4-esp32-c6-board-with-wifi-6-mipi-interfaces/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Adafruit has launched the Metro ESP32-P4 Hydra, an Arduino UNO-shaped development board with ESP32-P4, 16MB PSRAM, and 16MB NOR flash, and an ESP32-C6 for WiFi 6, Bluetooth 5.3 LE, Thread, and Zigbee connectivity.

Other features include Raspberry Pi-compatible MIPI DSI and CSI interfaces, a USB 2.0 High-Speed host port, a microSD card slot, and Arduino UNO expansion headers. The board also includes a STEMMA QT connector, LiPo battery charging, and multiple power input options, making it suitable for HMI, camera, and IoT applications.

Microcontroller – Espressif Systems ESP32-P4 (v1 chipset) CPU Dual-core 32-bit RISC-V HP (High-performance) CPU @ up to 360 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz with 8KB of zero-wait TCM RAM Memory 768 KB HP L2MEM (for dual-core CPU), 32 KB LP SRAM, 8 KB TCM (for LP MCU core) 16MB PSRAM GPU – 2D Pixel Processing Accelerator (PPA) VPU – H.264 and JPEG codec support

CPU Dual-core 32-bit RISC-V HP (High-performance) CPU @ up to 360 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz with 8KB of zero-wait TCM RAM

Dual-core 32-bit RISC-V HP (High-performance) CPU @ up to 360 MHz with AI instructions extension and single-precision FPU

Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz with 8KB of zero-wait TCM RAM

Memory 768 KB HP L2MEM (for dual-core CPU), 32 KB LP SRAM, 8 KB TCM (for LP MCU core) 16MB PSRAM

768 KB HP L2MEM (for dual-core CPU), 32 KB LP SRAM, 8 KB TCM (for LP MCU core)

Storage 16MB QSPI NOR flash MicroSD card slot with 4-bit SDIO interface

Display/Camera 2-lane MIPI DSI connector 2-lane MIPI CSI connector Both are Raspberry Pi-compatible 22-pin, 0.5mm-pitch connectors

Both are Raspberry Pi-compatible 22-pin, 0.5mm-pitch connectors

Wireless – ESP32-C6 SDIO module 2.4 GHz WiFi 6 (802.11ax) Bluetooth LE 5.3 IEEE 802.15.4 radio supporting Thread and Zigbee (additional firmware integration may be required)

IEEE 802.15.4 radio supporting Thread and Zigbee (additional firmware integration may be required)

USB USB Type-C port for power, serial debugging, JTAG, and TinyUF2 drag-and-drop firmware updates USB 2.0 Type-A High-Speed (480 Mbps) OTG host port with software-controlled power and a dedicated 5V boost supply

USB Type-C port for power, serial debugging, JTAG, and TinyUF2 drag-and-drop firmware updates

USB 2.0 Type-A High-Speed (480 Mbps) OTG host port with software-controlled power and a dedicated 5V boost supply

Expansion Arduino UNO headers with D0–D13 digital pins and six analog inputs Separate 6-pin SPI header I2C/I3C, UART, SPI, PWM, ADC, TWAI/CAN, and other interfaces STEMMA QT connector for I2C/I3C peripherals

Arduino UNO headers with D0–D13 digital pins and six analog inputs

Adafruit Metro ESP32-P4 Hydra: Arduino UNO-shaped ESP32-P4 + ESP32-C6 board with WiFi 6 and MIPI

I2C/I3C, UART, SPI, PWM, ADC, TWAI/CAN, and other interfaces

Debugging – Dedicated hardware/ROM UART debugging connection

Misc RGB NeoPixel and D13 user LED Reset and Boot buttons On/Off switch Dedicated UART debug connection Battery charging and status indicators

Power 7–12V DC via barrel jack USB Type-C for power Single-cell LiPo battery connector with onboard charging and voltage monitoring

Single-cell LiPo battery connector with onboard charging and voltage monitoring

Adafruit Metro ESP32-P4 Hydra board top and bottom side Metro ESP32-P4 Hydra board front and back interfaces

The MIPI DSI and CSI connectors use the Raspberry Pi 22-pin format, with two data lanes each. Adafruit says the board supports the 5-inch and 7-inch Raspberry Pi Touch Display 2 , both with 720 x 1280 resolution and capacitive touch. For cameras, it supports Raspberry Pi Zero-style modules with the OV5647 sensor, but not the newer IMX708-based Camera Module 3.

The board can be programmed using Espressif’s ESP-IDF framework and supports TinyUF2 for drag-and-drop firmware updates over USB. Support for the Adafruit Metro ESP32-P4 was also added to CircuitPython 11.0.0-alpha.2, although the ESP32-P4 port is still in alpha. The company also said it is working on Arduino support. We couldn’t find details documentation for the board, so it must be work-in-progress.

We previously wrote about the Adafruit Metro ESP32-S3 , a similar Arduino UNO-style development board but built around ESP32-S3 paired with 8MB PSRAM and 16MB flash. Another similar board is the Adafruit Metro RP2350 , which uses Raspberry Pi’s RP2350 MCU and offers an HSTX connector for DVI video output.

The Adafruit Metro ESP32-P4 Hydra is available for $34.95 on the Adafruit store . Note that the board currently ships with the original ESP32-P4 v1 chipset rather than the newer ESP32-P4X v3 revision .

Debashis Das is a technical content writer and embedded engineer with over five years of experience in the industry. With expertise in Embedded C, PCB Design, and SEO optimization, he effectively blends difficult technical topics with clear communication

Support CNX Software! Donate via cryptocurrencies , become a Patron on Patreon, or purchase goods on Amazon or Aliexpress . We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

Challenger+ RP2350 WiFi6/BLE5 board combines Raspberry Pi RP2350 MCU with ESP32-C6 WiFi 6 and Bluetooth 5.4 LE module

Makerfabs MaTouch ESP32-P4 10.1-inch HMI display features 4G LTE and Ethernet connectivity, a 2MP camera

Microflex MCUs – Tiny USB development boards based on ESP32-S3, ESP32-S2, ESP32-C3, ESP32-C6, or Raspberry Pi RP2040 (Crowdfunding)

StackyFi ESP32-S3 board features camera connector, 40-pin GPIO header for Raspberry Pi HAT (Crowdfunding)

Waveshare ESP32-P4 + ESP32-C6 PoE development board targets HMI and IoT applications

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry