
在 YouTube 上观看了一些关于废旧卫星天线“变废为宝”的趣味视频后,Melan 也跃跃欲试,设法弄到了一台专为海事用途打造的 Intellian i4 天线,并着手对其进行改装。
Melan 首先需要让天线相信它仍然位于船上,于是使用 RP2040 单片机和 RS-422 模块发送 NMEA 语句。这样做是为了向 i4 传达这艘“船”的“航向”,尽管 Melan 实际上是将这套设备固定在陆地上使用的。随后,仅仅给该公司发了一封简单的电子邮件,就成功让 Intellian 软件在这台天线上运行了起来。
但是,如果不使用这套软件,能对其进行控制吗?方法是监听软件与天线控制单元(Antenna Control Unit)之间的通信,并对代码进行反编译。完成这些步骤后,梳理出一套协议说明就相对容易了,并且弄清了如何仅通过发送方位角(azimuth)和仰角(elevation)指令来控制天线的指向。
我们过去也曾介绍过其他出色的卫星设备,比如几年前对一款卡车追踪器的拆解。如果你手头工作台上有能够监听太空卫星(或向其发射信号)的有趣设备,欢迎通过我们的爆料热线告知我们。
本文来源:https://hackaday.com/2026/10/27/hacking-a-marine-radio-dish/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Having watched some fun videos on repurposed satellite dishes on YouTube, [Melan] wanted to get in on the action, managed to source an Intellian i4 — a dish built for marine use — and set about hacking it.
[Melan] first needed to convince the antenna that it was still on a boat by using an RP2040 microcontroller and an RS-422 module to send NMEA sentences. This was necessary to tell the i4 the “heading” of the “boat”, even though [Melan] was really using the rig stationary on land. From there, a simple email to the company itself sufficed to get the Intellian software running on the antenna.
But could it be controlled without the software?. Sniff the communications between the software and the Antenna Control Unit, and decompile the code. This done, it was relatively straightforward to put together a protocol description and figure out how to command the antenna where to point simply by issuing commands for azimuth and elevation.

We’ve featured other great bits of satellite equipment before, like this truck tracker teardown from a few years ago. If you’ve got some nice equipment on the bench that listens in on (or transmits out to) birds in space, don’t hesitate to let us know on the tipsline .